Wysokociśnieniowe złącza hydrauliczne

HP Series Nipples (hydraulic) 5000 psi connect with HP Series Couplers.
Parker's HP Series are double shut-off quick couplings with manual sleeves and poppet valves. Steel coupler sleeves and nipple bodies are heat treated to withstand pressure surges. End fitting configurations include female pipe and straight thread ORB.

Technical Characteristics:
• Sizes: 1” and 1-1/2””
• Material: Steel
• Port Ends: Female NPSF, Female ORB, Female NPTF
• Seal Options: Nitrile, EPR, Fluorocarbon, Neoprene

Markets:  
• Industrial
• Construction
• Mobile Equipment

Features/Benefits:  
• Steel coupler sleeves and nipple bodies are heat treated to withstand pressure surges
• High flow with minimal pressure drop

Applications:  
• Industrial hydraulic lines
• Construction mobile equipment

HP Series Couplers (hydraulic) 5000 psi connect with HP Series Nipples.
Parker's HP Series are double shut-off quick couplings with manual sleeves and poppet valves. Steel coupler sleeves and nipple bodies are heat treated to withstand pressure surges. End fitting configurations include female pipe and straight thread ORB.

Technical Characteristics:
• Sizes: 1” and 1-1/2””
• Material: Steel
• Port Ends: Female NPSF, Female ORB, Female NPTF
• Seal Options: Nitrile, EPR, Fluorocarbon, Neoprene

Markets:  
• Industrial
• Construction
• Mobile Equipment

Features/Benefits:  
• Steel coupler sleeves and nipple bodies are heat treated to withstand pressure surges
• High flow with minimal pressure drop

Applications:  
• Industrial hydraulic lines
• Construction mobile equipment

Snap-tite H Series Couplers (hydraulic, fluids) up to 11,000 psi connect with Snap-tite H and PH Series Nipples. These original Snap-tite H Series quick disconnects are truely multi-purpose. With sizes up to 4”, this coupling can be valved on both sides, single shut-off, or full flow. Both male and female port ends as well as many material options and the widest range of sizes available, make the Snap-tite H Series an ideal quick connection for a variety of applications.

Double  or single shut off - Couplers and nipples are compatible to connect with or without valves, in any combination.

Full flow option - Rated for pressure ranges up to 11,000 psi max when used as a straight through, unvalved connection where both coupler and nipple are plain or without valves.

Connect under pressure option - PH Series couplers allow connection with H Series valved nipples when there is residual pressure on the PH Coupler side. It is recommended that only one half of the connection (coupler or nipple) be a PH Series, not both.

Technical Characteristics:  
• Sizes: 1/4” – 4”
• Materials: Steel, Aluminum, Brass, 316 Stainless Steel
• Port Ends: Male NPT, Female NPTF, Female SAE, Male SAE 37 degree Flare
• Seal Options: Nitrile, Fluorocarbon, Ethylene Propylene

Markets:
• Industrial
• Construction
• Oil and Gas
• Agriculture

Features/Benefits:
• Original Snap-tite H Series multi-purpose coupling, widely used in varied applications
• Widest range of sizes up to 4"
• Couplers and nipples are compatible to connect with or without valves, in any combination
• PH Series connect under pressure version allows connection of lines with residual pressure caused by thermal expansion
• Male port end options add versatility
• Optional sleeve lock helps to prevent accidental disconnection

Applications:  
• Industrial hydraulic lines
• Food and chemical processing
• Water and coolant lines
• High pressure fluid transfer
• Mobile equipment
• Cleaning equipment

Snap-tite H  Series Nipples (hydraulic, fluids) up to 11,000 psi connect with Snap-tite H and PH Series Couplers. These original Snap-tite H Series quick disconnects are truely multi-purpose. With sizes up to 4”, this coupling can be valved on both sides, single shut-off, or full flow. Both male and female port ends as well as many material options and the widest range of sizes available, make the Snap-tite H Series an ideal quick connection for a variety of applications.

Double  or single shut off - Couplers and nipples are compatible to connect with or without valves, in any combination.

Full flow option - Rated for pressure ranges up to 11,000 psi max when used as a straight through, unvalved connection where both coupler and nipple are plain or without valves.

Connect under pressure option - PH Series nipples allow connection with H Series valved couplers when there is residual pressure on the PH Nipple side. It is recommended that only one half of the connection (coupler or nipple) be a PH version, not both.

Technical Characteristics:  
• Sizes: 1/4” – 4”
• Materials: Steel, Aluminum, Brass, 316 Stainless Steel
• Port Ends: Male NPT, Female NPTF, Female SAE, Male SAE 37 degree Flare
• Seal Options: Nitrile, Fluorocarbon, Ethylene Propylene

Markets:
• Industrial
• Construction
• Oil and Gas
• Agriculture

Features/Benefits:
• Original Snap-tite H Series multi-purpose coupling, widely used in varied applications
• Widest range of sizes up to 4"
• Couplers and nipples are compatible to connect with or without valves, in any combination
• PH Series Nipples provide a connect under pressure option to connect lines with residual pressure caused by thermal expansion
• Male port end options add versatility

Applications:  
• Industrial hydraulic lines
• Food and chemical processing
• Water and coolant lines
• High pressure fluid transfer
• Mobile equipment
• Cleaning equipment

1141 Series Couplers (hydraulic) 10,000 psi, connect with 1141 Series Nipples.
Parker's 1141 Series have stainless steel bodies and brass sleeves. They are high pressure, thread to connect quick couplings with polyethylene seals that resist extrusion and abrasion.  Couplers and nipples are available in 1/4"" size and have dust caps and plugs included.

Technical Characteristics:
• Size: 1/4”
• Material: 303 Stainless Steel
• Port Ends: Female NPTF
• Seal Material: Polyurethane

Markets:
• Oil and Gas

Features/Benefits:
• Rated pressure up to 10,000 psi and 17,000 psi intermittent pressure
• Small diameter mating seal keeps separation forces to a minimum, allowing easier threaded connection and disconnection at pressures up to 5000 psi
• Polyurethane seals resist extrusion and abrasion
• Threaded connection guards against accidental disconnection
• When fully coupled, sleeve covers the mating thread to visually confirm a complete connection
• Attached protective caps are included

Applications:  
• Off shore oil equipment
• Pilot lines
• Test port access
• Hydraulic lines in corrosive environments

1141 Series Nipples (hydraulic) 10,000 psi, connect with 1141 Series Couplers.
Parker's 1141 Series have stainless steel bodies and brass sleeves. They are high pressure, thread to connect quick couplings with polyethylene seals that resist extrusion and abrasion. Couplers and nipples are available in 1/4"" size and have dust caps and plugs included.

Technical Characteristics:
• Size: 1/4”
• Material: 303 Stainless Steel
• Port Ends: Female NPTF
• Seal Material: Polyurethane

Markets:
• Oil and Gas

Features/Benefits:
• Rated pressure up to 10,000 psi and 17,000 psi intermittent pressure
• Small diameter mating seal keeps separation forces to a minimum, allowing easier threaded connection and disconnection at pressures up to 5000 psi
• Polyurethane seals resist extrusion and abrasion
• Threaded connection guards against accidental disconnection
• When fully coupled, sleeve covers the mating thread to visually confirm a complete connection
• Attached protective caps are included

Applications:  
• Off shore oil equipment
• Pilot lines
• Test port access
• Hydraulic lines in corrosive environments

HO Series Couplers (hydraulic) up to 15,000 psi connect with HO Series Nipples.
Parker's HO Series are high pressure, steel, high flow quick couplings with manual sleeves. Couplers and nipples are unvalved, resulting in straight through, unrestricted flow. Electroless nickel plating provides corrosion resistance and sleeve lock guards against accidental disconnection.

Technical Characteristics:
• Sizes: 1/4”, 3/8", 1/2”
• Material: Steel with electroless nickel plating
• Port Ends: Female NPTF
• Seal Options: Nitrile, EPR, Fluorocarbon, Neoprene

Markets:  
• Pulp and paper
• Oil and gas
• Testing

Features/Benefits:
• Sleeve lock guards against accidental disconnection
• Straight through, unvalved design provides full flow with minimal pressure drop
• Electroless nickel plating adds corrosion resistance

Applications:  
• Paper and pulp processing
• Refinery systems
• Testing systems

HO Series Nipples (hydraulic) up to 15,000 psi connect with HO Series Couplers.
Parker's HO Series are high pressure, steel, high flow quick couplings with manual sleeves. Couplers and nipples are unvalved, resulting in straight through, unrestricted flow. Electroless nickel plating provides corrosion resistance and sleeve lock guards against accidental disconnection.

Technical Characteristics:
• Sizes: 1/4”, 3/8"", 1/2”
• Material: Steel with electroless nickel plating
• Port Ends: Female NPTF
• Seal Options: Nitrile, EPR, Fluorocarbon, Neoprene

Markets:  
• Pulp and paper
• Oil and gas
• Testing

Features/Benefits:
• Sleeve lock guards against accidental disconnection
• Straight through, unvalved design provides full flow with minimal pressure drop
• Electroless nickel plating adds corrosion resistance

Applications:  
• Paper and pulp processing
• Refinery systems
• Testing systems

3000 Series Couplers (hydraulic) 10,000 psi, connect with 3000 Series Nipples.
These rugged thread to connect, high pressure quick couplings are manually threaded together to open the ball valves and make the connection. The durable coupler interface seal is polyurethane.

Technical Characteristics:
• Sizes: 1/4” & 3/8”
• Material: Steel
• Port Ends: Female NPTF, Male NPTF
• Seal: Polyurethane

Markets:
• Rescue Equipment
• Construction

Features/Benefits:
• Rugged and secure threaded connection interchanges with similar hand tool couplings
• Hard chrome alloy ball valves
• Polyurethane seal resists against high pressure extrusion
• Positive valve stop prevents flow checking for a smooth performance

Applications:
• High pressure rescue tools  
• Hydraulic rams
• Portable hydraulic hand tools
• Crimping equipment

H Series Couplers (hydraulic) 10,000 psi, meet the requirements of Hydraulic Tool Manufacturer's Association (HTMA) standards, and connect only with FH Series Nipples. Parker's FH Series are high pressure non-spill quick couplings that will not connect with lower pressure quick couplings. The red color makes these couplings easy to identify as high pressure (10,000 psi). The coupler sleeve lock feature guards against accidental disconnection. Couplers and nipples are available in 3/8" size only.

Technical Characteristics:
• Size: 3/8"
• Material: Steel
• Port Ends: Female NPTF, Female BSPP
• Seal Options: Nitrile, EPR, Fluorocarbon

Markets:
• Rescue
• Industrial
• Construction
• Utility

Features/Benefits:
• Push-to-connect operation makes connection easy with one hand
• Meets HTMA (ISO 16028) standards but will NOT connect with lower pressure flush face couplings
• Red color finish makes it easy to visually identify as a high pressure connection
• Non-spill flush face valves minimize fluid loss when disconnecting, to reduce environmental contamination and avoid safety hazards caused by spillage.
• Flush face valves minimize the amount of air that can enter the system when connecting fluid lines, thus preventing accelerated wear of the system's components.
• Sleeve lock guards against accidental disconnection

Applications:  
• Hydraulic crimpers, cutters, benders, clamps, wedges
• Rescue equipment
• High pressure test equipment
• High pressure hydraulic equipment

FH Series Nipples (hydraulic) 10,000 psi, meet the requirements of Hydraulic Tool Manufacturer's Association (HTMA) standards, and connect only with FH Series Couplers.
Parker's FH Series are high pressure non-spill quick couplings that will not connect with lower pressure quick couplings. The red color makes these couplings easy to identify as high pressure (10,000 psi). Couplers and nipples are available in 3/8" size only.

Technical Characteristics:
• Size: 3/8"
• Material: Steel
• Port Ends: Female NPTF, Female BSPP
• Seal Options: Anti blow-out Nitrile/PTFE bonded seal, EPR, Fluorocarbon

Markets:
• Rescue
• Industrial
• Construction
• Utility

Features/Benefits:
• Push-to-connect operation makes connection easy with one hand
• Meets HTMA (ISO 16028) standards but will NOT connect with lower pressure flush face couplings
• Red color finish makes it easy to visually identify as a high pressure connection
• Non-spill flush face valves minimize fluid loss when disconnecting, to reduce environmental contamination and avoid safety hazards caused by spillage.
• Flush face valves minimize the amount of air that can enter the system when connecting fluid lines, thus preventing accelerated wear of the system's components.
• Sleeve lock guards against accidental disconnection

Applications:  
• Hydraulic crimpers, cutters, benders, clamps, wedges
• Rescue equipment
• High pressure test equipment
• High pressure hydraulic equipment

TC Series Couplers (hydraulic) up to 10,000 psi connect with TC Series Nipples.
Parker's TC Series are double shut-off, high pressure quick couplings designed for applications with hydraulic and mechanical shock. Couplers have a sleeve lock function to guard against accidental disconnection. Couplers and nipples are available in 3/8" size with a pressure rating of 10,000 psi.

Technical Characteristics:
• Size: 3/8”
• Material: Steel
• Port Ends: Female NPSF
• Seal: Fluorocarbon

Markets:  
• Railway
• Construction
• Building relocation
• Structure lifting

Features/Benefits:
• Sleeve lock guards against accidental disconnection
• Positive valve stop prevents flow checking for reliable performance under hydraulic shock
• Durable Fluorocarbon seals

Applications:  
• Any application with hydraulic and mechanical shock
• Hydraulic jacking and house moving equipment
• Construction equipment
• Railway maintenance

TC Series Nipples (hydraulic) up to 10,000 psi connect with TC Series Couplers.
Parker's TC Series are double shut-off, high pressure quick couplings designed for applications with hydraulic and mechanical shock. Couplers have a sleeve lock function to guard against accidental disconnection. Couplers and nipples are available in 3/8"" size with a pressure rating of 10,000 psi.

Technical Characteristics:
• Size: 3/8”
• Material: Steel
• Port Ends: Female NPSF
• Seal: Fluorocarbon

Markets:  
• Railway
• Construction
• Building relocation
• Structure lifting

Features/Benefits:
• Sleeve lock guards against accidental disconnection
• Positive valve stop prevents flow checking for reliable performance under hydraulic shock
• Durable Fluorocarbon seals

Applications:  
• Any application with hydraulic and mechanical shock
• Hydraulic jacking and house moving equipment
• Construction equipment
• Railway maintenance

3000 Series Nipples (hydraulic) 10,000 psi, connect with 3000 Series Couplers. These rugged thread to connect, high pressure quick couplings are manually threaded together to open the ball valves and make the connection. The durable coupler interface seal is polyurethane.

Technical Characteristics:
• Sizes: 1/4” & 3/8”
• Material: Steel
• Port Ends: Female NPTF, Male NPTF
• Seal: Polyurethane

Markets:
• Rescue Equipment
• Construction

Features/Benefits:
• Rugged and secure threaded connection interchanges with similar hand tool couplings
• Hard chrome alloy ball valves
• Polyurethane seal resists against high pressure extrusion
• Positive valve stop prevents flow checking for a smooth performance

Applications:
• High pressure rescue tools  
• Hydraulic rams
• Portable hydraulic hand tools
• Crimping equipment

Snap-tite 75 Series Nipples (hydraulic) up to 5,000 psi connect with Snap-tite 75 Series Couplers.
Parker's Snap-tite 75 Series are double shut-off, connect under pressure, thread-to-connect quick couplings. The 3/4" size has a hex nut sleeve. All other sizes have a wing nut style connection. Couplers and nipples  are available in a wide range of sizes and steel or stainless steel materials.

API 16D BOP version is available in 3/4" to 2" sizes. Contact Parker's Quick Coupling Division for availability.

Technical Characteristics:
• Sizes: 3/4” – 4”
• Materials: Steel plated, 316 Stainless Steel
• Port Ends: Female Pipe NPTF for Steel, NPT for 316 Stainless Steel
• Seal Options: Nitrile, Fluorocarbon
• Other Nipple options include: "Fire Safe" BOP version 3/4" - 2" steel sizes only

Markets:
• Oil and gas
• Construction

Features/Benefits:
• Thread to connect wing nut makes a secure connection in rugged conditions
• Connect fluid lines under residual pressure
• Steel or corrosion resistant 316 stainless steel construction
• API 16D option for BOP use

Applications:  
• High pressure hydraulic systems
• Oil fields and offshore drilling rigs
• Cranes
• Power tongs
• Horizontal boring
• Dewatering

Snap-tite 71 Series Couplers (hydraulic) up to 10,000 psi connect with Snap-tite 71 Series Nipples.
These are double shut-off, non-spill, push to connect quick couplings for high pressure applications. Couplers and nipples  are available in a wide range of sizes up to 2 inch with material options including steel, 316 stainless steel, or high pressure stainless steel.

Note: The 71-3 style couplers and nipples are interchangeable with the previous Snap-tite design couplers and nipples in sizes 3/8", 1/2", and 3/4". Old style 1" couplers and nipples (71-2C16 and 71-2N16) are not interchangeable with the 71-3 design.

Technical Characteristics:
• Sizes: 1/4” – 2”
• Materials: Steel, 316 Stainless Steel, High Pressure Stainless Steel
• Port Ends: Female NPTF, Female SAE
• Seal Options: Nitrile, Fluorocarbon, Ethylene Propylene
• Other Coupler options include: Sleeve Lock

Markets:
• Industrial
• Oil and Gas
• Construction

Features/Benefits:
• Push-to-connect operation makes connection easy
• Corrosion resistant 316 stainless steel and high pressure stainless steel material options for demanding applications
• Non-spill valves minimize fluid loss when disconnecting to reduce environmental contamination and avoid safety hazards caused by spillage.
• Flush face valves minimize the amount of air that can enter the system when connecting fluid lines

Applications:  
• In-plant equipment
• Oil exploration and production
• Construction Equipment

Snap-tite 71 Series Nipples (hydraulic) up to 10,000 psi connect with Snap-tite 71 Series Couplers.
These are double shut-off, non-spill, push to connect quick couplings for high pressure applications. Couplers and nipples  are available in a wide range of sizes up to 2 inch with material options including steel, 316 stainless steel, or high pressure stainless steel.

Note: The 71-3 style couplers and nipples are interchangeable with the previous Snap-tite design couplers and nipples in sizes 3/8", 1/2", and 3/4". Old style 1" couplers and nipples (71-2C16 and 71-2N16) are not interchangeable with the 71-3 design.

Technical Characteristics:
• Sizes: 1/4” – 2”
• Materials: Steel, 316 Stainless Steel, High Pressure Stainless Steel
• Port Ends: Female NPTF, Female SAE
• Seal Options: Nitrile, Fluorocarbon, Ethylene Propylene

Markets:
• Industrial
• Oil and Gas
• Construction

Features/Benefits:
• Push-to-connect operation makes connection easy
• Corrosion resistant 316 stainless steel and high pressure stainless steel material options for demanding applications
• Non-spill valves minimize fluid loss when disconnecting to reduce environmental contamination and avoid safety hazards caused by spillage.
• Flush face valves minimize the amount of air that can enter the system when connecting fluid lines

Applications:  
• In-plant equipment
• Oil exploration and production
• Construction Equipment

Snap-tite 75 Series Couplers (hydraulic) up to 5,000 psi connect with Snap-tite 75 Series Nipples.
Parker's Snap-tite 75 Series are double shut-off, connect under pressure, thread-to-connect quick couplings. The 3/4" size has a hex nut sleeve. All other sizes have a wing nut style connection. Couplers and nipples  are available in a wide range of sizes and steel or stainless steel materials.

API 16D BOP version is available in 3/4" to 2" sizes. Contact Parker's Quick Coupling Division for availability.

Technical Characteristics:
• Sizes: 3/4” – 4”
• Materials: Steel plated, 316 Stainless Steel
• Port Ends: Female Pipe NPTF for Steel, NPT for 316 Stainless Steel
• Seal Options: Nitrile, Fluorocarbon
• Other Coupler options include: "Fire Safe" BOP version 3/4" - 2" steel sizes only

Markets:
• Oil and gas
• Construction

Features/Benefits:
• Thread to connect wing nut makes a secure connection in rugged conditions
• Connect fluid lines under residual pressure
• Steel or corrosion resistant 316 stainless steel construction
• API 16D option for BOP use

Applications:  
• High pressure hydraulic systems
• Oil fields and offshore drilling rigs
• Cranes
• Power tongs
• Horizontal boring
• Dewatering

Szybkozłącza wysokociśnieniowe serii HP firmy Parker zostały specjalnie opracowane pod kątem stosowania w maszynach przemysłowych, sprzęcie do prób, sprzęcie ratowniczym, urządzeniach do napinania śrub, kluczach dynamometrycznych itp.
Złącza HP1000 i HP1500 mogą być dostarczane z dodatkową blokadą bezpieczeństwa albo bez niej. Seria HP to system szybkozłączy sucho odcinających, które umożliwiają uniknięcie strat oleju podczas rozłączania i przedostawania się powietrza podczas łączenia.

Rynki:
– Ratownictwo
– Przemysł

Cechy/zalety:
– Wysokie natężenie przepływu dzięki zoptymalizowanej konstrukcji zaworu
– Suche odcinanie — bez strat oleju podczas rozłączania i bez przedostawania się powietrza podczas łączenia
– Po rozłączeniu korek wytrzymuje ciśnienie statyczne sięgające maksymalnego ciśnienia roboczego
– Wysokociśnieniowe złącza Parker Tema są dostarczane z zaślepkami przeciwpyłowymi

Zastosowania:
– Narzędzia wysokociśnieniowe
– Sprzęt ratowniczy
– Klucze dynamometryczne
– Wysokociśnieniowe pompy hydrauliczne
– Urządzenia do napinania śrub

Parker's High Pressure Screw-to-Connect Quick Coupling Series SK were specially developed for off-shore applications. Series SK is made of stainless steel for high working pressure in corrosive environment.

Markets:
- Oil & Gas

Freatures/Benefits:
- Corrosion resistant due to the stainless steel construction
- No leckage due to the double-shut-off valve
- Screw-to-connect - connectable under pressure
- Dust caps available for coupling and plug

Application Area:
- Hydraulic tools in marine- & offshore applications

Parker’s C Series Quick Coupling Adapters provide non-drip valving for clean, safe, trouble-free performance and minimal air inclusion. Protective dust caps are included to prevent damage and fluid contamination. These quick coupling adapters are available in a variety of thread styles (NPT, BSP and "High Pressure") with working pressures ranging from 14,500 psi to 29,000 psi. Applications include hydraulic tools and rescue equipment, hydrostatic testing and Blow-out Preventers.

Markets:
• High pressure hydraulics
• Oil & Gas

Features / Benefits:
• Adapters offer ease of connection to high pressure hoses and fixed ports
• Built-in safety locking device to prevent accidental disconnect
• Protective dust caps are included to prevent damage and fluid contamination in disconnected position
• Rugged design and construction for long life in demanding applications

Applications:
• Hydraulic tools and rescue equipment
• Hydrostatic testing
• Blow-out Preventers

Rogan series quick couplings are versatile connecting devices that permit easy and rapid joining of hose assemblies to your system. Couplings are available with multiple connection styles, including Type "M", high pressure, medium pressure and NPT connections. Working pressures range from 15,000 psi to 30,000 psi.

Markets:
• Waterblast
• Hydraulics

Features / Benefits:
• Working pressures from 15,000 psi to 30,000 psi
• Couplings with check-valves can withstand the full working pressure in the disconnected condition
• Each coupling is assembled and pressure tested to at least 5,000 psi above its maximum rated working pressure

Applications:
• For hydraulic systems and waterblast applications ranging from 15,000 to 30,000 psi