Węże specjalne
Parker offers the widest range of low, medium and high pressure specialty hydraulic, pneumatic,
industrial and hybrid hoses in the industry. They are resistant to heat, fire, ozone, weather, chemicals, oil,
flames, UV and abrasion
industrial and hybrid hoses in the industry. They are resistant to heat, fire, ozone, weather, chemicals, oil,
flames, UV and abrasion
-
SIAMEEZ® Grade T Twin Line Welding Hose, Series 7109
Parker's Series 7109 Siameez Grade T Twin Line Welding Hose provides excellent service across a wide variety of industrial and commercial applications. The chemically bonded dual hoses provide easier hose management and handling than independent single lines. The color coding allows easy identification for quick and accurate installation, and the cover resists abrasion and weathering to provide maximum performance. Series 7109 is a versatile hose for many common industrial welding applications.
Markets:
• Construction
• General Industrial
• Oil & Gas
Features/Benefits:
• Tube: Black chloroprene for flame and oil resistance, and compatibility with multiple fuel gases.
• Tube: Non-blooming to minimize the migration of combustible plasticizers and waxes to the surface of the hoses.
• Reinforcement: Multiple textile plies for strength and kink resistance.
• Cover: Chloroprene for abrasion, flame, oil and weathering resistance.
• Cover Colors: Green (oxygen) and red (fuel gas)
Applications:
- media
• Industrial oxygen
• Welding fuel gas (including acetylene)
- usage
• Bending
• Brazing
• Cutting
• Fabricating
• Gouging
• Joining
• Piercing
• Preheating
• Post-heating
• Severing
• Soldering
• Straightening
• Surfacing
• Trimming
• Auto body shops
• Craft shops
• Garages
• Mines
• Oilfield
• Plumber shops
• Railyards
• Salvage
• Scrapyards
• Shipyards
• Steel mills
Industry Standards:
• ARPM IP-7
• CGA E-1
Safety/Technical:
• Design Factor: 4:1
Warnings:
• Do not attempt to re-couple, repair or splice hose assemblies; replace all assemblies that show signs of abrading, abuse, age, damage or fatigue. Refer to ARPM IP-7, Specifications for Rubber Welding Hose and Hose Technical Bulletin 11-5, Guide for Use, Maintenance and Inspection of Welding Hose. Refer to CGA Safety Bulletin SB-11, Use of Rubber Welding Hose. -
SIAMEEZ® Grade R Twin Line Welding Hose, Series 7126
Parker's Series 7126 Siameez Grade R Twin Line Welding Hose provides excellent service across a wide variety of industrial and commercial applications. The chemically bonded dual hoses provide easier hose management and handling than independent single lines. The cover resists abrasion and weathering to provide maximum performance. Series 7126 is a versatile hose for many common acetylene-based industrial welding applications.
Markets:
• Construction
• General Industrial
• Oil & Gas
Features/Benefits:
• Tube: Black EPDM for acetylene/oxygen compatibility.
• Tube: Non-blooming to minimize the migration of combustible plasticizers and waxes to the surface of the hoses.
• Reinforcement: Multiple textile plies for strength and kink resistance.
• Cover: EPDM for abrasion and weathering resistance.
• Cover Colors: Green (oxygen) and red (fuel gas, acetylene only)
Applications:
- media
• Fuel gas (acetylene only)
• Oxygen
- usage
• Bending
• Brazing
• Cutting
• Fabricating
• Gouging
• Joining
• Piercing
• Preheating
• Post-heating
• Severing
• Soldering
• Straightening
• Surfacing
• Trimming
- setting
• Auto body shops
• Craft shops
• Garages
• Mines
• Oilfield
• Plumber shops
• Railyards
• Salvage
• Scrapyards
• Shipyards
• Steel mills
Industry Standards:
• ARPM IP-7
Safety/Technical:
• Design Factor: 4:1
• Do not use with any fuel gas other than acetylene.
Warnings:
• Do not attempt to re-couple, repair or splice hose assemblies; replace all assemblies that show signs of abrading, abuse, age, damage or fatigue. Refer to ARPM IP-7, Specifications for Rubber Welding Hose and Hose Technical Bulletin 11-5, Guide for Use, Maintenance and Inspection of Welding Hose. Refer to CGA Safety Bulletin SB-11, Use of Rubber Welding Hose. -
Large Diameter Heavy Duty Custom Made Water Discharge Hose,...
Parker's Series ES104 Large Diameter Heavy Duty Custom Made Water Discharge Hose provides excellent medium pressure, heavy duty service across multiple applications. The thick wall provides excellent durability and maximum performance. The basic hose construction may be modified to customer-specified requirements, including brand, length pattern and built-in coupling configurations. Parker will quickly design and build a custom made product to satisfy specific application requirements and will drop-ship in protective packaging, eliminating the cost of additional handling and the need to compromise on hose performance.
Markets:
• Agriculture
• Construction
• General Industrial
Features/Benefits:
• Tube: Black SBR for economical service to 180°F.
• Reinforcement: Multiple textile plies for strength and durability.
• Cover: Black SBR for resistance to abrasion, cuts, gouging, scuffs and weathering resistance.
• Couplings: Per customer requirements
Applications:
- media
• Slurries
• Water
- usage
• Irrigation
• Surface mining
Safety/Technical:
Custom Made Hose Engineering Hot Lines
- Eastern USA
1-800-438-2004
7:00 am—4:30 pm ET
- Western USA
1-800-783-3922
10:00 am—7:00 pm ET -
Large Diameter Lightweight Custom Made Water Discharge Hose,...
Parker's Series ES115 Large Diameter Lightweight Custom Made Water Discharge Hose provides excellent low pressure, light duty service across multiple applications. The medium wall thickness provides excellent flexibility and is easy to handle. The basic hose construction may be modified to customer-specified requirements, including brand and length pattern. Parker will quickly design and build a custom made product to satisfy specific application requirements and will drop-ship in protective packaging, eliminating the cost of additional handling and the need to compromise on hose performance.
Markets:
• Agriculture
• Construction
• General Industrial
Features/Benefits:
• Tube: Black SBR for economical service to 180°F.
• Reinforcement: Multiple textile plies for strength and durability.
• Cover: Black SBR for resistance to abrasion, cuts, gouging, scuffs and weathering resistance.
Applications:
- media
• Slurries
• Water
- usage
• Irrigation
• Surface mining
Safety/Technical:
• Design Factor: 3:1 -
Large Diameter Lightweight Custom Made Water Suction Hose,...
Parker's Series EW300 Large Diameter Lightweight Custom Made Water Suction Hose provides excellent low pressure, light duty service across multiple applications. The wire helix provides full suction capability and flexibility, making the hose easy to handle. The basic hose construction may be modified to customer-specified requirements, including brand and length pattern. Parker will quickly design and build a custom made product to satisfy specific application requirements and will drop-ship in protective packaging, eliminating the cost of additional handling and the need to compromise on hose performance.
Markets:
• Agriculture
• Construction
• General Industrial
Features/Benefits:
• Tube: Black SBR for economical service to 180°F.
• Reinforcement: Multiple textile plies for strength and durability, and a wire helix for full suction capability and a path to conduct a static charge to ground.
• Cover: Black SBR for resistance to abrasion, cuts, gouging, scuffs and weathering resistance.
Applications:
- media
• Slurries
• Water
- usage
• Irrigation
• Surface mining
Safety/Technical:
• Design Factor: 3:1 -
Large Diameter Heavy Duty Custom Made Water Suction Hose,...
Parker's Series EW301 Large Diameter Heavy Duty Custom Made Water Suction Hose provides excellent medium pressure, heavy duty service across multiple applications. The wire helix provides full suction capability and flexibility, making the hose easy to handle. The basic hose construction may be modified to customer-specified requirements, including brand, length pattern and built-in coupling configurations. Parker will quickly design and build a custom made product to satisfy specific application requirements and will drop-ship in protective packaging, eliminating the cost of additional handling and the need to compromise on hose performance.
Markets:
• Agriculture
• Construction
• General Industrial
Features/Benefits:
• Tube: Black SBR for economical service to 180°F.
• Reinforcement: Multiple textile plies for strength and durability, and a wire helix for full suction capability and a path to conduct a static charge to ground.
• Cover: Black SBR for resistance to abrasion, cuts, gouging, scuffs and weathering resistance.
• Couplings: Per customer requirements
Applications:
- media
• Slurries
• Water
- usage
• Irrigation
• Surface mining
Safety/Technical:
• Design Factor: 3:1 (plain ends); 4:1 (built-in ends) -
Marine Softwall Wet Exhaust Hose, Series SS269
Parker's Series SS269 Marine Softwall Wet Exhaust Hose provides excellent service across a variety of onboard marine wet exhaust applications. The hose is flexible for easy routing/installation and resists oil and high temperatures common to engine compartments. Series SS269 absorbs more vibration than rigid pipe or tubing. The hose is available in multiple incremental sizes for connection to various sizes of pipe used in the marine industry, providing off-the-shelf convenience.
Markets:
• Marine
Features/Benefits:
• Tube: Black nitrile for oil and hot exhaust fumes compatibility to 200°F.
• Reinforcement: Multiple textile plies for strength and durability.
• Cover: Black nitrile heat and oil resistance.
Applications:
-media
• Hot exhaust fumes
• Oil
• Water
• Wet exhaust
-usage
• Cooling systems
• Heat exchangers
• Wet exhaust systems
Industry Standards:
• ABYC
• SAE J2006 R1
• USCG
Safety/Technical:
• Design Factor: 4:1
• Do not use with refined fuel, or in hardwall/suction applications.
Warnings:
• Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to NAHAD Industrial Hose Assembly Guidelines. -
Custom Made Heavy Duty Marine Softwall Wet Exhaust Hose,...
Parker's Series ES269 Custom Made Marine Softwall Wet Exhaust Hose provides excellent heavy duty service across a variety of onboard marine wet exhaust applications. The hose is flexible for easy routing/installation and resists oil and high temperatures common to engine compartments. Series ES269 absorbs more vibration than rigid pipe or tubing. The basic hose construction may be modified to customer-specified requirements, including length pattern. Parker will quickly design and build a custom made product to satisfy specific application requirements and will drop-ship in protective packaging, eliminating the cost of additional handling and the need to compromise on hose performance.
Markets:
• Marine
Features/Benefits:
• Tube: Black nitrile for oil and hot exhaust fumes compatibility to 200°F.
• Reinforcement: Multiple textile plies for strength and durability.
• Cover: Black nitrile heat and oil resistance.
Applications:
-media
• Hot exhaust fumes
• Oil
• Water
• Wet exhaust
-usage
• Cooling systems
• Heat exchangers
• Wet exhaust systems
Industry Standards:
• ABYC
• SAE J2006 R1
• USCG
Safety/Technical:
• Design Factor: 4:1
• Do not use with refined fuel, or in hardwall/suction applications.
• Custom Made Hose Engineering Hot Lines
- Eastern USA
1-800-438-2004
7:00 am—4:30 pm ET
- Western USA
1-800-783-3922
10:00 am—7:00 pm ET
Warnings:
• Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to NAHAD Industrial Hose Assembly Guidelines. -
Hydrocarbon High Temperature Oil Resistant Drain Hose, Series...
Parker's Series 7200 Hydrocarbon High Temperature Oil Resistant Drain Hose provides excellent service in the cleaning process for storage tanks and vessels and a wide variety of medium pressure applications. The rugged construction resists abrasion, oil, weathering and attack by steam vapors and petroleum-based runoff to provide maximum performance. Series 7200 hose is durable, crush resistant and kink resistant for easy handling and long service life. The hose features a distinctive blue cover for easy identification, and is qualified with permanent crimp couplings for a safe and secure connection.
Markets:
• General Industrial
• Oil & Gas
Features/Benefits:
• Tube: Black nitrile for exceptional heat and oil resistance to 350°F.
• Reinforcement: One wire braid for extreme strength and a slim profile.
• Cover: Blue chloroprene for abrasion, oil and weathering resistance.
• Couplings: Qualified with steel crimp couplings for a durable, safe and secure connection.
Applications:
- media
• Hot oil residue
• Mild chemicals
- usage
• Storage tank cleaning/drainage
• Refineries
Safety/Technical:
• Click here to access CrimpSource® for current crimp specifications.
• Do not use for steam service. -
Large Diameter Heavy Duty Custom Made Fire Engine Suction...
Parker's Series LW701 Large Diameter Heavy Duty Custom Made Fire Engine Suction Hose provides excellent medium pressure, heavy duty service across multiple applications. The wire helix provides full suction capability and flexibility, making the hose easy to handle. The basic hose construction may be modified to customer-specified requirements, including brand, length pattern and soft cuffs. Parker will quickly design and build a custom made product to satisfy specific application requirements and will drop-ship in protective packaging, eliminating the cost of additional handling and the need to compromise on hose performance.
Markets:
• Fire Suppression
Features/Benefits:
• Tube: Black SBR for economical service to 180°F.
• Reinforcement: Multiple textile plies for strength and durability, and a wire helix for full suction capability and a path to conduct a static charge to ground.
• Cover: Black SBR for resistance to abrasion, cuts, gouging, scuffs and weathering.
Applications:
- media
• Water
- usage
• Fire suppression equipment
• Airports
• Municipalities
Industry Standards:
• NFPA 1901, 1962
Safety/Technical:
Design Factor: 4:1 -
Large Diameter Heavy Duty Custom Made Corrugated Fire Engine...
Parker's Series LW720 Large Diameter Heavy Duty Custom Made Corrugated Fire Engine Suction Hose provides excellent medium pressure, heavy duty service across multiple applications. The wire helix provides full suction capability and the corrugated cover provides abrasion resistance, weathering resistance and additional flexibility for easy handling. The basic hose construction may be modified to customer-specified requirements, including brand, length pattern and soft cuffs. Parker will quickly design and build a custom made product to satisfy specific application requirements and will drop-ship in protective packaging, eliminating the cost of additional handling and the need to compromise on hose performance.
Markets:
• Fire Suppression
Features/Benefits:
• Tube: Black SBR for economical service to 180°F.
• Reinforcement: Multiple textile plies for strength and durability, and a wire helix for full suction capability and a path to conduct a static charge to ground.
• Cover: Black corrugated SBR for resistance to abrasion, cuts, gouging, scuffs and weathering.
Applications:
- media
• Water
- usage
• Fire suppression equipment
• Airports
• Municipalities
Industry Standards:
• NFPA 1901, 1962
Safety/Technical:
• Design Factor: 4:1 -
Reinforced Conduit Hose, Series 7337
Parker's Series 7337 Reinforced Conduit Hose provides excellent service as heavy duty, rugged, abrasion resistant protection for cable, hose and tubing. The thick hose wall is extremely durable, and flame retardant to protect operators from fire hazards. Series 7337 is available in 200-foot continuous lengths.
Markets:
• General Industrial
• Underground Mining
Features/Benefits:
• Tube: Black synthetic rubber for durable service to 180°F.
• Reinforcement: Multiple textile plies for strength and durability.
• Cover: Black synthetic rubber for resistance to abrasion, cuts, gouging and scuffs.
Applications:
-usage
• Conduit
• Protection for cable, hose, tubing, wiring
Industry Standards:
• MSHA -
Large Diameter Custom Made Heavy Duty Petroleum Service Dock...
Parker's Series EW339 Large Diameter Custom Made Heavy Duty Petroleum Service Dock Hose provides excellent medium pressure, heavy duty service across multiple bulk loading/unloading applications. The basic hose construction may be modified to customer-specified requirements, including brand, length pattern and built-in coupling configurations. Parker will quickly design and build a custom made product to satisfy specific application requirements and will drop-ship in protective packaging, eliminating the cost of additional handling and the need to compromise on hose performance.
Markets:
• General Industrial
• Marine
Features/Benefits:
• Tube: Black nitrile for exceptional oil resistance to 180°F.
• Reinforcement: Multiple textile plies for strength and durability, and a wire helix for full suction capability and a path to conduct a static charge to ground.
• Cover: Black synthetic rubber for abrasion and weathering resistance and durability.
• Couplings: Per customer requirements
Applications:
- media
• Fuel to 50% aromatic content
• Oil
- usage
• Barges
• Bulk depots/terminals
• Docks
• Marine vessels
• Storage tanks
Industry Standards:
• USCG
Safety/Technical:
Custom Made Hose Engineering Hot Lines
- Eastern USA
1-800-438-2004
7:00 am—4:30 pm ET
- Western USA
1-800-783-3922
10:00 am—7:00 pm ET -
Large Diameter Custom Made Heavy Duty Petroleum Service Dock...
Parker's Series EW355 Large Diameter Custom Made Heavy Duty Petroleum Service Dock Hose provides excellent medium pressure, heavy duty service across multiple bulk loading/unloading applications. The basic hose construction may be modified to customer-specified requirements, including brand, length pattern and built-in coupling configurations. Parker will quickly design and build a custom made product to satisfy specific application requirements and will drop-ship in protective packaging, eliminating the cost of additional handling and the need to compromise on hose performance.
Markets:
• General Industrial
• Marine
Features/Benefits:
• Tube: Black nitrile for exceptional oil resistance to 180°F.
• Reinforcement: Multiple textile plies for strength and durability, and a wire helix for full suction capability and a path to conduct a static charge to ground.
• Cover: Black synthetic rubber for abrasion and weathering resistance and durability.
• Couplings: Per customer requirements
Applications:
- media
• Fuel to 50% aromatic content
• Oil
- usage
• Barges
• Bulk depots/terminals
• Docks
• Marine vessels
• Storage tanks
Industry Standards:
• USCG
Safety/Technical:
• Design Factor: 4:1 -
Large Diameter Custom Made Heavy Duty Dredge/Sand Suction...
Parker's Series EW708 Large Diameter Custom Made Heavy Duty Dredge/Sand Suction Hose provides excellent heavy duty service as a flexible connection across multiple high pressure dredging and bulk transfer and applications. The thick rubber tube provides additional resistance to abrasive materials going through the hose and the cover provides resistance to abrasion and weathering for maximum performance. The basic hose construction may be modified to customer-specified requirements, including brand, length pattern and built-in coupling configurations. Parker will quickly design and build a custom made product to satisfy specific application requirements and will drop-ship in protective packaging, eliminating the cost of additional handling and the need to compromise on hose performance.
Markets:
• Construction
• Dredging
• General Industrial
Features/Benefits:
• Tube: Black 3/8” thick natural rubber for exceptional abrasion resistance to 150°F.
• Reinforcement: Multiple textile plies for strength and durability, and a wire helix for full suction capability and a path to conduct a static charge to ground.
• Cover: Black SBR for resistance to abrasion, cuts, gouging, scuffs and weathering resistance.
• Couplings: Per customer requirements
Applications:
- media
• Abrasive materials
• Debris
• Gravel
• Sand
• Slurries
- usage
• Bays
• Beaches
• Harbors
• Lakes
• Ocean fronts
• Ports
• Rivers
• Dredging equipment
• Surface mines/quarries
Safety/Technical:
• Design Factor: 4:1 -
Large Diameter Heavy Duty Custom Made Hot Air Hose, Series EW360
Parker's Series EW360 Large Diameter Heavy Duty Custom Made Hot Air Hose provides excellent low pressure, heavy duty service across multiple applications. The wire helix provides full suction capability and flexibility, making the hose easy to handle, and the specially formulated rubber compounds keep the hose from drying out, cracking and prematurely failing. The basic hose construction may be modified to customer-specified requirements, including brand, length pattern and built-in coupling configurations. Parker will quickly design and build a custom made product to satisfy specific application requirements and will drop-ship in protective packaging, eliminating the cost of additional handling and the need to compromise on hose performance.
Markets:
• Agriculture
• General Industrial
• Transportation
Features/Benefits:
• Tube: Black EPDM for high temperature compatibility to 300°F.
• Reinforcement: Multiple textile plies for strength and durability, and a wire helix for full suction capability and a path to conduct a static charge to ground.
• Cover: Black EPDM for resistance to abrasion, heat and weathering.
Applications:
- media
• Hot air
- usage
• Bulk loading/unloading
• Bulk delivery/transport trucks
• In-plant transfer
Safety/Technical:
Custom Made Hose Engineering Hot Lines
- Eastern USA
1-800-438-2004
7:00 am—4:30 pm ET
- Western USA
1-800-783-3922
10:00 am—7:00 pm ET -
Large Diameter Custom Made Heavy Duty Hot Tar and Asphalt Dock...
Parker's Series EW499 Large Diameter Custom Made Heavy Duty Hot Tar and Asphalt Hose provides excellent medium pressure, heavy duty service across multiple bulk loading/unloading applications. The basic hose construction may be modified to customer-specified requirements, including brand, length pattern and built-in coupling configurations. Parker will quickly design and build a custom made product to satisfy specific application requirements and will drop-ship in protective packaging, eliminating the cost of additional handling and the need to compromise on hose performance.
Markets:
• General Industrial
• Marine
Features/Benefits:
• Tube: Black FKM fluoroelastomer for superior hot oil resistance to 300°F.
• Reinforcement: Multiple textile plies for strength and durability, and a wire helix for full suction capability and a path to conduct a static charge to ground.
• Cover: Black synthetic rubber for abrasion and weathering resistance and durability.
• Couplings: Per customer requirements
Applications:
- media
• Hot asphalt
• Hot tar
• Hot oil
- usage
• Barges
• Bulk depots/terminals
• Docks
• Marine vessels
• Storage tanks
Industry Standards:
• USCG
Safety/Technical:
Custom Made Hose Engineering Hot Lines
- Eastern USA
1-800-438-2004
7:00 am—4:30 pm ET
- Western USA
1-800-783-3922
10:00 am—7:00 pm ET -
Large Diameter Custom Made Heavy Duty Petrochemical Dock Hose,...
Parker's Series EW399 Large Diameter Custom Made Heavy Duty Petrochemical Dock Hose provides excellent medium pressure, heavy duty service across multiple bulk loading/unloading applications. The basic hose construction may be modified to customer-specified requirements, including brand, length pattern and built-in coupling configurations. Parker will quickly design and build a custom made product to satisfy specific application requirements and will drop-ship in protective packaging, eliminating the cost of additional handling and the need to compromise on hose performance.
Markets:
• General Industrial
• Marine
Features/Benefits:
• Tube: Black FKM fluoroelastomer for superior chemical and oil resistance to 180°F.
• Reinforcement: Multiple textile plies for strength and durability, and a wire helix for full suction capability and a path to conduct a static charge to ground.
• Cover: Black synthetic rubber for abrasion and weathering resistance and durability.
• Couplings: Per customer requirements
Applications:
- media
• Fuel to 100% aromatic content
• Oil
• Petrochemicals
- usage
• Barges
• Bulk depots/terminals
• Docks
• Marine vessels
• Storage tanks
Industry Standards:
• USCG
Safety/Technical:
Custom Made Hose Engineering Hot Lines
- Eastern USA
1-800-438-2004
7:00 am—4:30 pm ET
- Western USA
1-800-783-3922
10:00 am—7:00 pm ET -
Large Diameter Custom Made Heavy Duty Hot Molten Sulphur Dock...
Parker's Series EW460 Large Diameter Custom Made Heavy Duty Hot Molten Sulphur Dock Hose provides excellent medium pressure, heavy duty service across multiple bulk loading/unloading applications. The basic hose construction may be modified to customer-specified requirements, including brand, length pattern and built-in coupling configurations. Parker will quickly design and build a custom made product to satisfy specific application requirements and will drop-ship in protective packaging, eliminating the cost of additional handling and the need to compromise on hose performance.
Markets:
• General Industrial
• Marine
Features/Benefits:
• Tube: Black EPDM for superior hot chemical resistance to 300°F.
• Reinforcement: Multiple textile plies for strength and durability, and a wire helix for full suction capability and a path to conduct a static charge to ground.
• Cover: Black EPDM for abrasion and weathering resistance and durability.
• Couplings: Per customer requirements
Applications:
- media
• Hot molten sulphur
- usage
• Barges
• Bulk depots/terminals
• Docks
• Marine vessels
• Storage tanks
Industry Standards:
• USCG
Safety/Technical:
Custom Made Hose Engineering Hot Lines
- Eastern USA
1-800-438-2004
7:00 am—4:30 pm ET
- Western USA
1-800-783-3922
10:00 am—7:00 pm ET -
Marine Power Tilt Hose - PTH Series
Parker’s Marine Hose for power tilt applications is compact, flexible and corrosion resistant. PTH hose is best suited for marine applications that involve power tilt mechanisms for outboard and stern drive engines, trim tab assemblies and jack plate assemblies. The hoses are constructed of a nylon tube, reinforced with a fiber and stainless steel braid, and protected with a reliable, abrasion resistant polyurethane jacket. The hose is manufactured with a clear polyurethane jacket; however, a black cover is also available as custom order. For more information review the literature listed under the Product Support tab.
Markets:
• Marine
Features/Benefits:
• Compact design
• Abrasion resistant polyurethane cover
• Excellent flexibility to simplify installation and routing and usage
• Corrosion resistant for added protection
Applications:
• Power tilt mechanisms for outboard and stern drive engines
• Trim tab assemblies
• Jack plate assemblies
Technical Specifications:
Cover: Non-perforated
• Also available as custom order with black jacket
• Hose I.D. is nominal
• Hose O.D. is maximum -
Fast Response Marine Steering Hose – MSH Series 1000 psi
MSH hose is a thermoplastic hose for marine steering applications, specifically, outboard hydraulic steering systems where fast accurate response is needed to ensure proper control of the boat. MSH hose is a marine grade hose with a corrosion resistant, thermoplastic construction. It is ideal for salt water and fresh water environments.
Parker MSH hose is qualified with both permanent and field attachable brass fittings.
Markets:
• Marine
Features/Benefits:
• Fast, accurate response
• Permanent or field attachable brass fittings
• Corrosion resistant thermoplastic construction
Applications:
• Marine steering systems
Technical Specifications:
• Cover: Non-perforated
• HBR bend restrictor is available for permanent fittings only
• Hose I.D. is nominal
• Hose O.D. is maximum -
Compressed Natural Gas Hose - Electrically Conductive - 5CNG
5CNG compressed natural gas hose for on-vehicle fuel systems and CNG dispensers is used to transfer compressed natural gas (CNG). 5CNG hose is up to 30% lighter than rigid tubing and is supplied in a single-line or bonded twin-line CNG hose assembly. A twin-line hose assembly can reduce part number complexity and eliminate tangled hoses in a dispenser system.
Markets:
• Transportation
• Refueling Stations
• Automotive
Features/Benefits:
• Light weight
• Electrically conductive nylon core tube
• Twin-line hose assemblies prevent tangling
• CSA listed
• Available in ¼” (-4) to 1” (-16)
Applications:
• CNG dispenser
• Fleet transit
• CNG fuel transfer
• Residential CNG refueling
Technical Specifications:
• Tube: Electrically conductive nylon
• Reinforcement: Fiber
• Cover: Red polyurethane, perforated
• CNG hose must be assembled at the factory or by a Parflex approved facility
• Appropriate wire and vinyl guards must be used on ANSI/CSA compliant single-line and twin-line bonded hose assemblies
-4 to -8 SS wire guards
-12 & -16 Vinyl guards
• Hose I.D. is nominal
• Hose O.D. is maximum -
Wąż SCR do elektrycznego podgrzewania i przesyłu płynu DEF
Przewody SCR są przeznaczone do podgrzewania i przesyłania płynu DEF (Diesel Exhaust Fluid, znanego też jako AdBlue) przez układy selektywnej redukcji katalitycznej (SCR) w pojazdach użytkowych. Węże SCR firmy Parker są specjalnie wykonywane z wytłaczaną powłoką na elementach grzejnych unieruchamiającą je dla uzyskania dodatkowej ochrony i długotrwałego, równomiernego ogrzewania. Parker stosuje również proces zalewania, aby dodatkowo zabezpieczyć wszystkie sploty przewodów.
W wężu SCR firmy Parker wykorzystuje się elektryczny układ ogrzewania, przy czym zarówno wąż, jak i łączniki są ogrzewane przez te same druty grzejne o ciągłej regulowanej rezystancji. Stworzono je z myślą o maszynach drogowych i terenowych, a jednocześnie pomagają zachować zgodność z normami Tier IV i EPA 10.
Rynki:
• Transport
• Sprzęt mobilny
Cechy i korzyści
• Zastosowanie elektrycznego układu ogrzewania, w którym zarówno wąż, jak i łączniki są ogrzewane przez te same druty grzejne o ciągłej regulowanej rezystancji, w celu zapewnienia stałej wydajności rozmrażania
• Dostępnych wiele opcji, co umożliwia wybranie produktu odpowiedniego do każdego zastosowania
• Odporność na uderzenia i wodę oraz zwiększona wytrzymałość łączników i ich odporność na uderzenia (patrz dostępne certyfikaty IP) dzięki zalewanej powłoce ochronnej
• Wytłaczana powłoka na elementach grzejnych unieruchamiająca je dla uzyskania dodatkowej ochrony i długotrwałego, równomiernego ogrzewania
• Zewnętrzna certyfikacja Parflex Division w zakresie norm ISO 14001 oraz IATF 16949
Zastosowania
• Transport płynu DEF
o Sprzęt rolniczy
o Sprzęt budowlany
o Pojazdy drogowe i autobusy
o Samochody ciężarowe
o Stacjonarne agregaty prądotwórcze
o Lokomotywy spalinowe z silnikiem wysokoprężnym
Certyfikaty i zgodność:
• Zewnętrzna certyfikacja Parflex Division w zakresie norm ISO 14001 oraz IATF 16949
• Dostępne certyfikaty IP6X, IPX8 oraz IPX9K
Dane techniczne
• Produkty z rdzeniem nylonowym dostępne ze średnicą wewnętrzną 6 mm
• Produkty z rdzeniem z EPDM o średnicy wewnętrznej 4 mm i 5,5 mm
• Dostępne w wersjach 12 V DC lub 24 V DC -
Heavy Wall Convoluted PTFE Hose with 316 Stainless Steel Braid...
SCWV/SCBV Heavy Wall Convoluted PTFE Hoses feature a heavier wall core tube (up to33% more PTFE) than SCW/SCB hoses, allowing them to handle vacuum applications at elevated temperatures. They feature a stainless steel braid reinforcement for increased durability, exceptional chemical compatibility, and an open pitch design for additional kink resistance and reduced permeation. Unlike metal hose, which is susceptible to stress and cracking in flexing applications, Parker’s SCWV/SCBV reveals no signs of stress cracking, even after 1 million cycles of flex testing.
SCWV/SCBV hoses are manufactured from virgin convoluted PTFE tubing in a FDA compliant natural or non-FDA compliant black static-dissipative style. For more information regarding specific operating parameters and technical specifications, refer to the literature listed on the Product Support tab.
Markets:
• Fluid Handling
• Industrial
• Paint
• Semiconductor
• Food & Beverage
Features/Benefits:
• High temperature hose
• Thick wall core tube has up to 33% more PTFE to handle vacuum applications at elevated temperatures
• Open pitch design for additional kink resistance and reduced permeation
• Excellent chemical compatibility
• Easy cleaning
• Non-adhesive
Applications:
• Fluid handling
• Chemical transfer
• Paint
• Semiconductor
Certifications/Compliance:
• FDA 21 CFR 177.1550
• USP Class VI
• ISO 10993 Sections 5, 6, 10, 11
Technical Specifications:
• Tube: SCWV - Heavy Wall Natural FDA Compliant PTFE
SCBV - Heavy Wall Black Static-dissipative PTFE
• Reinforcement: 316 Stainless Steel braid
• Factory-made assemblies only
• Not suggested for steam-cold water cycling applications
• See Catalog 4660 for part numbering system
• Used with PAGE fittings and crimp collar SC300 only
• Vacuum wire recommended for 2-1/2, 3 and 4 inch in high temperature / high vacuum applications -
High Temperature Power Wash Hose - 1035HT
High Temperature Power Wash Hose is designed for use with low pressure power washers or as a carpet cleaning hose for carpet cleaning machines as long as chlorinated solvents are not used. A hose bend restrictor is available for carpet cleaning applications to prolong hose life due to flex fatigue. The design construction of 1035HT allows for a wide temperature range for media transfer while providing a non-marring, abrasion resistant cover ideal for common 1035HT applications.
Markets:
• Industrial
Features/Benefits:
• Non-marring jacket
• Broad temperature range
Applications:
• Low pressure power washers
• Carpet cleaning machines
Technical Specifications:
• Tube: Nylon
• Reinforcement: Fiber
• Cover: Yellow polyurethane, perforated
• Do not use with chlorinated solvents
• Hose bend restrictor (HBR) available and suggested for carpet cleaning applications
• Hose I.D. is nominal
• Hose O.D. is maximum -
Large Diameter Custom Made Heavy Duty Petroleum Discharge...
Parker's Series ES145 Large Diameter Custom Made Heavy Duty Petroleum Discharge Hose provides excellent high pressure, heavy duty service across multiple bulk loading/unloading applications. The basic hose construction may be modified to customer-specified requirements, including brand, length pattern and built-in coupling configurations. Parker will quickly design and build a custom made product to satisfy specific application requirements and will drop-ship in protective packaging, eliminating the cost of additional handling and the need to compromise on hose performance.
Markets:
• General Industrial
• Transportation
Features/Benefits:
• Tube: Black nitrile for exceptional oil resistance to 180°F.
• Reinforcement: Multiple textile plies for strength and durability, and a static wire for a path to conduct a static charge to ground.
• Cover: Black nitrile for oil and weathering resistance and durability.
• Couplings: Per customer requirements
Applications:
- media
• Biodiesel (to B100 in dedicated service)
• Diesel
• Ethanol
• Gasoline
• Oil
- usage
• Bulk depots/terminals
• Delivery/transport
• In-plant transfer
• Rail cars
• Storage tanks
Safety/Technical:
Custom Made Hose Engineering Hot Lines
- Eastern USA
1-800-438-2004
7:00 am—4:30 pm ET
- Western USA
1-800-783-3922
10:00 am—7:00 pm ET -
Predator® Sewer Jetting and Cleaning Hoses
Parkers Predator® Sewer Hoses are available in three different options for jetting and cleaning: S5N (Water Jetting/Lateral Cleaning 4,000 psi), S6 (Sewer Cleaning 2,500 psi) and S9 (Sewer Cleaning 3,000 psi). Each Predator hose is designed with a unique cover color, in compliance with industry standard, to quickly identify the working pressure of each hose and simplify line identification for service personnel and maintenance purposes.
The Predator sewer hose maintains its reputation by delivering the highest level of quality and rugged performance in the industry. For larger volume and higher pressure applications, the S6 and S9 sewer cleaning hoses are available in a bonded twin-line construction. Whether your application involves lateral drain cleaning, water jetting or sewer cleaning service, Parker has the hoses, fittings, equipment and system support to do the job. For more information, such as specific operating parameters and detailed technical specifications, refer to the latest literature on the Product Support tab.
Markets:
• Municipal Sewer Cleaning
• Residential Sewer Cleaning
• Lateral Drain CleaningFeatures/Benefits:
• Easily identified lime green (S5N-4,000 psi), orange (S6-2,500 psi) or blue (S9-3,000) covers to signify constant working pressures
• S5N is lightweight and has a compact profile to provide easy handling and routing during sewer cleaning
• Bonded construction available for S6 and for large volume applicationsApplications:
• High-pressure water equipment for cleaning or debris removal in lateral sewer lines
• For water/slurry applications
• S5N lines provide connection from commercial, industrial or residential structure to the main sewer line located under the streetsNotes:
• Factory-made assemblies only
• S6 and S9 - Used in large sewer lines. All standard assembly lengths coupled with rigid male pipe each end; packaged on heavy duty wood reels
• S5N hose is used on lateral lines which are smaller in diameter than the main lines and rely more on water pressure than water volume to clear residue and obstructions; packaged on plastic reels
• For water/slurry applications, contact Parflex for chemical compatibility recommendations
• Not for use in hydraulic applications -
Inert Gas Hose for Arc Welding Systems, Series 7123
Parker's Series 7123 Inert Gas Hose for Arc Welding Systems provides excellent service across a wide variety of industrial and commercial applications. The hose is available in long continuous lengths for efficient inventory management and maximum utility at cramped or hard to reach job sites. The black cover is ribbed for easy tactile identification.Markets:• Construction• General Industrial• Oil & GasFeatures/Benefits:• Tube: Black EPDM for inert gas compatibility to 200°F.• Reinforcement: Multiple textile plies for strength and kink resistance.• Cover: Black EPDM for abrasion and weathering resistance.Applications:- media• Inert/shield gas• Argon• Carbon Dioxide• Helium• Nitrogen- usage• Arc welding systems• Auto body shops• Craft shops• Foundries• Garages• Mines• Oilfield• Plumber shops• Rail yards• Salvage• Scrap yards• Ship yards• Steel millsIndustry Standards:• CGA E-1 color requirementsSafety/Technical:• Design Factor: 4:1 -
Nonconductive Cable Cover Hose, Series 7172
Parker's Series 7172 Nonconductive Cable Cover Hose provides excellent service across a wide variety of industrial and commercial applications. The hose is electrically nonconductive, protecting operators from electrical shock, and is available in long continuous lengths for efficient inventory management.
Markets:
• Construction
• General Industrial
• Oil & Gas
Features/Benefits:
• Tube: Black nitrile/SBR blend for heat resistance to 200°F.
• Reinforcement: Multiple textile plies for strength and kink resistance.
• Cover: Black EPDM for abrasion, heat and weathering resistance.
Applications:
- media
• Water
- usage
• Arc welding systems
- setting
• Auto body shops
• Craft shops
• Garages
• Mines
• Oilfield
• Plumber shops
• Railyards
• Salvage
• Scrapyards
• Shipyards
• Steel mills
Safety/Technical:
• The hose construction is electrically nonconductive with a minimum resistance of one megohm per inch at 1000 volts DC.
• The user must determine if the hose is suitable for applications subject to electrical hazard. Contact Parker for additional information. -
Large Diameter Custom Made Heavy Duty Tank Truck Hose, Series...
Parker's Series EW353 Large Diameter Custom Made Heavy Duty Tank Truck Hose provides excellent medium pressure, heavy duty service across multiple bulk loading/unloading applications. The basic hose construction may be modified to customer-specified requirements, including brand, length pattern and built-in coupling configurations. Parker will quickly design and build a custom made product to satisfy specific application requirements and will drop-ship in protective packaging, eliminating the cost of additional handling and the need to compromise on hose performance.
Markets:
• General Industrial
• Transportation
Features/Benefits:
• Tube: Black nitrile for exceptional oil resistance to 180°F.
• Reinforcement: Multiple textile plies for strength and durability, and a wire helix for full suction capability and a path to conduct a static charge to ground.
• Cover: Black nitrile for oil and weathering resistance and durability.
• Couplings: Per customer requirements
Applications:
- media
• Biodiesel (to B100 in dedicated service)
• Diesel
• Ethanol
• Gasoline to 50% aromatic content
• Oil
- usage
• Barges
• Bulk depots/terminals
• Delivery/transport
• Docks
• In-plant transfer
• Marine vessels
• Rail cars
• Storage tanks
Safety/Technical:
Custom Made Hose Engineering Hot Lines
- Eastern USA
1-800-438-2004
7:00 am—4:30 pm ET
- Western USA
1-800-783-3922
10:00 am—7:00 pm ET -
Grade T Single Line Fuel Gas Welding Hose, Series 7141
Parker's Series 7141 Grade T Single Line Fuel Gas Welding Hose provides excellent service across a wide variety of industrial and commercial applications. The hose is compatible with multiple fuel gases, and is available in long continuous lengths for efficient inventory management and maximum utility at cramped or hard to reach job sites where the gas sources are separated and a twin line is not practical. The red cover is ribbed for easy visual and tactile identification. Series 7141 is a versatile hose for many common industrial welding applications.
Markets:
• Construction
• General Industrial
• Oil & Gas
Features/Benefits:
• Tube: Black chloroprene for flame and oil resistance, and compatibility with multiple fuel gases.
• Tube: Non-blooming to minimize the migration of combustible plasticizers and waxes to the surface of the hoses.
• Reinforcement: Multiple textile plies for strength and kink resistance.
• Cover: Red chloroprene for abrasion, flame, oil and weathering resistance.
Applications:
- media
• Fuel gas (including acetylene)
- usage
• Bending
• Brazing
• Cutting
• Fabricating
• Gouging
• Joining
• Piercing
• Preheating
• Post-heating
• Severing
• Soldering
• Straightening
• Surfacing
• Trimming
- setting
• Auto body shops
• Craft shops
• Garages
• Mines
• Oilfield
• Plumber shops
• Railyards
• Salvage
• Scrapyards
• Shipyards
• Steel mills
Industry Standards:
• ARPM IP-7
• CGA E-1
Safety/Technical:
• Grade T is also suitable for use with inert gas. -
Grade T Single Line Oxygen Welding Hose, Series 7142
Parker's Series 7142 Grade T Single Line Oxygen Welding Hose provides excellent service across a wide variety of industrial and commercial applications. The hose is available in long continuous lengths for efficient inventory management and maximum utility at cramped or hard to reach job sites where the gas sources are separated and a twin line is not practical. The green cover is ribbed for easy visual and tactile identification. Series 7142 is a versatile hose for many common industrial welding applications.
Markets:
• Construction
• General Industrial
• Oil & Gas
Features/Benefits:
• Tube: Black chloroprene for flame and oil resistance, and compatibility with oxygen.
• Tube: Non-blooming to minimize the migration of combustible plasticizers and waxes to the surface of the hoses.
• Reinforcement: Multiple textile plies for strength and kink resistance.
• Cover: Green chloroprene for abrasion, flame, oil and weathering resistance.
Applications:
- media
• Oxygen
- usage
• Bending
• Brazing
• Cutting
• Fabricating
• Gouging
• Joining
• Piercing
• Preheating
• Post-heating
• Severing
• Soldering
• Straightening
• Surfacing
• Trimming
- setting
• Auto body shops
• Craft shops
• Garages
• Mines
• Oilfield
• Plumber shops
• Railyards
• Salvage
• Scrapyards
• Shipyards
• Steel mills
Industry Standards:
• ARPM IP-7
• CGA E-1
Safety/Technical:
• Grade T is also suitable for use with inert gas. -
Paint Fluid Hose, Series 7108
Parker's Series 7108 provides excellent service across a wide variety of chemical media used in paint transfer and air powered paint spray systems. The hose tube will not leach into and contaminate the product being conveyed and resists mild chemicals, oil and weathering to provide maximum performance. Series 7108 is qualified with permanent crimp couplings for a safe and secure connection.
Markets:
• Construction
• General Industrial
• Manufacturing
Features/Benefits:
• Tube: Translucent nylon for chemical resistance to 200°F.
• Reinforcement: Multiple aramid plies for strength and durability.
• Cover: Black chloroprene for abrasion and oil and resistance.
• Couplings: Qualified with steel crimp couplings for a durable, safe and secure connection.
Applications:
• Mild chemicals
• Lacquers
• Paints & paint thinners
• Solvents
• Air powered paint systems
• In-plant and tank transfer
• Mixing operations
Safety/Technical:
•Click here to access CrimpSource® for current crimp specifications.
• Click here to link to Hose & Chemical Guides.
• Do not use in high pressure paint spray applications requiring a statically conductive hose. -
PVC Fire Extinguisher Booster Hose, Series 167
Parker's Series 167 PVC Fire Extinguisher Booster Hose is flexible and kink resistant for easy handling and reliable service in an emergency. The hose is manufactured to close tolerances, eliminating the need for multiple coupling components and reducing labor costs in high volume assembly operations. The hose is resistant to abrasion, ozone and weathering for maximum performance.
Markets:
• Fire Suppression
• General Industrial
Features/Benefits:
• Tube: Black blended PVC, 72A durometer for durability to -65°F.
• Reinforcement: Multiple textile plies for strength and durability.
• Cover: Black blended PVC, 72A durometer for abrasion resistance, durability and flexibility.
Applications:
- media
• Fire suppression chemicals
• Water
- usage
• Assembly lines
• Commercial and retail facilities
• Fabrication and manufacturing facilities
• Residences
Industry Standards:
• UL92
Safety/Technical:
• Dimensions can be adjusted to accommodate customer couplings. Contact Parker.
Warnings:
• Working pressures are at +68°F (+20°C). Higher temperatures reduce the available working pressure. -
Anhydrous Ammonia Hose, Series 7261
Parker's Series 7261 Anhydrous Ammonia Hose provides superior service in agricultural and industrial applications. The braided stainless steel reinforcement provides extreme corrosion, crush and kink resistance for operator safety. The cover features a silver stripe for easy identification, and resists abrasion, chemicals and weathering for maximum durability and performance. Series 7261 is qualified with permanent crimp couplings for a safe and secure connection and provides robust service in challenging applications.
Markets:
• Agriculture
• General Industrial
Features/Benefits:
• Tube: Black EPDM for chemical resistance to 180°F.
• Reinforcement: One or multiple stainless steel braids and one textile braid for corrosion and kink resistance, strength and durability.
• Cover: Black EPDM for abrasion and chemical resistance.
• Cover: Silver longitudinal stripe for easy identification.
• Couplings: Qualified with steel crimp couplings for a durable, safe and secure connection.
Applications:
-media
• Anhydrous ammonia
-usage
• Bulk depots and storage facilities
• In-plant transfer
• Farm fertilizing equipment and systems
• Commercial and Industrial refrigeration equipment supply lines
Industry Standards:
• ARPM IP-14
Safety/Technical:
• Design Factor: 5:1
• Series 7261 is a non-stock, seasonal product available only through Parker Select Anhydrous Ammonia Hose Assembly Fabricators. Contact Parker for a referral.
Warnings:
• For Anhydrous Ammonia use ONLY. Do not use in Liquid Petroleum Gas (LPG)/Propane or Natural Gas applications. Use only with couplings qualified by Parker. Do not use with couplings containing hidden o-rings such as male swivel couplings. For non-agricultural or refrigeration applications, contact Parker.
• Contact with Anhydrous Ammonia (NH3) will burn skin and is especially damaging to the eyes and lungs. This is true for its liquid and gaseous (vapor) state. Many accidents involving NH3 have occurred by using the wrong hose. NH3 hose must be specially compounded and constructed to handle the media. NEVER use a hose that is not designed for NH3 because it may fail very quickly and cause bodily injury or death. It is especially important to ensure that only Anhydrous Ammonia hose is recommended and used for this service. Refer to ARPM Publications IP-14 “Anhydrous Ammonia Hose, Specifications” and IP-11-2 “Anhydrous Ammonia Hose, Manual for Maintenance, Testing and Inspection.”
• Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to the NAHAD Industrial Hose Assembly Guidelines. -
WILDCATTER® Oilfield Hot Oiler Hose, Series 7301
Parker's Series 7301 Wildcatter Hot Oiler Hose is compatible with hot oil and provides excellent high pressure service across multiple drill site applications. The hose construction resists crushing and kinking for durability, and features a cover that is resistant to abrasion, oil and weathering to provide maximum performance. Series 7301 is qualified with permanent crimp couplings for a safe and secure connection and provides robust service life in challenging applications.
Markets:
• Construction
• General industrial
• Oil & Gas
Features/Benefits:
• Tube: Black chloroprene for exceptional hot oil resistance to 275°F.
• Reinforcement: Multiple wire braids for extreme strength and durability.
• Cover: Black chlorobutyl for resistance to abrasion, heat, oil and weathering.
• Couplings: Qualified with steel crimp couplings for a durable, safe and secure connection.
Applications:
-media
• Hot asphalt
• Hot glue
• Hot oil
• Hot tar
• Hot wax
-usage
• Circulation and clean-out
• Casings, piping and tubing
Safety/Technical:
• Design Factor: 3:1
• Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to NAHAD Industrial Hose Assembly Guidelines -
WILDCATTER® Oilfield Slim Hole Rotary Drill Hose, Series 7234
Parker's Series 7234 Wildcatter Oilfield Slim Hole Rotary Drill Hose is compatible with many oilfield media and provides excellent high pressure service across multiple drill site applications. The hose incorporates high pressure and high temperature capabilities and features a cover that is resistant to abrasion, oil and weathering to provide maximum performance. Series 7234 is qualified with permanent crimp couplings for a safe and secure connection and provides robust service life in challenging applications.
Markets:
• General industrial
• Oil & Gas
Features/Benefits:
• Tube: Black synthetic rubber for exceptional abrasion and oil resistance to 250°F.
• Reinforcement: Multiple wire plies for extreme strength and durability.
• Cover: Black synthetic rubber for resistance to abrasion, oil and weathering.
• Couplings: Qualified with steel crimp couplings for a durable, safe and secure connection.
Applications:
- media
• Cement solutions
• Mild chemicals
• Oil
• Slurries
- usage
• Portable drilling units
• Reverse circulation systems
• Seismic equipment
• Workover rigs
Safety/Technical:
• Design Factor: 2.5: and 3.3:1
• Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to NAHAD Industrial Hose Assembly Guidelines -
Reinforced Conduit Hose, Series 7337M
Parker's Series 7337M Reinforced Conduit Hose provides excellent service as heavy duty, rugged, abrasion resistant protection for cable, hose and tubing. The thick hose wall is extremely durable, and flame retardant to protect operators from fire hazards. The smooth cover enables easy routing, and the hose is available on reels containing long continuous lengths for maximum application and inventory versatility.
Markets:
• General Industrial
• Underground Mining
Features/Benefits:
• Tube: Black synthetic rubber for durable service to 180°F.
• Reinforcement: Multiple textile plies for strength and durability.
• Cover: Black synthetic rubber for resistance to abrasion, cuts, gouging and scuffs.
Applications:
-usage
• Conduit
• Protection for cable, hose, tubing, wiring
Industry Standards:
• MSHA -
SUPER-FLEX® Large Diameter Corrugated Vacuum Hose, Series 7363
Parker's Series 7363 Concrete Placement Hose provides excellent heavy duty service as a delivery/placement connection across multiple medium pressure transfer and applications. The thick rubber tube provides additional resistance to abrasive materials going through the hose, and the corrugated cover provides kink resistance for unimpeded flow, additional flexibility for easy handling and resistance to abrasion and weathering for maximum performance.
Markets:
• Construction
• General Industrial
• Local & Municipal Governments
Features/Benefits:
• Tube: Black 3/16” thick natural rubber/SBR for abrasion resistance to 160°F.
• Reinforcement: Multiple textile plies for strength and durability, and a wire helix for full suction capability and a path to conduct a static charge to ground.
• Cover: Black corrugated rubber/SBR for resistance to abrasion, cuts, gouging, scuffs and weathering.
• Lengths: Available in optional 200-foot lengths for maximum efficiency of inventory.
Applications:
- media
• Abrasive materials
• Debris
• Water
- usage
• Bulk loading/unloading
• Construction sites
• Rail yards
Safety/Technical:
• Design Factor: 3:1
• Click here to access CrimpSource® for current crimp specifications. -
Large Diameter Custom Made Heavy Duty Oilfield Mud Suction...
Parker's Series TKW160 Large Diameter Custom Made Heavy Duty Oilfield Mud Suction Hose provides excellent heavy duty service across multiple oilfield bulk transfer applications. The thick rubber tube provides additional resistance to abrasives, drilling mud and other typical oilfield materials going through the hose and the cover provides resistance to abrasion and weathering for maximum versatility and performance. The basic hose construction may be modified to customer-specified requirements, including brand, length pattern and built-in coupling configurations. Parker will quickly design and build a custom made product to satisfy specific application requirements and will drop-ship in protective packaging, eliminating the cost of additional handling and the need to compromise on hose performance.
Markets:
• Construction
• General Industrial
• Oilfield
Features/Benefits:
• Tube: Black nitrile for abrasion and oil resistance to 180°F.
• Reinforcement: Multiple textile plies for strength and durability, and a wire helix for full suction capability and a path to conduct a static charge to ground.
• Cover: Black synthetic rubber for resistance to abrasion, cuts, gouging, scuffs and weathering.
• Couplings: Per customer requirements
Applications:
- media
• Drilling mud
• Mild chemicals
• Oil
• Oily water
• Petroleum waste
• Sewerage
• Slurries
- usage
• Construction sites
• Drill sites
• Surface mines
Safety/Technical:
Custom Made Hose Engineering Hot Lines
- Eastern USA
1-800-438-2004
7:00 am—4:30 pm ET
- Western USA
1-800-783-3922
10:00 am—7:00 pm ET -
Oxygen Charging Hose, Series 7293
Parker's Series 7293 Oxygen Charging Hose provides excellent high service across multiple industrial oxygen lancing and scarfing applications in foundry and steel mill applications. The hose is flame and oil resistant and the ends are capped at the factory to prevent contamination for operator safety. The green cover provides easy identification and resists abrasion and heat for maximum performance.
Markets:
• General Industrial
Features/Benefits:
• Tube: Black chloroprene for oil and flame resistance to 212°F.
• Reinforcement: Multiple textile plies for flexibility and strength.
• Cover: Green chloroprene for resistance to abrasion, flame and oil.
• Couplings: Qualified with steel crimp couplings for a durable, safe and secure connection.
• Lengths: Available in optional 200-foot continuous lengths for maximum versatility.
Applications:
-media
• Industrial oxygen
-usage
• Lancing
• Oxygen injection
• Scarfing
• Foundries
• Glassworks
• Steel mills
Safety/Technical:
• Design Factor: 4:1
Warnings:
• Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to NAHAD Industrial Hose Assembly Guidelines. -
WILDCATTER® Heavy Duty Dry Cement Material Handling Hose,...
Parker's Series SS247 Wildcatter Heavy Duty Dry Cement Material Handling Hose provides excellent service across multiple low pressure bulk transfer applications. The thick rubber tube provides additional resistance to dry cement and other abrasive materials going through the hose, and dissipates static electrical charge for operator safety. The cover provides resistance to abrasion and weathering for maximum performance.Markets:• Construction• General Industrial• OilfieldFeatures/Benefits:• Tube: Black 1/4” thick SBR for excellent abrasion resistance to 180°F.• Reinforcement: Multiple textile plies for strength and durability.• Cover: Black SBR for resistance to abrasion, cuts, gouging, scuffs and weathering resistance.Applications:- media• Abrasive materials• Dry cement• Pebble lime• Powders• Sand• Silica- usage• Bulk loading/unloading• Construction sites• Drill site mixing/supply• Highway maintenance• In-plant transferSafety/Technical:• Design Factor: 3:1Warnings:• Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to NAHAD Industrial Hose Assembly Guidelines. -
WILDCATTER® Dry Cement Material Handling Hose, Series SS135
Parker's Series SS135 Wildcatter Dry Cement Material Handling Hose provides excellent service across multiple low pressure bulk transfer applications. The thick rubber tube provides additional resistance to dry cement and other abrasive materials going through the hose, and dissipates static electrical charge for operator safety. The cover provides resistance to abrasion and weathering for maximum performance.
Markets:
• Construction
• General Industrial
• Oilfield
Features/Benefits:
• Tube: Black 1/8” thick SBR for excellent abrasion resistance to 180°F.
• Reinforcement: Multiple textile plies for strength and durability.
• Cover: Black SBR for resistance to abrasion, cuts, gouging, scuffs and weathering resistance.
Applications:
- media
• Abrasive materials
• Dry cement
• Powders
- usage
• Bulk loading/unloading
• Construction sites
• Drill site mixing/supply
• Highway maintenance
• In-plant transfer
Warnings:
• Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to NAHAD Industrial Hose Assembly Guidelines. -
DAY-LITE® Corrugated Material Handling Suction & Vacuum Hose,...
Parker's Series 8341 Day-Lite Corrugated Material Handling Suction & Vacuum Hose provides excellent heavy duty service across multiple low pressure transfer and applications. The thick rubber tube provides additional resistance to abrasive materials going through the hose, and dissipates static electrical charge for operator safety. The lightweight corrugated cover provides kink resistance for unimpeded flow, additional flexibility for easy handling and resistance to abrasion and weathering for maximum performance.
Markets:
• Construction
• General Industrial
• Local & Municipal Governments
Features/Benefits:
• Tube: Black natural rubber/SBR for abrasion resistance to 180°F.
• Reinforcement: Multiple textile plies for strength and durability, and a wire helix for full suction capability and a path to conduct a static charge to ground.
• Cover: Black corrugated rubber/SBR for resistance to abrasion, cuts, gouging, scuffs and weathering.
• Lengths: Available in optional 200-foot lengths for maximum versatility in application and efficiency of inventory.
Applications:
- media
• Abrasive materials
• Debris
• Sewerage
• Water
- usage
• Bulk loading/unloading
• Construction sites
• Rail yards
• Sewer cleaning
Safety/Technical:
• Design Factor: 3:1
Warnings:
• Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to NAHAD Industrial Hose Assembly Guidelines. -
Large Diameter Custom Made Heavy Duty Dredge/Sand Suction...
Parker's Series EW709 Large Diameter Custom Made Heavy Duty Dredge/Sand Suction Hose provides superior heavy duty service as a flexible connection across multiple high pressure dredging and bulk transfer and applications. The thick rubber tube provides superior resistance to abrasive materials going through the hose and the cover provides resistance to abrasion and weathering for maximum performance. The basic hose construction may be modified to customer-specified requirements, including brand, length pattern and built-in coupling configurations. Parker will quickly design and build a custom made product to satisfy specific application requirements and will drop-ship in protective packaging, eliminating the cost of additional handling and the need to compromise on hose performance.
Markets:
• Construction
• Dredging
• General Industrial
Features/Benefits:
• Tube: Black ½” thick natural rubber for superior abrasion resistance to 150°F.
• Reinforcement: Multiple textile plies for strength and durability, and a wire helix for full suction capability and a path to conduct a static charge to ground.
• Cover: Black SBR for resistance to abrasion, cuts, gouging, scuffs and weathering.
• Couplings: Per customer requirements
Applications:
- media
• Abrasive materials
• Debris
• Gravel
• Sand
• Slurries
- usage
• Bays
• Beaches
• Harbors
• Lakes
• Ocean fronts
• Ports
• Rivers
• Dredging equipment
• Surface mines/quarries
Safety/Technical:
• Design Factor: 4:1 -
Large Diameter Custom Made Heavy Duty Material Handling...
Parker's Series EWC334 Large Diameter Custom Made Heavy Duty Material Handling Corrugated Suction Hose provides heavy duty service as a flexible connection across multiple low pressure bulk transfer applications. The thick rubber tube provides additional resistance to abrasive materials going through the hose, and the corrugated cover provides abrasion resistance, weathering resistance and additional flexibility for easy handling. The basic hose construction may be modified to customer-specified requirements, including brand, length pattern and built-in coupling configurations. Parker will quickly design and build a custom made product to satisfy specific application requirements and will drop-ship in protective packaging, eliminating the cost of additional handling and the need to compromise on hose performance.
Markets:
• Construction
• General Industrial
Features/Benefits:
• Tube: Black 1/8” thick natural rubber for abrasion resistance to 150°F.
• Reinforcement: Multiple textile plies for strength and durability, and a wire helix for full suction capability and a path to conduct a static charge to ground.
• Cover: Black corrugated SBR for resistance to abrasion, cuts, gouging, scuffs and weathering.
• Couplings: Per customer requirements
Applications:
- media
• Abrasive materials
• Debris
• Gravel
• Sand
• Slurries
- usage
• Construction sites
• Dredging operations
• Surface mines
Safety/Technical:
Custom Made Hose Engineering Hot Lines
- Eastern USA
1-800-438-2004
7:00 am—4:30 pm ET
- Western USA
1-800-783-3922
10:00 am—7:00 pm ET -
Large Diameter Custom Made Heavy Duty Dredge Sleeve, Series ES907
Parker's Series ES907 Large Diameter Custom Made Heavy Duty Dredge Sleeve provides excellent heavy duty service as a flexible connection between floating pipes in high pressure dredging applications. The thick rubber tube provides additional resistance to abrasive materials going through the hose and the cover provides resistance to abrasion and weathering for maximum performance. The basic hose construction may be modified to customer-specified requirements, including length pattern and plain or enlarged ends. Parker will quickly design and build a custom made product to satisfy specific application requirements and will drop-ship in protective packaging, eliminating the cost of additional handling and the need to compromise on hose performance.
Markets:
• Construction
• Dredging
• General Industrial
Features/Benefits:
• Tube: Black 3/8” thick natural rubber for exceptional abrasion resistance to 150°F.
• Reinforcement: Multiple textile plies for strength and durability.
• Cover: Black SBR for resistance to abrasion, cuts, gouging, scuffs and weathering resistance.
Applications:
- media
• Abrasive materials
• Debris
• Gravel
• Sand
• Slurries
- usage
• Bays
• Beaches
• Harbors
• Lakes
• Ocean fronts
• Ports
• Rivers
• Dredging equipment
• Surface mines/quarries
Safety/Technical:
Custom Made Hose Engineering Hot Lines
- Eastern USA
1-800-438-2004
7:00 am—4:30 pm ET
- Western USA
1-800-783-3922
10:00 am—7:00 pm ET -
Heavy Duty Sand Recovery/Vacuum Hose, Series SW409
Parker's Series SW409 Heavy Duty Sand Recovery/Vacuum Hose provides superior service across multiple high pressure bulk transfer applications. The thick rubber tube provides additional resistance to sand and other severely abrasive materials going through the hose, and dissipates static electrical charge for operator safety. The cover provides resistance to abrasion and weathering for maximum performance.
Markets:
• Construction
• General Industrial
• Surface Mining
Features/Benefits:
• Tube: Tan 1/4” thick natural rubber for superior abrasion resistance to 150°F.
• Reinforcement: Multiple textile plies for strength and durability, and a wire helix for crush resistance and kink resistance, full suction capability and a path to conduct a static charge to ground.
• Cover: Black SBR for resistance to abrasion, cuts, gouging, scuffs and weathering resistance.
Applications:
- media
• Abrasive materials
• Debris
• Sand
- usage
• Bulk loading/unloading
• Construction sites
• Highway maintenance
• In-plant transfer
• On-site sand clean-up/recovery
Warnings:
• Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to NAHAD Industrial Hose Assembly Guidelines. -
Large Diameter Custom Made Heavy Duty Dredge Sleeve, Series ES908
Parker's Series ES908 Large Diameter Custom Made Heavy Duty Dredge Sleeve provides superior heavy duty service as a flexible connection between floating pipes in high pressure dredging applications. The thick rubber tube provides additional resistance to abrasive materials going through the hose and the cover provides resistance to abrasion and weathering for maximum performance. The basic hose construction may be modified to customer-specified requirements, including length pattern and plain or enlarged ends. Parker will quickly design and build a custom made product to satisfy specific application requirements and will drop-ship in protective packaging, eliminating the cost of additional handling and the need to compromise on hose performance.
Markets:
• Construction
• Dredging
• General Industrial
Features/Benefits:
• Tube: Black 1/2” thick natural rubber for exceptional abrasion resistance to 150°F.
• Reinforcement: Multiple textile plies for strength and durability.
• Cover: Black SBR for resistance to abrasion, cuts, gouging, scuffs and weathering resistance.
Applications:
- media
• Abrasive materials
• Debris
• Gravel
• Sand
• Slurries
- usage
• Bays
• Beaches
• Harbors
• Lakes
• Ocean fronts
• Ports
• Rivers
• Dredging equipment
• Surface mines/quarries
Safety/Technical:
Custom Made Hose Engineering Hot Lines
- Eastern USA
1-800-438-2004
7:00 am—4:30 pm ET
- Western USA
1-800-783-3922
10:00 am—7:00 pm ET -
Elephant Trunk Large Diameter Custom Made Material Handling...
Parker's Series ES937 Elephant Trunk Large Diameter Custom Made Material Handling Hose provides excellent service across multiple light duty, gravity drop bulk transfer applications. The thick rubber tube provides additional resistance to abrasive materials going through the hose and the cover provides resistance to abrasion and weathering for maximum performance. The basic hose construction may be modified to customer-specified requirements, including brand, length pattern and plain or enlarged ends. Parker will quickly design and build a custom made product to satisfy specific application requirements and will drop-ship in protective packaging, eliminating the cost of additional handling and the need to compromise on hose performance.
Markets:
• Construction
• General Industrial
Features/Benefits:
• Tube: Black 1/8” thick natural rubber for exceptional abrasion resistance to 180°F.
• Reinforcement: Multiple textile plies for strength and durability.
• Cover: Black SBR for resistance to abrasion, cuts, gouging, scuffs and weathering resistance.
Applications:
• Light abrasive materials
• Powders
Safety/Technical:
Custom Made Hose Engineering Hot Lines
- Eastern USA
1-800-438-2004
7:00 am—4:30 pm ET
- Western USA
1-800-783-3922
10:00 am—7:00 pm ET -
EXACTA PIPE™ Large Diameter Custom Made Heavy Duty Material...
Parker's Series EW336 Exacta Pipe Large Diameter Custom Made Heavy Duty Material Handling Suction Hose provides excellent heavy duty service across multiple bulk transfer applications. The thick rubber tube provides additional resistance to abrasive materials going through the hose and the cover provides resistance to abrasion and weathering for maximum performance. The basic hose construction may be modified to customer-specified requirements, including brand, length pattern and built-in coupling configurations. Parker will quickly design and build a custom made product to satisfy specific application requirements and will drop-ship in protective packaging, eliminating the cost of additional handling and the need to compromise on hose performance.
Markets:
• Construction
• General Industrial
Features/Benefits:
• Tube: Black ¼” thick natural rubber for exceptional abrasion resistance to 150°F.
• Reinforcement: Multiple textile plies for strength and durability, and a wire helix for full suction capability and a path to conduct a static charge to ground.
• Cover: Black SBR for resistance to abrasion, cuts, gouging, scuffs and weathering.
• Couplings: Per customer requirements
Applications:
- media
• Abrasive materials
• Debris
• Gravel
• Sand
• Slurries
- usage
• Construction sites
• Surface mines
Safety/Technical:
Custom Made Hose Engineering Hot Lines
- Eastern USA
1-800-438-2004
7:00 am—4:30 pm ET
- Western USA
1-800-783-3922
10:00 am—7:00 pm ET -
Large Diameter Custom Made Heavy Duty Petroleum Service...
Parker's Series EWC439 Large Diameter Custom Made Heavy Duty Petroleum Service Corrugated Dock Hose provides excellent medium pressure, heavy duty service across multiple bulk loading/unloading applications, and the corrugated cover provides flexibility for easy handling. The basic hose construction may be modified to customer-specified requirements, including brand, length pattern and built-in coupling configurations. Parker will quickly design and build a custom made product to satisfy specific application requirements and will drop-ship in protective packaging, eliminating the cost of additional handling and the need to compromise on hose performance.
Markets:
• General Industrial
• Marine
Features/Benefits:
• Tube: Black nitrile for exceptional oil resistance to 180°F.
• Reinforcement: Multiple textile plies for strength and durability, and a wire helix for full suction capability and a path to conduct a static charge to ground.
• Cover: Black corrugated synthetic rubber for abrasion and weathering resistance and flexibility.
• Couplings: Per customer requirements
Applications:
- media
• Fuel to 50% aromatic content
• Oil
- usage
• Barges
• Bulk depots/terminals
• Docks
• Marine vessels
• Storage tanks
Industry Standards:
• USCG
Safety/Technical:
Custom Made Hose Engineering Hot Lines
- Eastern USA
1-800-438-2004
7:00 am—4:30 pm ET
- Western USA
1-800-783-3922
10:00 am—7:00 pm ET -
Large Diameter Custom Made Heavy Duty Corrugated Vacuum Hose,...
Parker's Series EWC789 Large Diameter Custom Made Heavy Duty Corrugated Vacuum Hose provides heavy duty service as a flexible connection on mobile vacuum trucks in sewer cleaning applications and across multiple medium pressure bulk transfer applications. The thick rubber tube provides additional resistance to abrasive materials going through the hose, and the corrugated cover provides abrasion resistance, weathering resistance and additional flexibility for easy handling. The basic hose construction may be modified to customer-specified requirements, including brand, length pattern and built-in coupling configurations. Parker will quickly design and build a custom made product to satisfy specific application requirements and will drop-ship in protective packaging, eliminating the cost of additional handling and the need to compromise on hose performance.
Markets:
• Construction
• General Industrial
• Local & Municipal Governments
Features/Benefits:
• Tube: Black 1/4” thick SBR for economical abrasion resistance to 180°F.
• Reinforcement: Multiple textile plies for strength and durability, and a dual wire helix for full suction capability and a path to conduct a static charge to ground.
• Cover: Black corrugated SBR for resistance to abrasion, cuts, gouging, scuffs and weathering.
• Couplings: Per customer requirements
Applications:
- media
• Abrasive materials
• Debris
• Gravel
• Sand
• Slurries
- usage
• Commercial & municipal vacuum trucks
• Construction sites
• Street maintenance
Safety/Technical:
• Design Factor: 4:1 -
Large Diameter Custom Made Heavy Duty Material Handling...
Parker's Series EWC777 Large Diameter Custom Made Heavy Duty Material Handling Corrugated Suction Hose provides heavy duty service as a flexible connection across multiple medium pressure bulk transfer applications. The thick rubber tube provides additional resistance to abrasive materials going through the hose, and the corrugated cover provides abrasion resistance, weathering resistance and additional flexibility for easy handling. The basic hose construction may be modified to customer-specified requirements, including brand, length pattern and built-in coupling configurations. Parker will quickly design and build a custom made product to satisfy specific application requirements and will drop-ship in protective packaging, eliminating the cost of additional handling and the need to compromise on hose performance.
Markets:
• Construction
• General Industrial
Features/Benefits:
• Tube: Black 5/16” thick natural rubber for exceptional abrasion resistance to 150°F.
• Reinforcement: Multiple textile plies for strength and durability, and a wire helix for full suction capability and a path to conduct a static charge to ground.
• Cover: Black corrugated SBR for resistance to abrasion, cuts, gouging, scuffs and weathering.
• Couplings: Per customer requirements
Applications:
- media
• Abrasive materials
• Debris
• Gravel
• Sand
• Slurries
- usage
• Construction sites
• Dredging operations
• Surface mines
Safety/Technical:
Custom Made Hose Engineering Hot Lines
- Eastern USA
1-800-438-2004
7:00 am—4:30 pm ET
- Western USA -
Large Diameter Custom Made Standard Duty Corrugated Vacuum...
Parker's Series EWC888 Large Diameter Custom Made Standard Duty Corrugated Vacuum Hose provides low pressure service as a flexible connection on mobile vacuum trucks and across multiple medium pressure bulk transfer applications. The thick rubber tube provides additional resistance to abrasive materials going through the hose, and the corrugated cover provides abrasion resistance, weathering resistance and additional flexibility for easy handling. The basic hose construction may be modified to customer-specified requirements, including brand, length pattern and built-in coupling configurations. Parker will quickly design and build a custom made product to satisfy specific application requirements and will drop-ship in protective packaging, eliminating the cost of additional handling and the need to compromise on hose performance.
Markets:
• Construction
• General Industrial
• Local & Municipal Governments
Features/Benefits:
• Tube: Black 1/8” thick natural rubber for abrasion resistance to 150°F.
• Reinforcement: Multiple textile plies for strength and durability, and a dual wire helix for full suction capability and a path to conduct a static charge to ground.
• Cover: Black corrugated SBR for resistance to abrasion, cuts, gouging, scuffs and weathering.
• Couplings: Per customer requirements
Applications:
- media
• Abrasive materials
• Debris
• Gravel
• Sand
• Slurries
- usage
• Commercial & municipal vacuum trucks
• Construction sites
• Street maintenance
Safety/Technical:
• Design Factor: 4:1 -
Grade R Single Line Fuel Gas Welding Hose, Series 7120
Parker's Series 7120 Grade R Single Line Fuel Gas Welding Hose provides excellent service across a wide variety of industrial and commercial applications. The hose is available in long continuous lengths for efficient inventory management and maximum utility at cramped or hard to reach job sites where the gas sources are separated and a twin line is not practical. The red cover is ribbed for easy visual and tactile identification. Series 7120 is a versatile hose for many common acetylene-based industrial welding applications.
Markets:
• Construction
• General Industrial
• Oil & Gas
Features/Benefits:
• Tube: Black EPDM for acetylene compatibility.
• Tube: Non-blooming to minimize the migration of combustible plasticizers and waxes to the surface of the hoses.
• Reinforcement: Multiple textile plies for strength and kink resistance.
• Cover: Red EPDM for abrasion and weathering resistance.
Applications:
- media
• Fuel gas (acetylene only)
- usage
• Bending
• Brazing
• Cutting
• Fabricating
• Gouging
• Joining
• Piercing
• Preheating
• Post-heating
• Severing
• Soldering
• Straightening
• Surfacing
• Trimming
- setting
• Auto body shops
• Craft shops
• Garages
• Mines
• Oilfield
• Plumber shops
• Railyards
• Salvage
• Scrapyards
• Shipyards
• Steel mills
Industry Standards:
• ARPM IP-7
Safety/Technical:
• Grade R is also suitable for use with inert gas.
• Do not use Grade R with any fuel gas other than acetylene. -
Sand Blast Hose, Series 7244
Parker's Series 7244 Sand Blast Hose provides excellent heavy duty service across multiple medium pressure blasting and transfer applications. The thick rubber tube provides additional resistance to sand and other abrasive materials going through the hose, and dissipates static electrical charge for operator safety. The thick hose wall provides kink resistance for unimpeded flow, and resistance to abrasion and weathering for maximum performance.
Markets:
• Construction
• General Industrial
Features/Benefits:
• Tube: Black natural rubber for superior abrasion resistance to 180°F.
• Reinforcement: Multiple textile plies for strength and durability
• Cover: Black synthetic rubber for resistance to abrasion, cuts, gouging, scuffs and weathering.
Applications:
- media
• Abrasive materials
• Sand
- usage
• Cleaning
• Conditioning
• Stripping
• Construction sites
• Highway maintenance
• Shipyards
Safety/Technical:
• Design Factor: 3:1 -
Grade R Single Line Oxygen Welding Hose, Series 7121
Parker's Series 7121 Grade R Single Line Oxygen Welding Hose provides excellent service across a wide variety of industrial and commercial applications. The hose is available in long continuous lengths for efficient inventory management and maximum utility at cramped or hard to reach job sites where the gas sources are separated and a twin line is not practical. The green cover is ribbed for easy visual and tactile identification. Series 7121 is a versatile hose for many common industrial welding applications.
Markets:
• Construction
• General Industrial
• Oil & Gas
Features/Benefits:
• Tube: Black EPDM for oxygen compatibility.
• Tube: Non-blooming to minimize the migration of combustible plasticizers and waxes to the surface of the hoses.
• Reinforcement: Multiple textile plies for strength and kink resistance.
• Cover: Green EPDM for abrasion and weathering resistance.
Applications:
- media• Oxygen- usage• Bending• Brazing• Cutting• Fabricating• Gouging• Joining• Piercing• Preheating• Post-heating• Severing• Soldering• Straightening• Surfacing• Trimming- setting• Auto body shops• Craft shops• Garages• Mines• Oilfield• Plumber shops• Railyards• Salvage• Scrapyards• Shipyards• Steel mills
Industry Standards:
• ARPM IP-7
Safety/Technical:
• Grade R is also suitable for use with inert gas. -
Fast Response Constant Pressure Hose – 575X/575XN Series
Parflex 575X Fast Response Constant Pressure Hoses are designed for applications that involve offshore drilling and require fast and accurate response time. The 575X is capable of operating at a 5,000 psi constant pressure. It is MSHA accepted and exhibits rapid response even over long lengths, making it the optimal solution for marine and oilfield service market applications.
Markets:
• Oil & Gas
• Marine
• Industrial
Features/Benefits:
• Fast response even over longer lengths
• Reduced weight without compromising performance
• Resistant to pin hole leaks
•5000 psi constant working pressure
Applications:
• Applications requiring fast and accurate response time
• Oilfield service
• Offshore drilling
Certifications/Compliance:
• MSHA Accepted
Technical Specifications:
• Tube: Nylon
• Reinforcement: Fiber
• Cover: Black polyurethane except 1/2" size. 575XN-8 has a Black Nylon cover. Non-perforated cover.
• Working pressures rated at 73°F (23°C)
• Hose I.D. is nominal
• Hose O.D. is maximum -
Medium Pressure Parkrimp No-Skive Compact Hose 493
Parker's Medium Pressure No-Skive Compact hose 493 with one high tensile steel wire braid is especially designed for high pressure water cleaners and can be used for constant water temperature up to 120 °C. Using the matched hose and fitting system, this hose will guarantee a safe, high quality connection with a long service life.
Markets:
• Food Industry
• Construction Equipment
• Agriculture
• Transportation
Features/Benefits:
• Matched hose and fitting system guarantees an approved and safe combination at the highest quality and safety, combined with the longest service life of the final product to the end-users.
• Safe - the permanent embossed layline marking guarantees the right usage and remains visible even under hard working conditions.
• Extremely flexible for an easy handling and a long service life
• High temperature resistance - constant water temperatures up to 120 °C.
• High abrasion resistance - no color marking on the ground floor.
• Available in blue and black - the blue colored hose is mainly used where hygiene is of upmost importance whereas the black covered hose is especially designed for outdoor use.
Applications:
• Food preparation
• Sanitary and hygiene areas
• Trucks and passenger cars
• Excavators
• Agricultural machines
• Facades -
Medium Pressure Parkrimp No-Skive Hose 463
Parker's Medium Pressure No-Skive Compact hose 463 with two high tensile steel wire braids is especially designed for high pressure water cleaners and can be used for constant water temperature up to 120 °C. Using the matched hose and fitting system, this hose will guarantee a safe, high quality connection with a long service life.
Markets:
• Food Industry
• Construction Equipment
• Agriculture
• Transportation
Features/Benefits
• Matched hose and fitting system guarantees an approved and safe combination at the highest quality and safety, combined with the longest service life of the final product to the end-users.
• Safe - the permanent embossed layline marking guarantees the right usage and remains visible even under hard working conditions.
• Extremely flexible for an easy handling and a long service life
• High temperature resistance - constant water temperatures up to 120 °C.
• High abrasion resistance - no color marking on the ground floor.
• Available in blue and black - the blue colored hose is mainly used where hygiene is of umpost importance whereas the black covered hose is especially designed for outdoor use.
Applications:
• Food preparation
• Sanitary and hygiene areas
• Trucks and passenger cars
• Excavators
• Agricultural machines
• Facades
Parker's Medium Pressure hose 463 is compatible with the Parker Parkrimp medium pressure fitting series 46. -
Kompaktowe węże średniociśnieniowe typu No-Skive Elite — EN...
Kompaktowy wąż średniociśnieniowy Elite typu No-Skive 461LT firmy Parker, zgodny z normą EN 857 2SC i charakteryzujący się cienką powłoką oraz doskonałą odpornością na ozon, jest przeznaczony do zastosowań mobilnych w niskich temperaturach sięgających -50°C.
Rynki:
• Mobilny
Cechy/korzyści:
• System dopasowanych węży i łączników gwarantuje sprawdzoną
i bezpieczną kombinację oraz najwyższą jakość i bezpieczeństwo
połączoną z najdłuższym okresem eksploatacji produktu końcowego przez
użytkowników końcowych.
• Materiały wysokiej jakości pozwalają na uzyskanie cienkiej powłoki, użytkowanie
w środowisku o niskiej temperaturze, mniejszą masę i długi okres eksploatacji.
• Duża elastyczność ułatwia instalację.
• Powłoki o wysokiej odporności na ozon zwiększają odporność na warunki
atmosferyczne i starzenie.
• Kompletna technologia montażu No-Skive w całej gamie
węży średniociśnieniowych zapewnia prostszy, szybszy i bezpieczniejszy
montaż węży.
Zastosowania:
• Wszystkie mobilne zastosowania średniociśnieniowe
• Maszyny rolnicze i leśne
• Maszyny do transportu materiałów w magazynach-chłodniach
Węże średniociśnieniowe 461LT firmy Parker są zgodne z łącznikami średniociśnieniowymi Parker Parkrimp serii 46 i 48. -
High-Pressure No-Skive Compact Hoses - 3 wire braid with 4SP...
Parker's High Pressure Parkrimp No-Skive hydraulic hose 371LT with No-Skive hose construction and excellent ozone resistance has been designed for low temperature mobile applications up to -50 °C.
Markets:
• Mobile
Features/Benefits:
• Matched hose and fitting system guarantees an approved and safe combination and the highest quality and safety
combined with the longest service life of the final product to the end-users.
• High quality compounds allows usage in low temperature environment, less weight, long service life.
• High flexibility for easier installation
• High ozone-resistant cover compounds extending weathering and aging resistance.
• Complete No-Skive fitting technology across the full range of medium pressure hoses providing simpler, quicker and
safer hose assembly.
Applications:
• All mobile applications in low temperature environments such as forestry machines, refrigerated warehouses.
Parker's High Pressures Hose 371LT is compatible with the Parker Parkrimp high pressure fitting Series 70. -
Wysokociśnieniowe węże kompaktowe typu No-Skive Parkrimp 372 —...
Kompaktowe wysokociśnieniowe węże typu No-Skive 372, 372RH oraz 372TC z trzema oplotami z drutu firmy Parker cechują się kompaktową konstrukcją typu No-Skive i ciśnieniem roboczym klasy 4SP. Wyróżniają się rozszerzoną kompatybilnością z płynami oraz idealnie nadają się do ogólnych wysokociśnieniowych zastosowań hydraulicznych z małym promieniem gięcia. Uzupełnieniem gamy węży wysokociśnieniowych firmy Parker jest kompletna oferta zgodnych łączników typu No-Skive ze stali i stali nierdzewnej.
Rynki:
• Urządzenia mobilne
• Transport
Cechy i korzyści
• System dopasowanych węży i łączników gwarantuje sprawdzoną i bezpieczną kombinację, najwyższą jakość i bezpieczeństwo
oraz najdłuższy okres eksploatacji ostatecznego produktu przez użytkowników końcowych.
• Wąż typu 372RH z powłoką ogniochronną jest zatwierdzony do zastosowań kolejowych zgodnie z normami EN 45545 oraz ISO 15540, co
w połączeniu z małym promieniem gięcia sprawia, że jest to idealny wąż do układów hydraulicznych o wysokim ciśnieniu
dynamicznym i statycznym.
• Wąż 372TC z wytrzymałą powłoką (TC) odporną na przetarcie i atestem MSHA jest preferowanym wężem do ogólnych
wysokociśnieniowych zastosowań hydraulicznych na rynku urządzeń mobilnych.
• Wytrzymała powłoka (TC) charakteryzuje się 80-krotnie większą odpornością na przetarcie niż węże ze standardową gumową powłoką.
• Wąż 372TC nadaje się także do tymczasowego, często kontrolowanego zanurzenia w oleju mineralnym o temperaturze do 70°C.
• Kompletna technologia montażu No-Skive w całej gamie węży średniociśnieniowych zapewnia prostszy, szybszy i
bezpieczniejszy montaż węży.
Zastosowania:
• Ogólne wysokociśnieniowe zastosowania hydrauliczne w urządzeniach mobilnych o małych promieniach gięcia
• Układy hydrauliczne o wysokim ciśnieniu dynamicznym i statycznym
Węże wysokociśnieniowe 372, 372RH oraz 372TC firmy Parker są zgodne z łącznikami średniociśnieniowymi Parker Parkrimp serii 70. -
Węże średniociśnieniowe Elite typu No-Skive — ISO 11237 — SAE...
Kompaktowe węże średniociśnieniowe typu No-Skive Parker 441 i 441RH mają jeden oplot z drutu o konstrukcji typu No-Skive o wydajności dwóch oplotów, dlatego 441 jest idealnym rozwiązaniem do wielu zastosowań przemysłowych i mobilnych, np. w maszynach rolniczych lub obwodach wspomagania układów kierowniczych. Wąż 441RH z trudnopalną powłoką jest preferowanym typem do ogólnych średniociśnieniowych układów hydraulicznych i pneumatycznych oraz obiegów chłodzenia wodą.
Rynki:
• Przemysł
• Urządzenia mobilne
• Wytwarzanie energii elektrycznej
• Transport
Cechy i korzyści
• System dopasowanych węży i łączników gwarantuje sprawdzoną i bezpieczną kombinację, najwyższą jakość i bezpieczeństwo oraz najdłuższy okres eksploatacji ostatecznego produktu przez użytkowników końcowych.
• Wąż typu 441 jest zgodny z ISO 11237 typ R16 — SAE 100R16.
• Model 441RH ma trudnopalną powłokę (nie ma potrzeby stosowania dodatkowych ognioodpornych osłon) i jest zatwierdzony do zastosowań w przemyśle kolejowym zgodnie z EN45545 i ISO15540: HL2, dzięki czemu idealnie się nadaje do ogólnych średniociśnieniowych układów hydraulicznych i pneumatycznych oraz obiegów chłodzenia wodnego i olejowego.
• Kompletna technologia montażu No-Skive w całej gamie węży średniociśnieniowych zapewnia prostszy, szybszy i bezpieczniejszy montaż węży.
Zastosowania:
• Zastosowania przemysłowe i mobilne
• Maszyny rolnicze i leśne
• Obwody wspomagania układu kierowniczego
• Ogólne średniociśnieniowe układy hydrauliczne i pneumatyczne
• Obiegi chłodzenia wodnego i olejowego
• Obrabiarki i przemysł szklarski
Węże średniociśnieniowe 441 i 441RH firmy Parker są zgodne z łącznikami średniociśnieniowymi Parker Parkrimp serii 46 i 48 -
No-Skive Medium Pressure Hose 421SN, 421TC, 421RH , 421WC
Parker's Medium Pressure No-Skive hoses 421SN, 421TC, 421RH and 421WC offers an extended fluid compatibility and high flexibility with an easy installation due to the thin cover construction.
Markets:
• Mobile
• Industrial
• TransportationFeatures/Benefits:
• 421RH has a fire retardant cover and is Railway approved:
- European Standad EN 45545 HL2 for R22 (ingernal) and R23
(external)
• 421WC has a galvanized steel wire cover for metal and glass hot-spot resistance
• Nitrile inner tubes suitable for mineral and bio-degradable oils
• Using high quality compounds allows thin covers – small bend radii, less weight, long service life still assured
• High flexibility for easier installation and increased service life
• Parkrimp machines, portable or bench mount for easy assembly operation –hose assemblies meet CE directives
• Complete No-Skive fitting technology across the full range of medium pressure hoses providing simpler, quicker and safer hose assemblyApplications:
• Mobile and industrial medium pressure applications
• Construction
• Transportation
• Agriculture
• Forestry
• Materials Handling
• Automotive
• Machine Tool
• Injection Moulding
• Pulp and Paper -
Węże niskociśnieniowe typu No-Skive Parkrimp 2TE — EN 854 —...
Niskociśnieniowe węże typu No-Skive 681 i 681DB firmy Parker mają konstrukcję typu No-Skive z jedną warstwą oplotu z włókna. Wąż 681 to idealny wąż do wszystkich ogólnych niskociśnieniowych zastosowań hydraulicznych. Wąż 681DB z trudnopalną powłoką kauczukową jest preferowanym typem węża do ogólnych średniociśnieniowych zastosowań hydraulicznych w pojazdach szynowych. Uzupełnieniem gamy węży niskociśnieniowych firmy Parker jest kompletna oferta zgodnych łączników typu No-Skive ze stali i stali nierdzewnej.
Rynki:
• Przemysł
• Urządzenia mobilne
• Transport
Cechy i korzyści
• System dopasowanych węży i łączników gwarantuje sprawdzoną
i bezpieczną kombinację, najwyższą jakość i bezpieczeństwo,
a także najdłuższy okres eksploatacji ostatecznego produktu przez
użytkowników końcowych.
• Mały promień gięcia na potrzeby maszyn o kompaktowej konstrukcji.
• Wąż typu 681 jest zgodny z normą EN 854-2TE.
• Wąż typu 681DB ma opóźniającą palenie powłokę z kauczuku syntetycznego
i jest zatwierdzony do użytku w przemyśle kolejowym zgodnie z normą EN 45545 dla poziomu bezpieczeństwa HL2 i zastosowania R22
(wewnętrznego) oraz R23 (zewnętrznego), oraz normą ISO 15540 (wymagana
tuleja ognioodporna FS-F). Wąż typu 681DB to idealny wąż do wszystkich niskociśnieniowych zastosowań hydraulicznych
w pojazdach szynowych.
• Kompletna technologia montażu No-Skive w całej gamie
węży średniociśnieniowych zapewnia prostszy, szybszy i bezpieczniejszy
montaż węży.
Zastosowania:
• Przemysł
• Urządzenia mobilne
• Transport
Węże niskociśnieniowe 681 i 681DB firmy Parker są dostępne jako kompletne węże i są zgodne z dwuczęściowymi łącznikami do użytku wyłącznie z regulowanymi zakuwarkami (nypel serii 47 i płaszcz serii 10064). -
Średniociśnieniowe węże typu No-Skive Elite Parkrimp RemoFlex...
Węże średniociśnieniowe Elite RemoFlex typu No-Skive 412 i 412ST firmy Parker stanowią doskonałe rozwiązanie dla wymagającego rynku urządzeń mobilnych z przewodami próbnymi. Zaprojektowano je do ciśnienia roboczego 12,0 MPa, a dzięki użytym zaawansowanym materiałom i technologiom produkcji węże z tej serii mają bardzo mały promień gięcia umożliwiający projektowanie bardziej kompaktowych maszyn.
Rynki:
• Hydraulika w maszynach mobilnych
Cechy i korzyści
• System dopasowanych węży i łączników gwarantuje sprawdzoną i bezpieczną kombinację, najwyższą jakość i bezpieczeństwo,
a także najdłuższy okres eksploatacji ostatecznego produktu przez użytkowników końcowych
• Niezwykle małe promienie gięcia umożliwiające projektowanie bardziej kompaktowych maszyn
• Powłoki węży o wysokiej odporności na przetarcie przewyższają wymagania normy ISO 6945, wydłużając tym samym okres eksploatacji
• Bardzo wytrzymała powłoka (TC) charakteryzuje się 450-krotnie większą odpornością na przetarcie niż w przypadku węży ze standardową powłoką kauczukową
• Kompletna technologia montażu No-Skive w całej gamie węży średniociśnieniowych zapewnia prostszy, szybszy i
bezpieczniejszy montaż węży
• Uzupełnieniem gamy węży średniociśnieniowych firmy Parker jest kompletna oferta zgodnych łączników typu No-Skive ze stali
i stali nierdzewnej
Zastosowania
• Mobilne urządzenia hydrauliczne z przewodami próbnymi
Węże średniociśnieniowe 412 i 412ST firmy Parker są dostępne jako kompletne węże i są zgodne z dwuczęściowymi łącznikami do użytku wyłącznie z regulowanymi zakuwarkami (nypel serii 47 i płaszcz serii 10049). -
Automotive Air Braking Hose - Airbrake DIN 74310
Airbrake DIN 74310 hose is specifically engineered for air braking on board of vehicles in accordance to DIN 74310 specs. Our design guarantees the efficiency and reliability for such a delicate application where high performance and compliance to standards are important issues.
Markets
• Automotive
• Transportation
• Construction
Features/Benefits
• Recommended DIN 74304 and DIN 74325 fittings and DIN 3017 clamps to offer a complete and more performing solution
• Nitrosamine free compounds to protect the natural environment and the quality of life
• Design Factor 4:1 to enhance safety for operators and equipment
• Materials resistant to mechanical and environmental stress
Applications
• Air brake system
• On-road and off-road -
Automotive Air Braking Hose - Airbrake SAE J 1402-A
Airbrake SAE J 1402-A hose is specifically engineered for air braking on board of vehicles in accordance to SAE J 1402-A specs. Our design guarantees the efficiency and reliability for such a delicate application where high performance and compliance to standards are important issues.
Markets
• Automotive
• Transportation
• Construction
Features/Benefits
• Nitrosamine free compounds to protect the natural environment and the quality of life
• Design Factor 4:1 to enhance safety for operators and equipment
• Materials resistant to mechanical and environmental stress
Applications
• Air brake system
• On-road and off-road -
Gas Line - Autogene EN ISO 3821 NR/L - NB/L 20
Autogene EN ISO 3821 NR/L - NB/L 20 is a single line hose designed for delivery of welding and allied process gases with colored cover to match the EN specs indication: Red for Acetylene and Blue for Oxygen. Can be used either in industrial and domestic application and its high grade materials enable a safe use in all circumstances, furthermore it exceeds the stantard prescribed values on backfire test. The non-blooming tube minimizes the migration of combustible waxes or plasticizers to the surface of the rubber and the cover is resistant to abrasion, heat, sparks, ozone and mild chemicals. It is ideal for all those applications where the fuel gas and oxygen sources are separated and a twin hose is not practical.
Markets
• General Industrial
• Marine
• Processing
• Construction industry
Features/benefits
• Available in long continuous lengths providing maximun versatility
• Special cover compound does not burn when in contact with incandescent particles and hot surfaces
• Design Factor Value 3:1 enhances safety for operators and equipment
• Excellent flexibility for ease of handling
Applications
• Bending, brazing, cutting, fabricating, gouging, joining, piercing, pre-heating, post-heating, severing, soldering, straightening, surfacing, trimming
• Assembly and fabrication shops, construction, factories, foundries, mines, oil rigs, plumbing, rail yards, salvage, scrapyards, shipyards, steel mills -
Sewer cleaning hose - ESH
Parker Polyflex High Pressure ESH Hoses are developed for High and Ultra High Pressure applications. The excellent handling increases operator efficiency and long service life reduces costly down times. Superior safety standards are applied for the benefit of the operator.
Markets:
• Industrial cleaning
Features/Benefits:
• Prefabricated assemblies and long service life
• Available as bulk hose on a drum
• Excellent operator safety as a result of highest quality standards which are met
• Design factor : 2.5:1
Applications:
• Hydrodynamic cleaning sewers
• For working pressure up to 25 MPa (3625 psi)
Technical Specifications:
• Core tube: Polythylene compound, grey
• Pressure reinforcement: Two braided layers of high tensile synthetic yarn
• Cover: Polyurethylane compound
• Standard colour: Yellow
• Temperature range: -10°C up to +50°C -
Material Handling Transfer Hose - Beton 80
Beton 80 is enigineered to guarantee the maximum reliability and endurance fundamental for an industrial hose which has to work at 80 bar often very close to operators and in building sites located quite a distance from workshops. No matter if the hose hangs from cement mixer arms or pumps abrasive wet materials in a tunnel its robust and solid construction is a certainty for a rapid and well done job. For an extended reliability we can assemble the hose for you with swaged, full flow hardened couplings at one end or both ends.
Markets
• Building Construction
• Tunneling
• General Industrial
Features/Benefits
• Flexibility and kink resistance also for easier cleaning
• High abrasion resistant tube assuring longer service life
• Dedicated fitting series for a reliable complete solution
• Design Factor 2.5:1 enhances safety for operators and equipment
Applications
• Concrete, wet abrasive materials, grout, plaster, shotcrete
• Casing
• Concete injection -
Gas Hose - Carbo G NW/L 10 - NB/R 10
Carbo G NW/L 10 - NB/R 10 is designed for the connection of household appliances to the gas line (type NW/L) in indoor applications or to Liquefied Petroleum Gas (LPG) bottles (type NB/R) for outdoor applications. The premium grade materials with low permeation and superior resistance to aging and weathering guarantee a safe use. Additionally hose and production process is quarterly tested and supervised by the IMQ (Italian Institute of Quality Approval) to assure you a constant level of high quality.
Markets
• Domestic appliances
• Vocational
Features/Benefits
• Low permeability for a even safer use
• Available in long continuous lengths providing maximun versatility
• Design Factor Value 3:1 enhances safety for operators and equipment
• Superior tensile strength to resist to accidental tears
Applications
• Domestic gas, Liquefied Petroleum Gas (LPG)
• Gas stoves
• Gas barbecues and grills
• Camping burners
• Gas fireplaces -
Gas Hose - Propanpress EN ISO 3821 NA/L 20
Propanpress EN ISO 3821 NA/L 20 hose is suitable for Liquefied Petroleum Gas (LPG). Orange colored cover to match the EN specs indication for these types of fluids. Can be used either in industrial and domestic application because its high grade materials enable a safe use in all circumstances.
Markets
• Industrial
• Construction industry
Features/Benefits
• Pin Pricked cover to prevent blisters formation and potential explosion during use
• Available in long continuous lengths providing maximun versatility
• Design Factor 3:1 enhances safety for operators and equipment
• Excellent flexibility for ease of handling
Applications
• Liquefied Petroleum Gas (LPG), Natural Gas, propylene, propane -
Ducting Hose - Aspirex
Aspirex is a valid and economic proposal in all those cases where it is necessary to rapidly remove dust, fumes and shavings from working stations, to transport materials in-plants and in equipment.
Markets
• General Industrial
• Agriculture
Features/Benefits
• Self-extinguishing hose for an higher safety standard
• Smooth inner surface to avoid interference with material flow
Applications
• Vacuum service only
• Air, dust, fumes, wood-shavings
• Welding equipment -
SIAMEEZ® Grade T Twin Line Welding Hose Factory Assemblies,...
Parker's Series 7109 Siameez Grade T Twin Line Welding Hose Factory Assemblies provide excellent service across a wide variety of industrial and commercial applications. The chemically bonded dual hoses provide easier hose management and handling than independent single lines. The color coding allows easy identification for quick and accurate installation, and the cover resists abrasion, flame, oil and weathering to provide maximum performance. Series 7109 hose assemblies incorporate brass non-sparking permanent crimp couplings for a safe and secure connection.
Markets:
• Construction
• General Industrial
• Oil & Gas
Features/Benefits:
• Tube: Black chloroprene for flame and oil resistance, and compatibility with multiple fuel gases.
• Tube: Non-blooming to minimize the migration of combustible plasticizers and waxes to the surface of the hoses.
• Reinforcement: Multiple textile plies for strength and kink resistance.
• Cover: Chloroprene for abrasion, flame, oil and weathering resistance.
• Cover Colors: Green (oxygen) and red (fuel gas)
• Stock: Available in popular hose assembly configurations for quick delivery and order fulfillment.
Applications:
-media
• Industrial oxygen
• Welding fuel gas (including acetylene)
-usage
• Bending
• Brazing
• Cutting
• Fabricating
• Gouging
• Joining
• Piercing
• Preheating
• Post-heating
• Severing
• Soldering
• Straightening
• Surfacing
• Trimming
• Auto body shops
• Craft shops
• Garages
• Mines
• Oilfield
• Plumber shops
• Railyards
• Salvage
• Scrapyards
• Shipyards
• Steel mills
Industry Standards:
• ARPM IP-7
• CGA E-1
Safety/Technical:
• Design Factor: 4:1
Warnings:
• Do not attempt to re-couple, repair or splice hose assemblies; replace all assemblies that show signs of abrading, abuse, age, damage or fatigue. Refer to ARPM IP-7, Specifications for Rubber Welding Hose and Hose Technical Bulletin 11-5, Guide for Use, Maintenance and Inspection of Welding Hose. Refer to CGA Safety Bulletin SB-11, Use of Rubber Welding Hose. -
SIAMEEZ® Grade R Twin Line Welding Hose Factory Assemblies,...
Parker's Series 7126 Siameez Grade R Twin Line Welding Hose Factory Assemblies provide excellent service across a wide variety of industrial and commercial applications. The chemically bonded dual hoses provide easier hose management and handling than independent single lines. The cover resists abrasion and weathering to provide maximum performance, and is the hose provides versatile service for many common acetylene-based industrial welding applications. Series 7126 hose assemblies incorporate brass non-sparking permanent crimp couplings for a safe and secure connection.
Markets:
• Construction
• General Industrial
• Oil & Gas
Features/Benefits:
• Tube: Black EPDM for acetylene/oxygen compatibility.
• Tube: Non-blooming to minimize the migration of combustible plasticizers and waxes to the surface of the hoses.
• Reinforcement: Multiple textile plies for strength and kink resistance.
• Cover: EPDM for abrasion and weathering resistance.
• Cover Colors: Green (oxygen) and red (fuel gas, acetylene only)
• Stock: Available in popular hose assembly configurations for quick delivery and order fulfillment.
Applications:
-media
• Fuel gas (acetylene only)
• Oxygen
-usage
• Bending
• Brazing
• Cutting
• Fabricating
• Gouging
• Joining
• Piercing
• Preheating
• Post-heating
• Severing
• Soldering
• Straightening
• Surfacing
• Trimming
-setting
• Auto body shops
• Craft shops
• Garages
• Mines
• Oilfield
• Plumber shops
• Railyards
• Salvage
• Scrapyards
• Shipyards
• Steel mills
Industry Standards:
• ARPM IP-7
Safety/Technical:
• Design Factor: 4:1
• Do not use with any fuel gas other than acetylene.
Warnings:
• Do not attempt to re-couple, repair or splice hose assemblies; replace all assemblies that show signs of abrading, abuse, age, damage or fatigue. Refer to ARPM IP-7, Specifications for Rubber Welding Hose and Hose Technical Bulletin 11-5, Guide for Use, Maintenance and Inspection of Welding Hose. Refer to CGA Safety Bulletin SB-11, Use of Rubber Welding Hose. -
Wąż do przesyłu materiałów — Libeccio EN ISO 3861
Wąż Libeccio EN ISO 3861 zaprojektowano z myślą o usprawnieniu czynności związanych z usuwaniem mokrych i suchych proszków ściernych, materiałów do piaskowania i podobnych proszków. Idealny do czyszczenia, przygotowania lub usuwania powierzchni cementowych, stalowych, kamiennych i innych. Nadaje się do szerokiego zakresu zastosowań w prawie wszystkich gałęziach przemysłu i na większości rynków w warunkach, w których wymagany jest średniociśnieniowy, odporny na przetarcie wąż gumowy.
Rynki
• Budownictwo
• Aplikacje ogólnoprzemysłowe
• Przemysł morski
• Transport
Cechy i korzyści
• Wyższa jakość działania dzięki przekroczeniu wymagań normy EN ISO 3861
• Perforowana powłoka zapobiegająca powstawaniu pęcherzy i bąbelków, a tym samym wydłużająca żywotność
• Współczynnik konstrukcyjny 4:1 zwiększający bezpieczeństwo operatorów i sprzętu
Zastosowania
• Piaskowanie
• Usuwanie cementu, betonu i tynku
• Pojazdy ciężarowe transportujące ładunki masowe
• Transport/załadunek w zakładzie -
WILDCATTER® Oilfield Multipurpose Fracking Hose, Series...
Parker's Series 7311N/7311NXT Wildcatter Oilfield Multipurpose Fracking Hose is compatible with many oilfield media and provides excellent service across multiple drill site applications. The hose incorporates high pressure capabilities and features a cover that is resistant to abrasion, oil and weathering for maximum performance. Series 7311N/7311NXT offers long continuous lengths for maximum versatility, is qualified with permanent crimp couplings for a safe and secure connection and provides robust service life in challenging applications.
The Wildcatter trade name indicates the product is designed and manufactured for premium service in oilfield applications. However, Wildcatter products may be used in other industries, markets and applications where the product meets the required performance criteria.
Markets:
• Industrial
• Oil & Gas
Features/Benefits:
• Tube: Black Class A nitrile for exceptional fuel and oil resistance to 200°F.
• Reinforcement: Multiple textile plies for strength and durability, and dual static wires for a path to conduct an electrical charge to ground.
• Cover (7311N): Black nitrile blend for oil and weathering resistance and durability.
• Cover (7311NXT): Black nitrile blend with sleek UHMWPE finish for superior abrasion resistance and service life.
• Lengths: Available in optional 200-foot continuous lengths through 4" ID for maximum inventory versatility.
• Couplings: Qualified with steel crimp couplings for a durable, safe and secure connection.
Applications:
- media
• Biodiesel (to B20 in dedicated service)
• Brine
• Mild chemicals
• Diesel
• Drilling mud
• Ethanol
• Fracking fluids
• Gasoline
• Petroleum waste
• Slurries
• Water
- usage
• Blender units
• Hydration units
• Manifolds & pumps
• Tank to tank transfer
Safety/Technical:
• Design Factor: 4:1
Warnings:
• Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to NAHAD Industrial Hose Assembly Guidelines -
Wąż do roztworu mocznika w pojazdach — Carboblue N/L 10-20
Carboblue N/L 10-20 to wąż przeznaczony do dozowania lub transportu dodatków zawierających 32% wodnego roztworu mocznika (AUS 32). Może być stosowany w układach selektywnej redukcji katalitycznej (SCR) w takich pojazdach jak autobusy, ciężarówki i pojazdy terenowe z silnikami wysokoprężnymi.
Wszechstronne testy naszych materiałów opracowanych specjalnie do tego produktu dowiodły nieobecności cząstek stałych i substancji w moczniku. Ma to fundamentalne znaczenie dla zagwarantowania sprawności i wydajności układu SCR.
Rynki
• Transport
• Budownictwo
• Rolnictwo
Cechy i korzyści
• Wykonany ze specjalnych materiałów, które pozwalają uniknąć zanieczyszczenia mocznika
• Materiały niezawierające nitrozoamin bezpieczne dla środowiska naturalnego i jakości życia
• Współczynnik konstrukcyjny 3:1 zwiększa bezpieczeństwo operatorów i sprzętu
• Materiały odporne na obciążenia mechaniczne i środowiskowe
Zastosowania
• Transport mocznika
• Dozowanie -
Material Handling Transfer Hose - Cergom
Severe applications tend to consume traditional large diameter material handling hoses. Traditional rubber hose needs regular in-service inspection and maintenance, is subject to abrupt failure, creates unscheduled downtime and requires frequent replacement. For these harsh applications, Cergom hose provides virtually maintenance-free service life many times longer than traditional rubber material handling hose or other similar solution available in the market. For a superior investment in value and productivity, Cergom hose is the perfect choice for severe applications.
Markets
• Processing
• Energy
• Heavy Industry
• Mining
Features/Benefits
• Customized lengths to match your unique needs
• Special hexagonal ceramic tiles provide outstanding resistance at the abrasion
• Long lasting materials to reduce operations, logistics and admin costs
• Customized assemblies with built-in tech to offer a solid solution
• Design Factor 3:1 enhances safety for equipment and environment
Applications
• Ceramic powder, coal powder, dry cement, fiberglass
• Pneumatic suction and delivery lines of abrasive materials
• Fly ashes and raw materials
• Waste materials -
Breathing Air Refill Hose-526BA/527BA
Parkers’ Breathing Air Refill Hoses are available in 6,000 psi and 7,000 psi working pressure and comply with NFPA 1901 requirements for Fire Apparatus and CGA G7.1-1 Grade E Breathing Air Standards. These hoses are suitable for different tank fill applications, such as integrated containment fill stations, mobile and stationary systems with or without cascade controls, mobile trailer/truck systems and portable SCBA fill. The 526BA and 527BA do not contain conductive elements; therefore, they should not be used with explosive gases such as pure oxygen and hydrogen. For more information and technical specifications, please see below or refer to the Product Support tab to view our latest literature.
Markets:
• Industrial
Features/Benefits:
• Choice of 6,000 psi or 7,000 psi working pressures
Applications:
• Integrated containment fill stations
• Mobile and stationary systems with or without cascade controls
• Mobile trailer/truck systems
• Portable SCBA fill
• Compressed gas
Certifications/Compliance:
• CGA G7.1-1 Grade E Breathing Air Standards
• NFPA 1901
Technical Specifications:
• Tube: Nylon
• Reinforcement: Aramid Fiber
• 526BA Cover: Gray polyurethane, perforated
• 527BA Cover: Blue polyurethane, perforated
• Not for use as part of SCBA systems
• Not for use between a pressure reducing regulator and breathing mask
• For fitting attachment lubricate only with water or non-toxic lubricant
• Do not assemble with petroleum or hydrocarbon based lubricants
• Do not flush with solvents of any kind
• These hoses do not contain a conductive element; therefore, it should not be used with explosive gases such as pure oxygen and hydrogen
• Hoses are compliant with CGA Grade E Breathing Air Standards, however air quality is dependent upon all system components
• Hose I.D. is nominal
• Hose O.D. is maximum -
High pressure wire hose Chemjec - 2240M
Parker Polyflex 2240M Hoses for the Oil & Gas industry are designed for safety, versatility and efficiency, matching the tough requirements and expectations of the market place. Easy winching from drums reduces deployment or replacement times significantly. Long lengths allow operation in significant water depth and the durability of the hose assures maximized service life under extreme conditions.
Markets:
• Oil & Gas
Features/Benefits:
• Withstands high pressure cycles with no signs of stress cracking
• High collapse resistance (HCR) and also providing longer service life
• Extremly low permeability
• Meets or exceeds performance requirements of ISO 13628-5
Applications:
• Low volumetric expansion hose.
• Long length subsea umbilical hose.
• Chemical injection hose.
• Not recommended for gas applications
• For working pressure up to 43 MPa (6.250 psi)
Technical Specifications:
• Core tube : Fluoropolymer based core tube
• Pressure reinforcement : High strength wire
• Cover : PA12
• Colour: Golden
• Temperature Range: -40°C up to +100°C -
High pressure ChemJec hose - 2340M
Parker Polyflex 2340M Hoses for the Oil & Gas industry are designed for safety, versatility and efficiency, matching the tough requirements and expectations of the market place. Easy winching from drums reduces deployment or replacement times significantly. Long lengths allow operation in significant water depth and the durability of the hose assures maximized service life under extreme conditions.
Markets:
• Oil & Gas
• Industrial
Features/Benefits:
• Withstands high pressure cycles with no signs of stress cracking
• Extremly low permeability
• Meets or exceeds performance requirements of ISO 13628-5
Applications:
• Low volumetric expansion hose
• Long length subsea umbilical hose
• Chemical injection hose
• Not recommended for gas applications
• For working pressure up to 69 MPa (10.000 psi)
Technical Specifications:
• Core tube : Fluoropolymer based core tube
• Pressure reinforcement : High strength wire
• Cover : PA12
• Colour: Golden
• Temperature Range: -40°C up to +100°C -
High pressure ChemJec hose - 2370M
Parker Polyflex 2370M Hoses for the Oil & Gas industry are designed for safety, versatility and efficiency, matching the tough requirements and expectations of the market place. Easy winching from drums reduces deployment or replacement times significantly. Long lengths allow operation in significant water depth and the durability of the hose assures maximized service life under extreme conditions.
Markets:
• Oil & Gas
• Industrial
• Marine
Features/Benefits:
• Proven to handle methanol
• Extremly low permeability
• Meets or exceeds performance requirements of ISO 13628-5
• Available in long continous length up to 2.500 m
Applications:
• Low volumetric expansion hose
• Long length subsea umbilical hose
• Chemical injection hose
• Not recommended for gas applications
• Medium pressure, high temperature
• For working pressure up to 43 MPa (6.250 psi)
Technical Specifications:
• Core tube : Fluoropolymer based core tube
• Pressure reinforcement : High strength wire
• Cover : PA12
• Colour: Golden
• Temperature Range: -40°C up to +100°C -
High pressure ChemJec hose - 2448M
Parker Polyflex 2448M Hoses for the Oil & Gas industry are designed for safety, versatility and efficiency, matching the tough requirements and expectations of the market place. Easy winching from drums reduces deployment or replacement times significantly. Long lengths allow operation in significant water depth and the durability of the hose assures maximized service life under extreme conditions.
Markets:
• Oil & Gas
• Marine
Features/Benefits:
• Withstands high pressure cycles with no signs of stress cracking
• Proven to handle methanol
• High collapse resistance (HCR) and also providing longer service life
• Meets or exceeds performance requirements of ISO 13628-5
Applications:
• Low volumetric expansion hose
• Long length subsea umbilical hose
• Chemical injection hose
• Not recommended for gas applications
Technical Specifications:
• Core tube : Fluoropolymer based core tube
• Pressure reinforcement : High strength wire
• Cover : PA12
• Colour: Golden
• Temperature Range: -40°C up to +100°C -
Golden Eagle Hose with ColorGard™ - 2580M
Parker Polyflex 2580M Golden Eagle for the Oil & Gas industry are designed for safety, versatility and efficiency, matching the tough requirements and expectations of the market place. Easy winching from drums reduces deployment or replacement times significantly. Long lengths allow operation in significant water depth and the durability of the hose assures maximized service life under extreme conditions. Color Guard TM allows preventative maintenance to replace functional hoses in time before failure.
Markets:
• Oil & Gas
• Industrial
• Marine
Features/Benefits:
• COLORGARD, dual colour safety feature with extra thick cover for superior abrasion resistance
• Smaller OD than flexible pipe allows more hose per reel
• Excellent chemical resistance providing long service life in sea water
Applications:
• Acidizing
• Water and chemical injection
• Not recommended for gas applications
• For working pressure up to 69 MPa (10.000 psi)
Technical Specifications :
• Core tube : Fluorpolymer based inner core
• Pressure reinforcement : 6 layers of high tensile steel wire
• Cover : Extra thick dual layer TPU sheath
• Colour: ColorGard™ – red inner sheath and black outer sheath
• Temperature Range: -40°C up to +70°C, short term +100°C -
High pressure ChemJec hose - 2640M
Parker Polyflex 2640M Hoses for the Oil & Gas industry are designed for safety, versatility and efficiency, matching the tough requirements and expectations of the market place. Easy winching from drums reduces deployment or replacement times significantly. Long lengths allow operation in significant water depth and the durability of the hose assures maximized service life under extreme conditions.
Markets:
• Oil & Gas
• Industrial
Features/Benefits:
• Withstands high pressure cycles with no signs of stress cracking
• Proven to handle methanol
• Available in long continous length up to 3.000 m
• Meets or exceeds performance requirements of ISO 13628-5
Applications:
• Low volumetric expansion hose.
• Long length subsea umbilical hose.
• Chemical injection hose.
• Not recommended for gas applications
• For working pressure up to 103.5 MPa (15.000 psi)
Technical Specifications:
• Core tube : Fluoropolymer based core tube
• Pressure reinforcement : High strength wire
• Cover : PA12
• Colour: Golden
• Temperature Range: -40°C up to +100°C -
High pressure ChemJec hose - 2390M
Parker Polyflex 2390M Hoses for the Oil & Gas industry are designed for safety, versatility and efficiency, matching the tough requirements and expectations of the market place. Easy winching from drums reduces deployment or replacement times significantly. Long lengths allow operation in significant water depth and the durability of the hose assures maximized service life under extreme conditions.
Markets:
• Oil & Gas
• Marine
Features/Benefits:
• Low dimensional change under pressure and results in excellent response time
• Offshore design factor: 4:1
• Meets or exceeds performance requirements of ISO 13628-5
Applications:
• Low volumetric expansion hose
• Long length subsea umbilical hose
• Chemical injection hose
• Not recommended for gas applications
• For working pressure up to 34.5 MPa (5.000 psi)
Technical Specifications:
• Core tube: Fluoropolymer based core tube
• Pressure reinforcement : High strength wire
• Cover: PA12
• Colour: Golden
• Temperature Range: -40°C up to +100°C -
WILDCATTER® Oilfield Multipurpose Fracking Hose, Series 7331
Parker's Series 7331 Wildcatter Oilfield Multipurpose Fracking Hose is compatible with many oilfield media and provides excellent service across multiple drill site applications. The hose provides full suction capability and is crush resistant and kink resistant, and the cover resists abrasion, oil and weathering for durable performance. Series 7331 is qualified with permanent crimp couplings for a safe and secure connection, offers product consolidation opportunities and long continuous lengths for maximum inventory versatility, and provides robust service life in challenging applications.
The Wildcatter trade name indicates the product is designed and manufactured for premium service in oilfield applications. However, Wildcatter products may be used in other industries, markets and applications where the product meets the required performance criteria.
Markets:
• Industrial
• Oil & Gas
Features/Benefits:
• Tube: Black Class A nitrile for exceptional fuel and oil resistance to 200°F.
• Reinforcement: Multiple textile plies for strength and durability, and a wire helix for full suction capability and a path to conduct a static charge to ground.
• Cover: Black nitrile blend for oil and weathering resistance and durability.
• Lengths: Available in optional 200-foot continuous lengths through 4" ID for maximum inventory versatility and minimum scrap.
• Couplings: Qualified with steel crimp couplings for a durable, safe and secure connection.
Applications:
- media
• Biodiesel (to B20 in dedicated service)
• Brine
• Mild chemicals
• Diesel
• Drilling mud
• Ethanol
• Fracking fluids
• Gasoline
• Petroleum waste
• Slurries
• Water
- usage
• Bulk loading/unloading
• Tank to tank transfer
• Blender units
• Hydration units
• Manifolds & pumps
Safety/Technical:
• Design Factor: 4:1
• Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to NAHAD Industrial Hose Assembly Guidelines -
WILDCATTER® Oilfield High Pressure Chemical Hose, Series 7374
Parker's Series 7374 Wildcatter Oilfield High Pressure Chemical Hose provides excellent service across multiple drill site chemical applications. The hose will not contaminate the product being conveyed, and is crush resistant and durable. The distinctive blue cover is easily identified and resists abrasion, chemicals and weathering for maximum performance. Series 7374 is qualified with permanent crimp couplings for a safe and secure connection and provides robust service in challenging applications.
The Wildcatter trade name indicates the product is designed and manufactured for premium service in oilfield applications. However, Wildcatter products may be used in other industries, markets and applications where the product meets the required performance criteria.
Markets:
• Industrial
• Oil & Gas
Features/Benefits:
• Tube: Translucent ultra high molecular weight polyethylene (UHMWPE) for exceptional chemical resistance to 250°F.
• Reinforcement: Multiple textile plies for strength and durability, and a dual wire helix for full suction capability and a path to conduct a static charge to ground.
• Cover: Blue EPDM for abrasion and weathering resistance and durability.
• Lengths: Available in optional 200-foot continuous lengths through 4" ID for maximum inventory versatility and minimum scrap.
• Couplings: Qualified with steel crimp couplings for a durable, safe and secure connection.
Applications:
- media
• Acids
• Chemicals
• Slurries
• Solvents
- usage
• Oilfield blender service equipment
• Oilfield OEM aftermarket/replacement
Safety/Technical:
• Design Factor: 4:1
Warnings:
• It is the responsibility of the user to determine if the hose is suitable for the application. Most chemical resistance guides are based on temperatures of 70°F (21°C). Elevated temperatures can change the chemical resistance ratings. Many chemicals will become more aggressive as temperatures increase, reducing the ability of hose materials to withstand them. Contact Parker for chemical compatibility data at elevated temperatures. If no data exists, users are required to perform compatibility testing at the desired temperature.
• At operating temperatures of 125°F and above, only permanently attached couplings should be installed. At any operating temperature, couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to the NAHAD Industrial Hose Assembly Guidelines.
• Do not use with internally expanded couplings. Refer to chemical hoses that incorporate a MXLPE tube.
• Couplings attached with bands or clamps may reduce the working pressure of the hose assembly to less than the maximum rated working pressure of the hose. Refer to NAHAD Industrial Hose Assembly Guidelines. -
Explosive Emulsion dispensing hose. Series - EDHPN
EDHPN an explosive emulsion dispensing hose is a Parker proprietary product made for mining market in order to provide consistency of performance. Designed with a universal one-wire construction to meet global requirement & standards. It offers a long service life.
Markets:
• Mining.
• Contruction.
Features/Benefits:
• It has High abrasion resistant tube and cover.
• It has Ozone & weather resistant cover.
• It can handle abrasive material.
• It Can work in varied atmospheric conditions.
Applications:
• Dispensing of explosive emulsion in mobile delivery unit at blasting sites.
• Dispensing of explosive emulsion in drilled pits at blasting sites. -
Explosive Loading Hose - Series ANFO
Manufactured from materials with specific low static properties,to enable its use with explosives. The tube is semi-rigid allowing it to be coiled for ease of transport and storage but able to self support itself, a feature required in applications of long upholes where explosive needs to be loaded at the top of the hole. Upholes of up to 150 feet have been loaded using this tube. Manufactured to meet the requirements of AS 2187.2—Explosives—Storage, Transport, and Use. Part 2 use of explosives.
Markets;
• Mining
Features/Benefits:
• Temperature Rating 20mm = -20°C to +60°C
• Temperature Rating 25mm & 32mm = -20°C to +80°C
• Minimum resistance of 15kΩ/mtr
• Maximum resistance of <1.6Ω/coil
• Conforms to AS2187.2 - Explosives - Storage, transport and use.
• Custom lengths available
• Australian Made
Applications:
• ANFO Loading -
High pressure ChemJec hose - 2440M
Parker Polyflex 2440M Hoses for the Oil & Gas industry are designed for safety, versatility and efficiency, matching the tough requirements and expectations of the market place. Easy winching from drums reduces deployment or replacement times significantly. Long lengths allow operation in significant water depth and the durability of the hose assures maximized service life under extreme conditions.
Markets:
• Oil & Gas
• Marine
Features/Benefits:
• Withstands high pressure cycles with no signs of stress cracking
• Proven to handle methanol
• Extremly low permeability
• Meets or exceeds performance requirements of ISO 13628-5
Applications:
• Low volumetric expansion hose
• Long length subsea umbilical hose
• Chemical injection hose
• Not recommended for gas applications
• For working pressure up to 86.5 MPa (12.500 psi)
Technical Specifications:
• Core tube : Fluoropolymer based core tube
• Pressure reinforcement : High strength wire
• Cover : PA12
• Colour: Golden
• Temperature Range: -40°C up to +100°C -
Compressed Natural Gas Hose - Regulated Pressure - CNGRP
To accommodate on-vehicle applications, Parflex has developed a high temperature, regulated pressure CNG (CNGRP) Hose. The CNGRP is a low permeation, CSA listed hose that is designed for low pressure delivery of CNG fuel downstream of the pressure regulator in high ambient temperature environments. It is constructed with an electrically conductive Nylon core to dissipate static build up and stainless steel reinforcement for corrosion and kink resistance. In addition, the thermoplastic vulcanizate (TPV) jacket provides protection from outdoor elements encountered in on-vehicle applications.
Markets:
• Transportation
• Automotive
Features/Benefits:
• Electrically conductive nylon core tube
• Flexible TPV cover
• Specifically designed for applications downstream of the pressure regulator
• Low permeation Nylon core tube
• SS braid reinforcement allowing compact bend radius
Conforms to:
• ANSI/CSA NGV 3.1
• NFPA 52
• CSA 12.3, Class C
• CSA Listing (Certificate# 70102698)
Applications:
• Fleet transit
• CNG fuel transfer
Technical Specifications:
• Tube: Electrically conductive nylon
• Reinforcement: Stainless Steel
• Cover: Red TPV
• CNG hose must be assembled at the factory or by a Parflex approved facility
• Hose I.D. is nominal
• Hose O.D. is maximum -
Seamless Convoluted PTFE with Nomex® Braid - NCW/NCB
Parker Nomex braided hose assemblies offer superior flexibility, allowing them to route through tight areas and eliminate RFI issues seen in many applications having stainless steel reinforcements. They are also less susceptible to cracking from stress or flexing than metal hose assemblies. For abrasion resistance, a polyester monofilament scuff sleeve can be added.
A Nomex braided hose is extremely light weight and about 40% lighter than a typical stainless steel braided hose. With nearly the same temperature resistance, up to 400°F, Nomex is a much cooler reinforcement allowing operators to handle hoses without the risk of a burn. These hoses are sold as factory-made assemblies only and it is available with a static dissipative core tube.
Markets:
• Pharmaceutical
• Food & Beverage
• Cosmetics
• Industrial
Features/Benefits:
• Very light weight
• Superior flexibility
• Kink and vacuum resistant
• Eliminates RFI issues
• Available with a static dissipative core tube
Conforms to:
• FDA 21 CFR 177.1550
• USP Class VI
• ISO 10993 Sections 5, 6, 10, 11
Applications:
• Fluid handinling
• Chemical transfer
• Paint
Technical Specifications:
• Tube: Natural Convoluted PTFE
• Reinforcement: Nomex
• Available with a static dissipative core tube (NCB)
• Used with PAGE Series fittings
Nomex® is a registered trademark of E. I. du Pont de Nemours and Company. -
High Pressure ParLock Multispiral Hose CEM69TC - API 7K
Parker's ParLock Multispiral hose CEM69TC according to API 7K with Interlock technology is designed for cementing hose applications with a flexible connection between the cementing pump manifold and the cementing head for conveyance of cement slurries at high pressure.
Markets:
• Natural Resources
Features:
• Interlock technology
• Reinforcement of six high tensile steel wire
• Highly abrasion resistant Tough Cover
• Design Factor 1:2,25
• MSHA approved
• Antistatic properties
Applications:
• Dedicated for cementing hose applications.
Parker's High Pressure ParLock Multispiral Cementing Hose is compatible with the Parker ParLock skive type fittings V6. -
Średniociśnieniowy wąż typu No-Skive Parkrimp HT2
Średniociśnieniowy wąż typu No-Skive HT2 firmy Parker stanowi doskonałe rozwiązanie w układach hydraulicznych średniego ciśnienia w przypadku ogólnych zastosowań wysokotemperaturowych. Ta linia węży została zaprojektowana i wyprodukowana z zastosowaniem zaawansowanych materiałów i technologii oraz przetestowana, aby spełnić wymagania eksploatacyjne normy SAE100 R16. Mały promień gięcia zapewnia elastyczność wymaganą do pracy w ciasnych przestrzeniach przy maksymalnej temperaturze do 135°C. Uzupełnieniem gamy węży średniociśnieniowych firmy Parker jest kompletna oferta zgodnych łączników typu No-Skive ze stali i stali nierdzewnej.
Rynki:
• Transport materiałów
• Sprzęt budowlany
• Leśnictwo
• Rolnictwo
• Transport
• Technika wojskowa
Cechy i korzyści:
• System dopasowanych węży i łączników gwarantuje sprawdzoną i bezpieczną kombinację, najwyższą jakość i bezpieczeństwo, a także najdłuższy okres eksploatacji ostatecznego produktu przez użytkowników końcowych.
• Małe promienie gięcia pozwalają używać ich w zastosowaniach, w których przestrzeń i łatwość montażu mają decydujące znaczenie.
• Materiały wysokiej jakości pozwalają na uzyskanie cienkiej powłoki i mniejszej masy.
• Duża elastyczność ułatwia montaż i wydłuża okres eksploatacji.
• Powłoki o wysokiej odporności na ozon zwiększają odporność na warunki atmosferyczne i starzenie.
• Kompaktowa konstrukcja ułatwia prowadzenie.
• Kompletna technologia montażu No-Skive w całej gamie węży średniociśnieniowych zapewnia prostszy, szybszy i bezpieczniejszy montaż węży.
Zastosowania:
• Średniociśnieniowe układy hydrauliczne ogólnego zastosowania oraz zastosowania wymagające małego promienia gięcia.
• Wiele zastosowań przemysłowych i mobilnych
• Wspomagane układy kierownicze w maszynach rolniczych
Węże średniociśnieniowe HT2 firmy Parker są zgodne z łącznikami średniociśnieniowymi Parkrimp serii 48 firmy Parker. -
High Collapse Resistant Hose - HCR
Parker Parflex HCR hose is specifically designed to serve the oil & gas market in subsea hydraulics. HCR Hose is constructed with a flexible stainless steel interlocking carcass, a seamless polyamide core tubing, aramid fiber braid reinforcement, and an abrasion- and seawater-resistant polyurethane cover. These features combine to offer a working pressure of 5,000 psi (34.5 MPa) with a 4-to-1 design factor. The industry leading bend radius allows for tight routing. These features combine to offer a solution to withstand the rigors of the oil & gas industry.
Markets:
• Subsea Hydraulics
• Oil & GasFeatures/Benefits:
• Collapse resistant to 10,000 ft seawater at 1.5 design factor per API 17E
• Flexible stainless steel interlocking carcass
• Available in long continuous lengths
• Seamless polyamide core tube handles wide range of media
• Abrasion and seawater resistant polyurethane cover
• Compact bend radius allows for easy routing
• Industry desired colors available - blue, yellow and greenApplications:
• Hydraulics
• BOP Stack
• Well Stimulation
• Hydraulic Flying LeadsTechnical Specifications:
• Carcass: Interlocking Stainless Steel
• Core tube: Polyamide
• Reinforcement: Aramid Fiber Braid
• Cover: Polyurethane
• Hose I.D. is nominal
• Hose O.D. is maximumNote:
• 1.5 design factor for collapse pressure per API 17E
• Contact the Parflex Division for installation depths greater than 10,000 ft. -
Constant High Pressure 35,0 MPa No-Skive Multispiral Hose...
Parker’s SX35LT hose was designed to deliver consistency and reliability in extreme cold conditions with a constant working pressure of 35,0 MPa. The SX35LT hose is made with special Parker compound specially designed for stong low temperature applications up to - 57°C.
Markets:
• Construction equipment
• Forestry
• Mining
• Industrial
• MobileFeatures/Benefits:
• Good flexibility up to -57° C
• SX35LT is a high performance hose with a constant working pressure of 35.0 MPa.
• Temperature range from -57°C up to +100°C
• Complete No-Skive fitting technology across the full range of high pressure hoses providing simpler, quicker and
safer hose assemblyApplications:
• Petroleum base hydraulic fluids and lubricating oils
• All mobile high pressure applications
• Forestry and mining machines
• Materials handling machines in refrigerated warehousesCompatible Fittings:
• 73 series fittings -
Wąż wielospiralny typu No-Skive do stałego wysokiego...
Wąż SX42LT firmy Parker zaprojektowano, aby zapewnić stałe parametry eksploatacyjne i niezawodność w skrajnie niskich temperaturach przy stałym ciśnieniu roboczym wynoszącym 42,0 MPa. Wąż SX42LT jest wykonany ze specjalnego materiału firmy Parker zaprojektowanego specjalnie do zastosowań w bardzo niskiej temperaturze sięgającej nawet -57°C.
Rynki:
• Sprzęt budowlany
• Leśnictwo
• Górnictwo
• Przemysł
• Zastosowania mobilneCechy i korzyści
• Wysoka elastyczność nawet do -57°C
• SX42LT to wąż o wysokich parametrach przeznaczony do pracy pod stałym ciśnieniem roboczym wynoszącym 42,0 MPa.
• Zakres temperatur od -57°C do +100°C
• Kompletna technologia montażu No-Skive w całej gamie węży wysokociśnieniowych zapewnia prostszy, szybszy i
bezpieczniejszy montaż węży.Zastosowania
• Płyny hydrauliczne i oleje smarowe na bazie ropy naftowej
• Wszystkie mobilne zastosowania wysokociśnieniowe
• Maszyny leśnicze i górnicze
• Maszyny do transportu materiałów w magazynach-chłodniachZgodne łączniki:
• Łączniki serii 73/77 -
Ultra High Pressure Waterblast Hose - 55,000 psi - 2849D
Parker Ultra High Pressure 2849D Hoses are developed for ultra high pressure water jet cutting equipment with water or with abrasive additives. Available in TOUGHJACKET™ design to eliminate bulky, PVC cover featuring 16% more abrasion resistance than PVC (see TOUGHJACKET Series). These hoses often replace steel pipe where flexibility is important.
Markets:
• Water jet cutting
• All markets requiring pressures of 55,000 psi for cutting applications
Features/Benefits:
• 55,000 psi
• Available in TOUGHJACKET design to eliminate bulky, PVC cover featuring 16% more abrasion resistance than PVC (see TOUGHJACKET Series)
• Compliant with DIN EN 1829-2
• ColorGard™ Technology for a more reliable & safer operation
Applications:
• Water jet cutting equipment -
Tough Cover Ultra High Pressure Water Jetting Hose - 2440D/2448D
Parker High Pressure Water Jetting Hoses are developed for very high pressure applications. They are used in high pressure service tube cleaning applications, such as, heat exchanger tube cleaning in the chemical and refining industries and as ultra high pressure waterblast hoses. They handle pressures up to 43,000 psi (3000 bar) and are available with the Tough Cover jacket for improved abrasion resistance.
Markets:
• Hydrodemolition
• Ship Building
• Refineries
• Industrial markets requiring pressures over 21,000 psi for cleaning applications
Features/Benefits:
• Operating pressures up to 43,000 psi (3000 bar)
• Compliant with DIN EN 1829-2
• Available with a Tough Cover jacket, for improved abrasion resistance in many applications.
Applications:
• Tube cleaning such as heat ex-changers in the chemical and oil refining industries
• Hydrodemolition and removal of accumulated dirt from concrete, asphalt and tanks
• Industrial cleaning with working pressure up to 43,000 psi (3000 bar)
Technical Specifications:
• Core tube: Polyoxymethylene
• Pressure reinforcement: Four spiral layers of high tensile steel wire
• Cover: Polyamide
• Standard color: blue, gray orange (dependent on hose)
• Temperature range: +14°F up to +158°F -
Ultra High Pressure Hose - 2440N/2448N
Parker Ultra High Pressure Hoses handle high pressures up to 15,000 psi (1,035 bar) with low volumetric expansion. They are flexible, chemical resistant and a lightweight alternative to steel pipe and rubber hose. The V91 hoses are used in offshore applications such as control fluids, acidizing, methanol injection and well stimulation.
Markets:
• Upstream Oil & Gas
• Land-based and offshore
• Industrial markets requiring pressures over 8,000 psi
Features/Benefits:
• Operating pressures up to 15,000 psi (1035 bar)
• Compliant with ISO 13628-5
• Methanol-washed core tube for improved performance in well stimulation
Applications:
• Acidizing
• Control fluids
• Hydraulics
• Methanol injection
• Well stimulation
Technical Specifications:
• Core tube: Methanol-washed PA11
• Pressure reinforcement: Four spiral layers of high tensile steel wire
• Cover: PA12
• Standard color: black
• Temperature range: -40°F up to +212°F -
Small Bore High Pressure Mini Hydraulic Hose – 2020N
High pressure 2020N Polyflex hoses feature a very small hose I.D. and are rated up to 6,890 psi. They are used anywhere high pressure services require a very small hose O.D. such as mini-hydraulic and gas applications. Parker 2020N hose assemblies feature extremely long lengths which reduce potential leak points by eliminating multiple adaptors and they show low dimensional change under pressure, resulting in excellent response times with very low pressure drops.
Markets:
• Upstream Oil & Gas
• Land-based and offshore
• Industrial
Features/Benefits:
• Small I.D. hose with compact O.D.
• Good flexibility
• Continuous long lengths without splices
• Available in twin line constructions
Applications:
• Mini-hydraulic systems
• Gas applications
• Measuring systems
• Diagnostic systems -
Parker Oil & Gas Hose and Hydraulic Hose - 2390N
High pressure Polyflex 2390N hoses are rated up to 7,000 psi and are used in oil and gas hydraulic systems, portable hydraulic tools and as subsea control lines. Assemblies are robust yet lightweight, weighing up to 20% less than comparable rubber hoses. Parker hose assemblies feature extremely long lengths which reduce potential leak points by eliminating multiple adaptors and low dimensional change under pressure, resulting in excellent response times with very low pressure drops.
Markets:
• Upstream Oil & Gas
• Land-based and offshore
• Industrial
• Subsea
Features/Benefits:
• Low dimensional change under pressure resulting in excellent response times
• Smooth bore for low pressure drop
• Meets or exceeds the performance requirements of ISO 13628-5
• Low volumetric expansion
• Continuous long lengths without splices
• Available in twin line constructions
• Seawater-resistant polyurethane jacket
Applications:
• Hydraulic systems
• Hydraulic tools and jacks
• Subsea control lines -
Parker Oil & Gas Hose and Hydraulic Hose - 2380N/2388N
High pressure 2380N/2388N hoses are rated up to 15,950 psi and are used in oil and gas hydraulic systems, or portable hydraulic tools and as subsea control lines (-16 hose). Parker high pressure hose assemblies are robust yet lightweight, weighing up to 20% less than comparable rubber hoses. Hose assemblies feature extremely long lengths which reduce potential leak points by eliminating multiple adaptors and low dimensional change under pressure, resulting in excellent response times with very low pressure drops.
Markets:
• Upstream Oil & Gas
• Land-based and offshore
• Industrial
• Subsea
Features/Benefits:
• Flexible and lightweight
• Low volumetric pressure
• Replaces high pressure rigid tubing where flexibility is important
• Continuous long lengths without splices
• Available in twin line constructions
Applications:
• Hydraulic systems
• Hydraulic tools and jacks
• Grease injection
• Rescue equipment
• Subsea control lines (-16 hose only)
Technical Specifications:
• Core tube: Polyamide
• Pressure reinforcement: Two spiral layers of high tensile steel wire
• Cover: Polyurethane or seawater-resistant polyurethane jacket
• Standard color: Black, Blue, Green, Red, Yellow
• Temperature range: -40°F up to +212°F -
Parker Oil & Gas Hose and Hydraulic Hose - 2022N
High pressure 2022N hoses are rated to 10,000 psi and are used in oil and gas applications, hydraulic systems, and as subsea umbilicals. The 2022N hoses are robust yet lightweight, weighing up to 20% less than comparable rubber hoses. Hose assemblies feature extremely long lengths which reduce potential leak points by eliminating multiple adaptors and low dimensional change under pressure, resulting in excellent response times with very low pressure drops.
Markets:
• Upstream Oil & Gas
• Land-based and offshore
• Subsea
Features/Benefits:
• Flexible and lightweight
• Replaces steel pipe where flexibility is important
• Smooth bore for improved performance and low pressure drops
• Continuous long lengths without splices
• Meets or exceeds performance requirements of SAE J517/J343
Applications:
• Hydraulic systems
• Subsea production umbilicals
• Oilfield pressure control devices
• Offshore oil applications – fluid control, acidizing, methanol injection, well stimulation
• Tools and jacks
• Test apparatus
Technical Specifications:
• Sizes from 1/4” up to 1/2”
• Polyurethane or seawater-resistant polyurethane jacket
• Polyamide core tube or polyamide methanol washed
• Aramid fiber braid -
Ultra High Pressure Waterblast Hose - 2440N
Parker 2440N hoses are developed for high pressure waterblast applications handling pressures up to 20,000 psi (1,400 bar). They are available with a TOUGHJACKET™ (TJ) cover to eliminate the bulky, PVC cover. A TJ cover features 16% more abrasion resistance than PVC (see TOUGHJACKET Series). They also feature a built in ColorGard™ sheath, giving operators easy visualization of core tube erosion for more efficient product inspections and reduced unscheduled downtime. These hoses often replace steel pipe where flexibility is important.
Markets:
• Waterblast/Waterjet
• Hydrodemolition
• Construction
• Industrial markets requiring pressures of 14,000 psi or higher
Features/Benefits:
• Operates up to 20,000 psi
• Low volumetric expansion
• Compact design (20% smaller than comparable hoses) promotes easy handling and space
• Replaces steel pipe when flexibility is needed
• Compliant with DIN EN 1829-2
• Available in TOUGHJACKET design to eliminate bulky, PVC cover featuring 16% more abrasion
• ColorGard™ Technology for a more reliable & safer operation
Applications:
• Hydrodemolition
• Waterblast cleaning equipment
• Industrial cleaning
Technical Specifications:
• Core tube: Polyamide
• Pressure reinforcement: Four spiral layers of high tensile steel wire
• Cover: Polyamide (Additional TPU TOUGHJACKET cover available)
• Standard color: Yellow, Blue
• Temperature range: +14°F up to +158°F -
Ultra-High Pressure Water Jetting Hose - 2840D/2848D
Parker 2840D and 2848D hoses are developed for high and ultra high pressure applications handling pressures up to 58,000 psi (4,000 bar). They are both available with a TOUGHJACKET™ (TJ) cover to eliminate the bulky, PVC cover and a TJ cover features 16% more abrasion resistance than PVC (see TOUGHJACKET Series). Additionally, they feature a built in ColorGard™ sheath, giving operators easy visualization of core tube erosion for more efficient product inspections and reduced unscheduled downtime. These hoses often replace steel pipe where flexibility is important.
Markets:
• Hydroforming
• Waterblast/Waterjet
• Shipbuilding
• Industrial markets requiring pressures of 58,000 psi
Features/Benefits:
• Operates up to 58,000 psi
• Compact design (20% smaller than comparable hoses) promotes easy handling and space
• Replaces steel pipe when flexibility is needed
• Compliant with DIN EN 1829-2
• Available in TOUGHJACKET design to eliminate bulky, PVC cover featuring 16% more abrasion
• ColorGard™ Technology for a more reliable & safer operation
Applications:
• Hydroforming (compression forming process)
• Water jet cutting equipment
• Waterblast cleaning equipment
Technical Specifications:
• Core tube: Polyoxymethylene
• Pressure reinforcement: Eight spiral layers of maximum tensile steel wire
• Cover: Polyamide (Additional TPU TOUGHJACKET cover available)
• Standard color: Red, Orange, Gray
• Temperature range: +14°F up to +158°F -
Ultra High Pressure Water Jetting Hose - 2740D/2748D/2749D
Parker 2740D Water Jetting Hose feature a compact design to promote easy handling for operators. It is used in ultra-high applications like hydroforming, hydrodemolition and water jet cutting
Markets:
• Shipbuilding
• Water jet cutting
• Automotive
• Hydrodemolition
• Industrial Cleaning
• All markets requiring pressures over 36,000 psi for their cleaning applications
Features/Benefits:
• Compact design promotes easy handling
• Compliant with DIN EN 1829-2
• Available with a TOUGHJACKET Cover, for improved abrasion resistance without an additional PVC cover
Applications:
• Water jet cutting
• Tube cleaning in petrochemical plants and power plants
• Hydroforming (compression forming process)
• Surface cleaning on ships
• Water jetting equipment
• Waterblast equipment
• Industrial cleaning with working pressure up to 40,000 psi (3000 bar) -
High Pressure Tube Cleaning - Water Blast Hose - 2240D/2248D
Parker Polyflex High Pressure 2240D/2248D Hoses are developed for high and ultra high pressure applications. Their compact hose design (20% smaller than competitor hoses, promotes easy handling for operators. They are used in high pressure service tube cleaning applications, such as, heat exchanger tube cleaning in the chemical and refining industries and as waterblast hoses. In flexible lance applications, they can handle pressures above 13,000 psi. Available with a Tough Cover, for improved abrasion resistance in many applications.
Markets:
• Semiconductor
• Marine
• Refineries
• Water jet cutting
• All markets requiring pressures over 13,000 psi for their cleaning and cutting applications
Features/Benefits:
• Compact design (20% smaller than comparable hoses) promotes easy handling and space improvements
• Compliant with DIN EN 1829-2
• Available with a Tough Cover, for improved abrasion resistance in many applications
Applications:
• Tube cleaning such as heat exchangers in the chemical and oil refining industries
• Applications as flexible lance at working pressures of over 13,000 psi
• Industrial cleaning with working pressure up to 21,750 psi
Technical Specifications:
• Core tube: Polyoxymethylene
• Pressure reinforcement: Two spiral layers of high tensile steel wire
• Cover: Polyamide
• Standard color: blue or green (dependent on hose)
• Temperature range: +14°F up to +158°F -
Ultra High Pressure Waterblast Hose - 2380N/2388N
Parker 2380N and 2388N hoses are developed for high pressure waterblast applications handling pressures up to 18,000 psi (1,200 bar). They are both available with a TOUGHJACKET™ (TJ) cover to eliminate the bulky, PVC cover and a TJ cover features 16% more abrasion resistance than PVC (see TOUGHJACKET Series). Additionally, they feature a built in ColorGard™ sheath, giving operators easy visualization of core tube erosion for more efficient product inspections and reduced unscheduled downtime. These hoses often replace steel pipe where flexibility is important.
Markets:
• Waterblast/Waterjet
• Construction
• Industrial markets requiring pressures of 14,000 psi or higher
Features/Benefits:
• Operates up to 18,000 psi
• Up to 35% lighter weight for a 20 meter hose assembly when compared to rubber hose
• High kink resistance
• Compact design (20% smaller than comparable hoses) promotes easy handling and space
• Replaces steel pipe when flexibility is needed
• Compliant with DIN EN 1829-2
• Available in TOUGHJACKET design to eliminate bulky, PVC cover featuring 16% more abrasion
• ColorGard™ Technology for a more reliable & safer operation
Applications:
• Waterblast cleaning equipment
• Industrial cleaning -
High Pressure Water Jetting Hose - 2640N/2648N
Parker 2640D Ultra High Pressure Water Jetting Hoses promote easy handling for operators and handle pressures up to 40,600 psi. They are used in ultra-high pressure water jetting and industrial cleaning applications, construction, hydrodemolition and shipbuilding. They are ideal for removing different kinds of dirt accumulation, or materials, from various surfaces in tanks and from concrete, asphalt, etc.
Markets:
• Shipbuilding
• Construction
• Hydrodemolition
• Industrial Cleaning
• All markets requiring pressures over 36,000 psi for their cleaning applications
Features/Benefits:
• Compact design promotes easy handling
• Compliant with DIN EN 1829-2
Applications:
• Tank cleaning
• Surface cleaning on ships
• Water jetting equipment
• Waterblast equipment
• Industrial cleaning with working pressure up to 40,000 psi (2800 bar) -
High Pressure Water Jetting Hose - 2640D
Parker 2640D Ultra High Pressure Water Jetting Hoses promote easy handling for operators and handle pressures up to 40,600 psi. They are used in ultra-high pressure water jetting and industrial cleaning applications, construction, hydrodemolition and shipbuilding. They are ideal for removing different kinds of dirt accumulation, or materials, from various surfaces in tanks and from concrete, asphalt, etc.
Markets:
• Shipbuilding
• Construction
• Hydrodemolition
• Industrial Cleaning
• All markets requiring pressures over 36,000 psi for their cleaning applications
Features/Benefits:
• Compact design promotes easy handling
• Compliant with DIN EN 1829-2
Applications:
• Tank cleaning
• Surface cleaning on ships
• Water jetting equipment
• Waterblast equipment
• Industrial cleaning with working pressure up to 40,000 psi (2800 bar)
Technical Specifications:
• Core tube: Polyoxymethylene
• Pressure reinforcement: Six spiral layers of maximum tensile steel wire
• Cover: Polyamide
• Standard color: orange or gray (dependent on hose)
• Temperature range: +14°F up to +158°F -
Parker Oil & Gas Hose and Hydraulic Hose - 2340N-24
High pressure 2340N-24 hose was specifically designed for subsea production or repair in the oil & gas market. Its state of the art construction makes this high pressure hydraulic hose suitable for a wide range of land based, off shore and subsea applications. It is a viable alternative to rubber hose, which often fails due to inner tube blistering when the fluid permeates into the rubber core tube.
Markets:
• Upstream Oil & Gas
• Land-based and offshore
• Industrial
Features/Benefits:
• Moisture ingression resistant
• Available in long continuous lengths
• Cost effective solution to rubber hoses
• API 17E and ABS approved
• Seawater-resistant polyurethane jacket
Applications:
• Subsea BOP Supply
• Acidizing
• Well Stimulation
• Cementing