Złącza bezwyciekowe

Nyple serii NS (płyny hydrauliczne) do 2500 psi łączą się ze złączami serii NS.
Seria NS marki Parker obejmuje podwójnie odcinające szybkozłącza bezwyciekowe, które minimalizują wycieki i przedostawanie się powietrza do przewodów podczas ich podłączania i odłączania. Nypel poddaje się obróbce cieplnej, aby wytrzymywał nagłe wzrosty ciśnienia. Dodatnia blokada zaworu zapobiega hamowaniu przepływu.

Charakterystyka techniczna:
• Rozmiary: od 3/8 cala do 1 cala
• Materiały: stal
• Końcówki przyłączy: wewnętrzne NPSF, wewnętrzne BSPP, wewnętrzne ORB
• Wykonania uszczelnień: nitryl, EPR, kauczuk fluorowy

Rynki:
• Przemysł
• Budownictwo
• Zakłady użyteczności publicznej
• Górnictwo

Cechy/zalety:
• Połączenie wciskowe ułatwia montaż jedną ręką
• Hartowany korpus nypla zapewnia większą trwałość.
• Zawory bezwyciekowe minimalizują utratę cieczy podczas odłączania przewodów, co pozwala ograniczyć zanieczyszczenie środowiska i uniknąć zagrożeń związanych z wyciekami.
• Zawory bezwyciekowe minimalizują ilość powietrza przedostającego się do układu podczas podłączania przewodów hydraulicznych i zapobiegają w ten sposób zbyt szybkiemu zużywaniu się podzespołów układu.
• Fizyczny ogranicznik zaworu zapobiega blokowaniu przepływu i zapewnia płynne działanie.

Zastosowania:  
• Ręczne narzędzia hydrauliczne
• Sprzęt zakładów użyteczności publicznej
• Sprzęt górniczy

FEM and FEC Series Nipples (hydraulic) up to 4568 psi, meet or exceed design and performance requirements of Hydraulic Tool Manufacturer's Association (HTMA - ISO 16028) standards, and connect with FEM Series Couplers. FEC nipples are designed to connect under pressure, in situations where fluid lines contain residual pressure caused by thermal expansion.
Parker's FEM Series are double shut off, non-spill quick couplings designed to minimize spillage and air inclusion when connecting or disconnecting and are interchangeable with other products complying with HTMA - ISO 16028. FEM Couplers and nipples are available in a range of sizes as well as male and female fitting ends to be versatile for use in applications with pressures up to 4568 psi.

Technical Characteristics:
• FEM Sizes: 1/4” – 1”
• FEC (Connect Under Pressure) Sizes: 1/2", 5/8", 3/4"
• Materials: Steel
• Port Ends: Female NPSF, Female ORB, Male Bulkhead Flare, Male Bulkhead Face Seal
• Seal Options: Nitrile/Polyurethane, EPR, Fluorocarbon

Markets:
• Industrial
• Construction
• Utility
• Agriculture

Features/Benefits:
• All sizes are globally interchangeable with other couplings complying with HTMA (ISO 16028) standards
• Non-spill flush face valves minimize fluid loss when disconnecting, to reduce environmental contamination and avoid safety hazards caused by spillage.
• Flush face valves minimize the amount of air that can enter the system when connecting fluid lines, thus preventing accelerated wear of the system's components.
• Male bulkhead fitting ends for panel or plate mounting options
• FEC nipples provide the ability to connect under residual pressure caused by thermal expansion.

Applications:
• Skid loader attachments
• Hydraulic tools
• Constuction equipment attachments
• Industrial hydraulic lines
• Agricultural implements
• Coolant fill and drain lines - Contact QCD for a brass, FEM style drain port nipple that is recommended for use by the Technology and Maintenance Council of the American Trucking Association, TMC Recommended Practice 353

FEM Series Couplers (hydraulic) up to 4568 psi, meet or exceed design and performance requirements of Hydraulic Tool Manufacturer's Association (HTMA - ISO 16028) standards and connect with FEM/FEC Series Nipples. FEC Nipples provide the ability to connect under pressure.
Parker's FEM Series are double shut off, non-spill quick couplings designed to minimize spillage and air inclusion when connecting or disconnecting and are interchangeable with other products complying with HTMA - ISO 16028. FEM Couplers and nipples are available in a range of sizes as well as male and female fitting ends to be versatile for use in applications with pressures up to 4568 psi.

Technical Characteristics:
• Sizes: 1/4” – 1”
• Material: Steel
• Port Ends: Female NPSF, Female ORB, Male Bulkhead Flare, Male Bulkhead Face Seal
• Seal Options: Nitrile/Polyurethane, EPR, Fluorocarbon

Markets:
• Industrial
• Construction
• Utility
• Agriculture

Features/Benefits:
• Push-to-connect operation makes connection easy with one hand
• All sizes are globally interchangeable with other couplings complying with HTMA (ISO 16028) standards
• Non-spill flush face valves minimize fluid loss when disconnecting, to reduce environmental contamination and avoid safety hazards caused by spillage.
• Flush face valves minimize the amount of air that can enter the system when connecting fluid lines, thus preventing accelerated wear of the system's components.
• Optional sleeve lock guards against accidental disconnection

Applications:
• Skid loader attachments
• Hydraulic tools
• Constuction equipment attachments
• Industrial hydraulic lines
• Agricultural implements
• Coolant fill and drain lines

FF Series Couplers (hydraulic) up to 5000 psi, meet the requirements of Hydraulic Tool Manufacturer's Association (HTMA - ISO 16028) standards in the 3/8" size, and connect with FF/FC Series Nipples. FC Nipples provide the ability to connect under pressure.
Parker's FF Series are double shut, off non-spill quick couplings designed to minimize spillage and air inclusion when connecting or disconnecting. Couplers have a sleeve locking mechanism to help prevent accidental disconnection. Couplers and nipples are available in a range of sizes to be versatile for use in applications with pressures up to 5000 psi.

Technical Characteristics:
• Sizes: 1/4” – 1”
• Material: Steel
• Port Ends: Female NPSF, Female NPTF, Female UNF, Female BSPP
• Seal Options: Nitrile/Polyurethane, EPR, Fluorocarbon

Markets:
• Industrial
• Construction
• Utility
• Agriculture

Features/Benefits:
• Push-to-connect operation makes connection easy with one hand
• 3/8" size is globally interchangeable with other couplings complying with HTMA (ISO 16028) standards
• Non-spill flush face valves minimize fluid loss when disconnecting, to reduce environmental contamination and avoid safety hazards caused by spillage.
• Flush face valves minimize the amount of air that can enter the system when connecting fluid lines, thus preventing accelerated wear of the system's components.
• Sleeve lock guards against accidental disconnection

Applications:
• Hydraulic tools
• Constuction equipment attachments
• Industrial hydraulic lines
• Agricultural implements
• Coolant fill and drain lines

Złącza serii NS (płyny hydrauliczne) do 2500 psi łączą się z nyplami serii NS.
Seria NS marki Parker obejmuje podwójnie odcinające szybkozłącza bezwyciekowe, które minimalizują wycieki i przedostawanie się powietrza do przewodów podczas ich podłączania i odłączania. Złącze ma wytrzymałą tuleję, która jest odporna na nagłe wzrosty ciśnienia. Dodatnia blokada zaworu zapobiega hamowaniu przepływu.

Charakterystyka techniczna:
• Rozmiary: od 3/8 cala do 1 cala
• Materiały: stal
• Końcówki przyłączy: wewnętrzne NPSF, wewnętrzne BSPP, wewnętrzne ORB
• Wykonania uszczelnień: nitryl, EPR, kauczuk fluorowy

Rynki:
• Przemysł
• Budownictwo
• Zakłady użyteczności publicznej
• Górnictwo

Cechy/zalety:
• Połączenie wciskowe ułatwia montaż jedną ręką
• Tuleja zamykająca zapobiega przypadkowemu rozłączeniu
• Wytrzymała tuleja złączki zwiększająca trwałość
• Zawory bezwyciekowe minimalizują utratę cieczy podczas odłączania przewodów, co pozwala ograniczyć zanieczyszczenie środowiska i uniknąć zagrożeń związanych z wyciekami.
• Zawory bezwyciekowe minimalizują ilość powietrza przedostającego się do układu podczas podłączania przewodów hydraulicznych i zapobiegają w ten sposób zbyt szybkiemu zużywaniu się podzespołów układu.
• Fizyczny ogranicznik zaworu zapobiega blokowaniu przepływu i zapewnia płynne działanie.

Zastosowania:  
• Ręczne narzędzia hydrauliczne
• Sprzęt zakładów użyteczności publicznej
• Sprzęt górniczy

H Series Couplers (hydraulic) 10,000 psi, meet the requirements of Hydraulic Tool Manufacturer's Association (HTMA) standards, and connect only with FH Series Nipples. Parker's FH Series are high pressure non-spill quick couplings that will not connect with lower pressure quick couplings. The red color makes these couplings easy to identify as high pressure (10,000 psi). The coupler sleeve lock feature guards against accidental disconnection. Couplers and nipples are available in 3/8" size only.

Technical Characteristics:
• Size: 3/8"
• Material: Steel
• Port Ends: Female NPTF, Female BSPP
• Seal Options: Nitrile, EPR, Fluorocarbon

Markets:
• Rescue
• Industrial
• Construction
• Utility

Features/Benefits:
• Push-to-connect operation makes connection easy with one hand
• Meets HTMA (ISO 16028) standards but will NOT connect with lower pressure flush face couplings
• Red color finish makes it easy to visually identify as a high pressure connection
• Non-spill flush face valves minimize fluid loss when disconnecting, to reduce environmental contamination and avoid safety hazards caused by spillage.
• Flush face valves minimize the amount of air that can enter the system when connecting fluid lines, thus preventing accelerated wear of the system's components.
• Sleeve lock guards against accidental disconnection

Applications:  
• Hydraulic crimpers, cutters, benders, clamps, wedges
• Rescue equipment
• High pressure test equipment
• High pressure hydraulic equipment

FH Series Nipples (hydraulic) 10,000 psi, meet the requirements of Hydraulic Tool Manufacturer's Association (HTMA) standards, and connect only with FH Series Couplers.
Parker's FH Series are high pressure non-spill quick couplings that will not connect with lower pressure quick couplings. The red color makes these couplings easy to identify as high pressure (10,000 psi). Couplers and nipples are available in 3/8" size only.

Technical Characteristics:
• Size: 3/8"
• Material: Steel
• Port Ends: Female NPTF, Female BSPP
• Seal Options: Anti blow-out Nitrile/PTFE bonded seal, EPR, Fluorocarbon

Markets:
• Rescue
• Industrial
• Construction
• Utility

Features/Benefits:
• Push-to-connect operation makes connection easy with one hand
• Meets HTMA (ISO 16028) standards but will NOT connect with lower pressure flush face couplings
• Red color finish makes it easy to visually identify as a high pressure connection
• Non-spill flush face valves minimize fluid loss when disconnecting, to reduce environmental contamination and avoid safety hazards caused by spillage.
• Flush face valves minimize the amount of air that can enter the system when connecting fluid lines, thus preventing accelerated wear of the system's components.
• Sleeve lock guards against accidental disconnection

Applications:  
• Hydraulic crimpers, cutters, benders, clamps, wedges
• Rescue equipment
• High pressure test equipment
• High pressure hydraulic equipment

Snap-tite 71 Series Couplers (hydraulic) up to 10,000 psi connect with Snap-tite 71 Series Nipples.
These are double shut-off, non-spill, push to connect quick couplings for high pressure applications. Couplers and nipples  are available in a wide range of sizes up to 2 inch with material options including steel, 316 stainless steel, or high pressure stainless steel.

Note: The 71-3 style couplers and nipples are interchangeable with the previous Snap-tite design couplers and nipples in sizes 3/8", 1/2", and 3/4". Old style 1" couplers and nipples (71-2C16 and 71-2N16) are not interchangeable with the 71-3 design.

Technical Characteristics:
• Sizes: 1/4” – 2”
• Materials: Steel, 316 Stainless Steel, High Pressure Stainless Steel
• Port Ends: Female NPTF, Female SAE
• Seal Options: Nitrile, Fluorocarbon, Ethylene Propylene
• Other Coupler options include: Sleeve Lock

Markets:
• Industrial
• Oil and Gas
• Construction

Features/Benefits:
• Push-to-connect operation makes connection easy
• Corrosion resistant 316 stainless steel and high pressure stainless steel material options for demanding applications
• Non-spill valves minimize fluid loss when disconnecting to reduce environmental contamination and avoid safety hazards caused by spillage.
• Flush face valves minimize the amount of air that can enter the system when connecting fluid lines

Applications:  
• In-plant equipment
• Oil exploration and production
• Construction Equipment

Snap-tite 71 Series Nipples (hydraulic) up to 10,000 psi connect with Snap-tite 71 Series Couplers.
These are double shut-off, non-spill, push to connect quick couplings for high pressure applications. Couplers and nipples  are available in a wide range of sizes up to 2 inch with material options including steel, 316 stainless steel, or high pressure stainless steel.

Note: The 71-3 style couplers and nipples are interchangeable with the previous Snap-tite design couplers and nipples in sizes 3/8", 1/2", and 3/4". Old style 1" couplers and nipples (71-2C16 and 71-2N16) are not interchangeable with the 71-3 design.

Technical Characteristics:
• Sizes: 1/4” – 2”
• Materials: Steel, 316 Stainless Steel, High Pressure Stainless Steel
• Port Ends: Female NPTF, Female SAE
• Seal Options: Nitrile, Fluorocarbon, Ethylene Propylene

Markets:
• Industrial
• Oil and Gas
• Construction

Features/Benefits:
• Push-to-connect operation makes connection easy
• Corrosion resistant 316 stainless steel and high pressure stainless steel material options for demanding applications
• Non-spill valves minimize fluid loss when disconnecting to reduce environmental contamination and avoid safety hazards caused by spillage.
• Flush face valves minimize the amount of air that can enter the system when connecting fluid lines

Applications:  
• In-plant equipment
• Oil exploration and production
• Construction Equipment

FS Series Couplers (2000 psi), connect with FS Series Nipples.
Parker's FS Series are stainless steel non-spill quick couplings with flush face valves designed to minimize spillage and air inclusion when connecting or disconnecting to result in minimal environmental contamination. These quick couplings are ideal for closed system transfer and dispensing of chemicals and other fluids. FS Couplers and nipples are available in a range of sizes.

Technical Characteristics:
• Sizes: 1/4” – 1”
• Materials: 316 Stainless Steel
• Port Ends: Male NPT, Female NPTF, Female UNF
• Seal Options: Fluorocarbon, Ethylene Propylene, Neoprene

Markets:
• Chemical processing and handling
• Food processing
• Corrosive fluid handling
• Agriculture

Features/Benefits:
• Push-to-connect operation makes connection easy with one hand
• Corrosion resistant 316 stainless steel material
• Fluorocarbon seals are compatible with many chemicals
• Non-spill valves minimize fluid loss when disconnecting, to reduce environmental contamination and avoid safety hazards caused by spillage.
• Flush face valves minimize the amount of air that can enter the system when connecting fluid lines

Applications:  
• Chemical dispensing systems
• Chemical processing
• Food processing
• Corrosive media transfer

FS Series Nipples (2000 psi) connect with FS Series Couplers.
Parker's FS Series are stainless steel non-spill quick couplings with flush face valves designed to minimize spillage and air inclusion when connecting or disconnecting to result in minimal environmental contamination. These quick couplings are ideal for closed system transfer and dispensing of chemicals and other fluids. FS Couplers and nipples are available in a range of sizes.

Technical Characteristics:
• Sizes: 1/4” – 1”
• Materials: 316 Stainless Steel
• Port Ends: Male NPT, Female NPTF, Female UNF
• Seal Options: Fluorocarbon, Ethylene Propylene, Neoprene

Markets:
• Chemical processing and handling
• Food processing
• Corrosive fluid handling
• Agriculture

Features/Benefits:
• Push-to-connect operation makes connection easy with one hand
• Corrosion resistant 316 stainless steel material
• Fluorocarbon seals are compatible with many chemicals
• Non-spill valves minimize fluid loss when disconnecting, to reduce environmental contamination and avoid safety hazards caused by spillage.
• Flush face valves minimize the amount of air that can enter the system when connecting fluid lines

Applications:  
• Chemical dispensing systems
• Chemical processing
• Food processing
• Corrosive media transfer

FF and FC Series Nipples (hydraulic) up to 5000 psi, meet the requirements of Hydraulic Tool Manufacturer's Association (HTMA - ISO 16028) standards in the 3/8" size, and connect with FF Series Couplers.
Parker's FF Series are double shut, off non-spill quick couplings designed to minimize spillage and air inclusion when connecting or disconnecting. FC nipples are designed to connect under pressure, in situations where fluid lines contain residual pressure caused by thermal expansion. FF Couplers and nipples are available in a range of sizes to be versatile for use in applications with pressures up to 5000 psi.

Technical Characteristics:
• FF Sizes: 1/4” – 1”
• FC (Connect Under Pressure) Sizes: 3/8", 1/2" & 3/4"
• Material: Steel
• Port Ends: Female NPSF, Female NPTF, Female BSPP, Female UNF
• Seal Options: Nitrile/Polyurethane, EPR, Fluorocarbon

Markets:
• Industrial
• Construction
• Utility
• Agriculture

Features/Benefits:
• 3/8" size is globally interchangeable with other couplings complying with HTMA (ISO 16028) standards
• Non-spill flush face valves minimize fluid loss when disconnecting, to reduce environmental contamination and avoid safety hazards caused by spillage.
• Flush face valves minimize the amount of air that can enter the system when connecting fluid lines, thus preventing accelerated wear of the system's components.

Applications:
• Hydraulic tools
• Construction equipment attachments
• Industrial hydraulic lines
• Agricultural implements
• Coolant fill and drain lines

FET Series Nipples (hydraulic) up to 6000 psi connect with FET Series Couplers and are interchangeable with similar thread to connect couplings by other manufacturers. Port options include Code 62 flange head and pad.

Parker's FET Series are high pressure (6000 psi) non-spill couplings. The coupler sleeve and nipple body must be manually threaded together to make the connection. These rugged couplings are built with high strength materials and are impulse resistant.

The coupler and nipple have stainless steel non-spill valves and can be connected under residual pressure up to 5000 psi and disconnected under residual pressure up to 2500 psi. When the external red O-ring is fully covered by the sleeve, it visually indicates that a complete connection has been made.

Technical Characteristics:
• Sizes: 3/8” to 2"
• Material: Steel with FNC coating for extended durability, stainless steel valve (2" has steel valve)
• Port Ends: Female NPTF, Female ORB, Code 62 flange head and pad
• Seal: Nitrile, polyurethane

Markets:
• Oil and Gas
• Construction
• Mining

Features/Benefits:
• Interchangeable with similar thread to connect couplings by other manufacturers
• Sizes 3/8" - 1/1/2" have stainless steel valves, 2" valve is steel
• When the external red color O-ring is fully covered by the sleeve, it provides visual indication that a complete connection has been made.
• Connect and disconnect under residual pressure
• High strength materials are impulse resistant for demanding applications

Applications:
• On-shore drilling and oil field equipment
• High impulse mobile circuits
• Excavator attachments
• Tunnel boring

FET Series Couplers (hydraulic) up to 6000 psi connect with FET Series Nipples and are interchangeable with similar thread to connect couplings by other manufacturers. Port options include Code 62 flange head and pad.

Parker's FET Series are high pressure (6000 psi) non-spill couplings. The coupler sleeve and nipple body must be manually threaded together to make the connection. These rugged couplings are built with high strength materials and are impulse resistant.

The coupler and nipple have stainless steel non-spill valves and can be connected under residual pressure up to 5000 psi and disconnected under residual pressure up to 2500 psi. When the external red O-ring is fully covered by the sleeve, it visually indicates that a complete connection has been made.

Technical Characteristics:
• Sizes: 3/8” to 2"
• Material: Steel with FNC coating for extended durability, stainless steel valve (2" has steel valve)
• Port Ends: Female NPTF, Female ORB, Code 62 flange head and pad
• Seal: Nitrile, polyurethane

Markets:
• Oil and Gas
• Construction
• Mining

Features/Benefits:
• Interchangeable with similar thread to connect couplings by other manufacturers
• Sizes 3/8" - 1/1/2" have stainless steel valves, 2" valve is steel
• When the external red color O-ring is fully covered by the sleeve, it provides visual indication that a complete connection has been made.
• Connect and disconnect under residual pressure
• High strength materials are impulse resistant for demanding applications

Applications:
• On-shore drilling and oil field equipment
• High impulse mobile circuits
• Excavator attachments
• Tunnel boring

Parker's Flat Face Quick Coupling Series FF is a dry break coupling system with Parker own profile. During disconnection there is no oil loss, and during connection there is no inclusion of air into the system. This coupling system is also available with pressure eliminator, i.e. connection is possible under static/residual pressure up to working pressure. An additional safety locking ring prevents unintentional disconnection. Series FF is develop for single-hand operation.

Markets:
- Agriculture
- Automotive
- Oil & Gas
- Process
- Power Generation
- Transportation
- Vocational & Municipal
- Defense
- Industrial
- Machine Tooling
- Material Handling
- Construction

Features/Benefits:
- Dry break quick coupling, no oil loss during disconnection and only minimum pressure drop
- Single-handed operation for easy and fast connection
- Safety locking ring to prevent unintentional disconnection
- Twice as safe through double sealing in the plug
- Also available with pressure eliminator

Applications:
Easy dry break connection / disconnection in hydraulic systems, both mobild and industrial applications
- Tractors
- Trucks
- Wheel loaders
- Military vehicles
- Hydraulic tools
- High pressure hydraulic tools
- Presses
- Molding machines

Szybkozłącza Parker z płaską powierzchnią czołową serii FEM/IF są produkowane zgodnie z normą ISO 16028 i są kompatybilne z innymi seriami zgodnymi z tą samą normą. Złącza te umożliwiają bezwyciekowe rozłączanie przy minimalnych stratach oleju podczas odłączania. Dzięki konstrukcji zaworu złącze ma minimalny spadek ciśnienia, a tym samym osiąga maksymalną opłacalność. Standardowa wersja serii FEM/IF jest dostępna w wykonaniu ze stali lub stali nierdzewnej.

Rynki:
– Rolnictwo
– Motoryzacja
– Przemysł naftowy i gazowy
– Przetwarzanie
– Wytwarzanie energii elektrycznej
– Transport
– Kształcenie zawodowe i usługi komunalne
– Przemysł obronny
– Przemysł
– Obrabiarki
– Transport materiałów
– Budownictwo

Cechy/zalety:
– Funkcja blokady bezpieczeństwa w standardzie zapobiegająca niezamierzonemu rozłączeniu
– FEC z eliminatorem ciśnienia umożliwia bezproblemowe podłączenie pod ciśnieniem statycznym (do maks. znamionowego ciśnienia roboczego)
– FEMP i FECP z funkcjami push/pull nadają się do wielu płyt lub gdy złącze jest przeznaczone do danego zastosowania

Zastosowania:
Łatwe podłączanie i odłączanie na sucho w układach hydraulicznych, zarówno w zastosowaniach mobilnych, jak i przemysłowych
– Ciągniki
– Ciężarówki
– Ładowarki kołowe
– Pojazdy wojskowe
– Narzędzia hydrauliczne
– Prasy
– Wtryskarki

Szybkozłącza z serii NSR firmy Parker to szybkozłącza sucho odcinające z zaworem z płaską powierzchnią czołową. Seria NSR wyróżnia się minimalnym spadkiem ciśnienia.
Seria NSR jest certyfikowana zgodnie z normą prób odporności na udary i wibracje DIN EN 61373:1999 (zastosowania kolejowe, tabor), a także DIN EN 60068-2-64 (wibracje przypadkowe szerokopasmowe) i DIN EN 60068-2-27 (udary).

Rynki:
– Transport

Cechy i zalety:
– Zawór grzybkowy sucho odcinający zmniejszający wycieki podczas podłączania/odłączania.
– Po podłączeniu zewnętrzna uszczelka zapobiega przedostawaniu się zanieczyszczeń (pył hamulcowy, sól drogowa, woda).
– Konstrukcja ze stali nierdzewnej hartowanej.

Zastosowania:
– Hydrauliczne układy hamulcowe

Wytrzymałe złącza typu Screw-to-Connect są przeznaczone do wymagających zastosowań z zaworami o płaskiej powierzchni, co pozwala uniknąć wycieków i chronić środowisko. Najlepsze w swojej klasie wartości przepływu i rozerwania, zintegrowana funkcja obrotu. Szybsze podłączanie dzięki podwójnemu gwintowi ACME na początku; na życzenie dostępne z eliminatorem ciśnienia we wtyku.

Ciśnienie robocze:
3/8 cala — do 550 barów
1/2 cala — do 500 barów
3/4 cala — do 500 barów
1 cal — do 420 barów

Temperatura robocza:
od -30°C do +100°C (NBR), w zależności od czynnika.
Na życzenie dostępne są uszczelnienia specjalne.

Rynki/zastosowania:
Sprzęt mobilny i budowlany:
Żurawie, maszyny wiertnicze, koparki

Cechy/zalety szybkozłączy SCFF firmy Parker:
• Dobra odporność na drgania i naprężenia mechaniczne
• Brak utraty płynu podczas podłączania i odłączania
• Skuteczność i bezpieczeństwo
• Szybkie i łatwe podłączanie
• System blokowania zapobiega przypadkowemu rozłączeniu
• Możliwość podłączenia do pełnego ciśnienia roboczego z użyciem eliminatora ciśnienia