Węże pneumatyczne
Węże pneumatyczne Parker są stosowane w wielu instalacjach pneumatycznych, jak urządzenia pakujące, roboty przemysłowe, obrabiarki oraz zrzutowe obiekty produkcyjne. Pozostałe przewody są przeznaczone do zastosowań specjalnych, jak węże do
-
Low-Temperature Hydraulic Hose
Whether you need a hydraulic hose replacement or are building new equipment, Parflex low-temperature hoses offer optimum hose flexibility in operating environments with low ambient temperatures. Designed to withstand and perform successfully in low temperatures, these hoses are ideal for applications that involve hydraulic forklifts in cold or refrigerated areas, aerial lift construction trucks, agriculture equipment in cold climates, or material handling equipment in commercial freezers. Parflex low temperature hoses also feature a 10%-30% smaller O.D. than rubber and are up to 70% lighter. Similar to 3TR18/30CT hose but with a lower operating temperature (-70°F).
Markets:
• Material Handling
• Construction
• Agriculture
Features/Benefits:
• Matte cover for low coefficient of friction
• Low length change under pressure
• Superior flexibility in cold temperature applications
• Better bend radius than SAE J517 and 100R18
• 3000 psi constant pressure
Applications:
• Excellent over-the-sheave in lift truck applications
• Cold storage or refrigerated areas<
• Construction and agriculture equipment in cold climates
Certifications/Compliance:
• Meets/Exceeds SAE 100R17 or SAE 100R18 (dependent on part number)
Technical Specifications:
• Hose I.D. is nominal
• Hose O.D. is maximum -
Diagnostic Hose for Small Bore Fluid Transfer - 56DH 6000 PSI
Parflex 56DH diagnostic hose offers the best in class performance by reducing the volume of fluid in the system over -4 rubber hose. This diagnostic hose has a compact O.D., making it the optimal solution for applications where a small diameter hose is desired. It is also a very lightweight hose and, coupled with its good flexibility characteristics, allows for simplified routing and installation in small bore fluid transfer applications. It is often used as a replacement for steel tubing, which is much heavier and stiffer. In addition, it operates in temperatures up to 200°F and at 6,000 psi, withstands a minimum of 200,000 impulse cycles without leakage or malfunction.
Markets:
• Industrial
• Material Handling
• Mining
• Mobile Equipment
Features/Benefits:
• Lightweight and flexible for easy routing
• Twin or multi-line configurations available to accommodate various application requirements
• Compact O.D. for easier installation in diagnostic equipment and hydraulic and pneumatic systems
Applications:
• Hydraulic and pneumatic systems where a small diameter hose is desired
• Diagnostic hydraulic lines
• All Mobile and industrial equipment where remote mounting of system pressure is desired
• Construction equipment
• Ag/Turf equipment
Certifications/Compliance:
• MSHA Compliant Cover
Technical Specifications:
• Hose I.D. is nominal
• Hose O.D. is maximum -
DuraGard™ Flame Resistant Polyurethane Hose - 83FR
Parflex DuraGard™ thermoplastic hose features weld spatter resistance, ease of flex, and a compact bend radius. It is available in twin-line and multi-line configurations, as well as multiple jacket colors to allow for quick identification. The specially formulated polyurethane tube and the flame and weld spatter resistant cover create an ideal, long-lasting solution for fluid handling applications. Review the literature listed under the Product Support tab for more information regarding the DuraGard™ Flame Resistant Polyurethane hose.
Markets:
• Fluid Handling
• Industrial Pneumatic
• Construction
Features/Benefits:
• Weld spatter resistant for added protection
• Excellent abrasion resistance allowing for a long-lasting, multipurpose hose
• Compact bend radius for ease of installation and usage
• Twinline hose or multi-line hose constructions available to meet specific application requirements
• Multiple jacket colors available for quick identification
Applications:
• General purpose hose for air and water
• Robotic welding
Certifications/Compliance:
• MSHA Accepted
• Non-conductive per SAEJ343 test procedures for thermoplastic hose
• UL94HB compliant
Technical Specifications:
• Tube: Specially formulated polyurethane
• Reinforcement: Fiber
• Cover: Polyurethane
• Non-conductive per SAEJ343 test procedures for thermoplastic hose
• Hose I.D. is nominal
• Hose O.D. is maximum -
High Pressure Hose - 580N/H580N/588N
Parker’s 580N/H580N/588N High Pressure Hose meets SAE 100R8 specifications and, with a lighter weight and smaller O.D. than the 100R2, replaces 100R2 rubber hose wherever greater flexibility, fluid compatibility, and cover durability are required. This high pressure hydraulic hose features a highly developed design, available in twin-line and multi-line constructions, to ensure high performance in hydraulic and pneumatic circuits and systems applications. Offering superior features, such as a reduced weight and improved flexing capabilities, the Parflex 580N/H580N/588N High Pressure Hose combines a variety of advantages to fulfill application requirements in expanding fluid handling and industrial pneumatic markets.
Markets:
• Fluid Handling
• Industrial
• Mobile Equipment
Features/Benefits:
• Twin and multi-line available to fulfill diverse application requirements
• Lighter weight and smaller O.D. than 100R2 for improved handling and routing
• Replaces 100R2 rubber hose wherever greater flexibility, fluid compatibility, and cover durability are required
Applications:
• Hydraulic and pneumatic circuits and systems
• Construction Equipment
• Factory Automation
• Machine Tools
• Material Handling Equipment
• Turf Equipment
Certifications/Compliance:
• Meets/Exceeds SAE 100R8 specifications
• 580N MSHA Approved
• 588N Meets SAE J517 for less than 50 micro-amps leakage under 75,000 volts per foot
Technical Specifications:
• Tube: Nylon (588N has a non-conductive core tube for applications where electric shock is a potential danger for operators)
• Reinforcement: Fiber
• Cover: 580N Black polyurethane, perforated
588N Orange polyurethane, non-perforated
H580N Black polyurethane, non-perforated
• Burst pressures are rated at 73°F (23°C)
• Hose I.D. is nominal
• Hose O.D. is maximum -
Parker Hydraulic Hose – 520N/528N
Parker's 520N/528N Thermoplastic Hydraulic Hose is a high pressure hose that meets SAE 100R8 specifications and, with a lighter weight and smaller O.D. than the 100R2. It replaces 100R2 rubber hose wherever greater flexibility, fluid compatibility, and cover durability are required. This flexible hose features a highly developed design, available in twin-line and multi-line constructions, to ensure high performance in hydraulic and pneumatic circuits and systems applications. Offering superior features, such as a reduced weight and improved flexing capabilities, the Parflex 520N/528N High Pressure Hose combines a variety of advantages to fulfill application requirements in expanding fluid handling and industrial pneumatic markets.
Markets:
• Machine Tool
• Industrial
• Industrial Pneumatic
• Construction
• Mobile Equipment
Features/Benefits:
• Lighter and smaller O.D. than 100R2 for ease of assembly
• Fast response
• Working pressure up to 5,000 psi
Applications:
• Hydraulic and pneumatic circuits and systems
• Ideal in hot water applications
• Material Handling Equipment
• Machine tool
• Construction Equipment
Certifications/Compliance:
• Meets/exceeds SAE 100R8
• 520N MSHA accepted
• 528N meets SAE J517 for less than 50 micro-amps leakage under 75,000 volts per foot
Technical Specifications:
• Tube: Nylon
• Reinforcement: Aramid fiber
• 520N Cover: Black, Polyurethane – perforated
• 528N Cover: Orange (non-conductive), Polyurethane – non-perforated
• Burst pressures rated at 73°F /23°C
• Uses 55 or 56 Series fittings – dependent on the size
• Twin and multi-line designs available
• Hose I.D. is nominal -
Chemical Resistant Heavy Wall PTFE Smoothbore Hose - 929/929B
Parker’s 929/929B Heavy Wall Smoothbore PTFE Hose features improved kink resistance and enhanced resistance to gas permeation over 919/919B hose due to an increased wall thickness. These PTFE hoses have exceptional chemical compatibility and handle temperatures as high as +450°F. They are used in numerous applications including but not limited to chemical transfer lines, high temperature general hydraulics, and coolant lines. The PTFE core tube resists moisture and offers the lowest coefficient of friction of any known plastic, therefore minimizing pressure drops and deposits.
PTFE hoses are less susceptible to cracking from stress or flexing than metal hoses. The 929 hose meets SAE 100R14A and is constructed of a natural FDA compliant PTFE tube while 929B hose meets SAE 100R14B and is manufactured with a black static-dissipating PTFE core tube. Parker 919B should be used when conveying non-conducting fluids such as oils, paints, fuels, or steam.
Markets:
• Fluid Handling
• Medical
• Oilfield Service
• Transportation
• Military
Features/Benefits:
• Tight bend radius for easy handling and smooth operation
• Increased kink resistance
• Enhanced resistance to gas permeation due to increased PTFE wall thickness (.040”)
Applications:
• Chemical transfer lines
• General hydraulics
• Compressed air/gases
• Adhesive dispensing
• Coolant lines
• Medical gases
Certifications/Compliance:
• Meets/Exceeds SAE 100R14A - 929
• Meets/Exceeds SAE 100R14B - 929B
• FDA CFR 177.1550 (Natural tube)
Technical Specifications:
• Tube: 929 - Natural FDA Compliant PTFE
929B - Black Static-Dissipative PTFE
• Reinforcement: 304 Stainless Steel braid
• Use hose type 929B with static-dissipative core tube when conveying non-conducting fluids such as oils, paints, fuels, steam, etc.
• Minimum burst pressure is 4x maximum working pressure at 73°F (23°C)
• Uses 91N Series fittings
• Hose I.D. is nominal
• Hose O.D. is maximum -
Static Dissipative Smoothbore PTFE Hose with Silicone Jacket -...
Parker's 929BJ Smoothbore Heavy Wall PTFE Hose features a specially designed brown silicone jacket to provide a clean, smooth cover to protect the stainless steel wire reinforcement against wear, fraying and contaminants. The hose is constructed of a static-dissipative PTFE core tube, reinforced with a 304 stainless steel braid, and protected with an extruded silicone cover for added durability.
929BJ assemblies are used in numerous applications including but not limited to chemical transfer lines, high temperature general hydraulics, and coolant lines.
Markets:
• Fluid Handling
• Compressed Gas
• Transportation
• Military
Features/Benefits:
• Silicone cover protects the stainless steel wire reinforcement against wear and fraying
• Silicone cover provides clean, smooth cover and prevents contaminants from accumulating in braid
• Tight bend radius
• Improved kink resistance over .030” wall PTFE hose
• Enhanced resistance to gas permeation due to increased PTFE wall thickness
• Steam cleanable
Applications:
• Vacuum lines for high temperature autoclaves
• General hydraulics
• Compressed air/gases
Technical Specifications:
• Tube: Black static-dissipative PTFE
• Reinforcement: 304 Stainless Steel braid
• Cover: Silicone cover
• Cover must be skived prior to fitting attachment
• Minimum burst pressure is 4x maximum working pressure at 73°F (23°F)
• Use with 91N Series Fittings
• Hose I.D. is nominal -
General Purpose Transfer Hose - B9 Series
Parker’s B9 General Purpose Transfer Hose is a very flexible hose offering exceptional flexibility. It is a lightweight hose designed for use in applications that involve low pressure transmission of air, oil, water and coolants.
Markets:
• Fluid Handling
• Industrial
• Mobile Equipment
• Factory Automation
Features/Benefits:
• Excellent flexibility for ease of installation
• Lightweight for simplified routing and usage
Applications:
• Low pressure transmission of air, oil, water, and coolants
• Robotics
Technical Specifications:
• Tube: Specially formulated polyurethane
• Reinforcement: Fiber
• Cover: Red specially formulated polyurethane, non-perforated
• Hose I.D. is nominal
• Hose O.D. is maximum -
Fast Response Constant Pressure Hose – 575X/575XN Series
Parflex 575X Fast Response Constant Pressure Hoses are designed for applications that involve offshore drilling and require fast and accurate response time. The 575X is capable of operating at a 5,000 psi constant pressure. It is MSHA accepted and exhibits rapid response even over long lengths, making it the optimal solution for marine and oilfield service market applications.
Markets:
• Oil & Gas
• Marine
• Industrial
Features/Benefits:
• Fast response even over longer lengths
• Reduced weight without compromising performance
• Resistant to pin hole leaks
•5000 psi constant working pressure
Applications:
• Applications requiring fast and accurate response time
• Oilfield service
• Offshore drilling
Certifications/Compliance:
• MSHA Accepted
Technical Specifications:
• Tube: Nylon
• Reinforcement: Fiber
• Cover: Black polyurethane except 1/2" size. 575XN-8 has a Black Nylon cover. Non-perforated cover.
• Working pressures rated at 73°F (23°C)
• Hose I.D. is nominal
• Hose O.D. is maximum -
Wąż PTFE Smoothbore odporny na chemikalia — 919/919B/919J/919U
Odporne na chemikalia węże PTFE Smoothbore firmy Parker cechują się wyjątkową kompatybilnością chemiczną i odpornością na temperaturę do +450°F. Zespoły 919/919B są wykorzystywane w różnych aplikacjach, między innymi w przewodach przesyłowych chemikaliów, wysokotemperaturowych instalacjach hydraulicznych ogólnego zastosowania oraz przewodach płynu chłodzącego. Rurka wewnętrzna z PTFE jest odporna na wilgoć i oferuje najniższy współczynnik tarcia spośród wszystkich znanych tworzyw sztucznych, minimalizując w ten sposób spadki ciśnienia i osady. Węże z PTFE są mniej podatne na pękanie pod wpływem naprężeń lub zginania niż węże metalowe. Wąż 919 spełnia wymagania normy SAE 100R14A i jest wykonany z rurki z naturalnego PTFE spełniającej wymagania FDA, a wąż 919B z czarną rurką wewnętrzną PTFE zapobiegającą gromadzeniu elektryczności statycznej spełnia wymagania normy SAE 100R14B. Węża 919B firmy Parker nie należy używać do przesyłu płynów nieprzewodzących, takich jak oleje, farby, paliwa lub para. Wąż PTFE 919J firmy Parker ma silikonowy płaszcz z wytłaczanego silikonu w celu zapewnienia czystej i gładkiej powłoki, a wąż 919U ma poliuretanowy płaszcz odporny na uszkodzenia i przetarcia, który chroni wzmocnienia z drutu ze stali nierdzewnej przed zużyciem, strzępieniem i zanieczyszczeniami. Oba te węże są wykonane z rurki wewnętrznej z naturalnego PTFE spełniającego wymagania FDA wzmocnionej oplotem ze stali nierdzewnej 304. Płaszcz poliuretanowy węży 919U zmniejsza zakres minimalnej i maksymalnej temperatury (od -40°F do +275°F). Płaszcz silikonowy węża PTFE 919J zmniejsza tylko minimalną temperaturę roboczą (od -40°F do +450°).Rynki:
• Transport płynów
• Przemysł medyczny
• Wydobycie ropy naftowej
• Transport
• Technika wojskowa
• Sprężony gazCechy i korzyści
• Doskonała kompatybilność chemiczna zapewnia skuteczny przesył chemikaliów między liniami
• Odporność na ekstremalne temperatury od -100°F do +450°F
• Odporność na wilgoć
• Niskie tarcie minimalizuje spadki ciśnienia i osady
• Możliwość czyszczenia parą
• Silikonowa powłoka zapewnia czystą oraz odporną na uszkodzenia i przetarcie poliuretanową powłokę chroniącą wzmocnienie z drutu ze stali nierdzewnej przed zużyciem, strzępieniem i zanieczyszczeniamiZastosowania
• Przewody przesyłowe substancji chemicznych
• Instalacje hydrauliczne ogólnego zastosowania
• Sprężone powietrze / gazy
• Dozowanie klejów
• Przewody płynu chłodzącego
• Gazy medyczneCertyfikacje/zgodność
• Spełnia/przekracza wymagania normy SAE 100R14A — 919/919J
• Spełnia/przekracza wymagania normy SAE 100R14B — 919B
• Spełnia/przekracza wymagania normy SAE 100R14A z wyjątkiem zakresu temperatur od -40°F do +275°F — 919U
• FDA CFR 177.1550 (naturalna rurka)Dane techniczne
• Rura: 919/919J/919U — naturalny PTFE spełniający wymagania FDA 919B — czarny PTFE zapobiegający gromadzeniu elektryczności statycznej
• Wzmocnienie: Oplot ze stali nierdzewnej 304
• Wąż typu 919B z rurką wewnętrzną zapobiegającą gromadzeniu elektryczności statycznej jest przeznaczony do przesyłu płynów nieprzewodzących, takich jak oleje, farby, paliwa, para itp.
• Ciśnienie rozrywające wynosi czterokrotność maks. ciśnienia roboczego w temperaturze 73°F (23°C).
• Wykorzystuje łączniki serii 91N
• Średnica wewnętrzna węża to wartość nominalna
• Średnica zewnętrzna węża to wartość maksymalna
• Powłoka 919J: wytłaczany silikon
• Powłoka 919U: poliuretan
• Powłokę należy usunąć przed zamocowaniem łącznika
• Inne kolory dostępne na zamówienie -
NEXLO PVC General Purpose Hose, Series 150
Parker's Series 150 PVC General Purpose Hose is lightweight and resistant to abrasion and weathering for maximum performance. It is electrically nonconductive to protect operators/users from electrical shock, and is available in multiple colors for easy identification. Series 150 is designed as a versatile air and water hose for many common industrial applications.
Markets:
• Agriculture
• Construction
• Lawn & Garden
• General Industrial
Features/Benefits:
• Tube: Black PVC for versatile service to 150°F; ARPM Class B.
• Reinforcement: Multiple textile plies for strength and durability.
• Cover: PVC for resistance to abrasion, cuts, gouging, scuffs and weathering.
• Cover Colors: Standard red; optional black, blue, gray and yellow for easy identification.
Applications:
• Air
• Diluted chemicals
• Water
• Air compressors and pneumatic tools, including those subject to light oil mists for lubrication
• Manufacturing assembly lines
• Spray systems
• Water cooling systems for equipment/machinery
Safety/Technical:
• Do not use with oil or refined fuel.
• Electrically nonconductive with a minimum resistance of one megohm per inch at 1000 volts DC.
• The user must determine if the hose is suitable for applications subject to electrical hazard. Contact us for additional information.
Warnings:
• Working pressures are at +68°F (+20°C). Higher temperatures reduce the available working pressure.
• Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to NAHAD Industrial Hose Assembly Guidelines. -
NEXTRILE Premium PVC General Purpose Hose, Series 155
Parker's Series 155 PVC General Purpose Hose is lightweight and resistant to abrasion and weathering for maximum performance. It is electrically nonconductive, protecting operators/users from electrical shock, and is available in multiple colors for easy identification. The hose is packaged in long continuous lengths for efficient inventory management and maximum utility in hard to reach job sites. Series 155 is designed to look and feel like rubber, stays flexible a low temperatures, and is a versatile hose for many common industrial applications.
Markets:
• Agriculture
• Construction
• Lawn & Garden
• General Industrial
Features/Benefits:
• Tube: Prime black PVC for versatile service to -22°F to 150°F; ARPM Class B.
• Reinforcement: Multiple textile plies for strength and durability.
• Cover: PVC for resistance to abrasion, cuts, gouging, scuffs and weathering.
• Cover Colors: Standard red; optional blue and yellow for easy identification.
Applications:
• Air
• Diluted chemicals
• Water
• Air compressors and pneumatic tools, including those subject to light oil mists for lubrication
• Manufacturing assembly lines
• Spray systems
• Water cooling systems for equipment/machinery
Safety/Technical:
• Do not use with oil or refined fuel.
• Electrically nonconductive with a minimum resistance of one megohm per inch at 1000 volts DC.
• The user must determine if the hose is suitable for applications subject to electrical hazard. Contact us for additional information.
Warnings:
• Working pressures are at +68°F (+20°C). Higher temperatures reduce the available working pressure.
• Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to NAHAD Industrial Hose Assembly Guidelines.