Cylindry hydrauliczne

HMIX Series metric tie rod hydraulic feedback cylinders are Compact Series cylinders rated for use at working pressures up to 210 bar depending on the rod end and type of service. Like all Parker hydraulic cylinders, they are designed to deliver long, efficient service with low maintenance requirements, guaranteeing high productivity year after year.

Parker's HMIX series cylinders meet the requirements of ISO 6020/2 (2006), 160 Bar Compact Series and the DIN 24 554 standard. HMIX series cylinders are based on the proven HMI Series and are supplied with integrated feedback transducer and manifold.

A wide range of optional features is available, permitting HMIX cylinders to be customised to suit even the most challenging industrial application. Options include oversize ports, stop tubes, stroke limiters, gland drains, rod end protection and more. Where only a totally bespoke cylinder will do, our experienced design engineers will work with you to create a unique customised solution.

• Working pressure up to 210 bar
• Bore sizes – 40mm to 200mm
• Piston rod diameters – 28mm to 140mm
• Strokes – up to 3000mm
• Fluids and seals – five seal types to suit a wide range of fluid specifications
• Temperature ranges – -20°C to +85°C depending on fluid and seal types
• 8 standard mounting styles
• 3 rod sizes per bore
• Up to 3 male and 3 female rod end threads per bore
• Wide range of special features

Applications
• Machine tools
• Transfer lines
• Injection moulding
• Paper machinery
• Presses
• Flight simulators
• Marine stabilization
• Aerial and antennae positioning systems
• Welding equipment
• Test equipment
• Robotics

2H series tie rod hydraulic cylinders are heavy duty, inch-dimensioned cylinders rated for use at working pressures up to 210 bar depending on the rod end and type of service. Like all cylinders from Parker hydraulics, they are designed to deliver long, efficient service with low maintenance requirements, guaranteeing high productivity with low cost of ownership, year after year.

A wide range of optional features is available, permitting 2H cylinders to be customised to suit even the most challenging industrial application. Options include feedback transducers and position switches, integral cushions, oversize ports, stop tubes, stroke limiters, gland drains, rod end protection and more. Where only a totally bespoke cylinder will do, our experienced design engineers will work with you to create a unique customised solution.

Standard Specification
• Working pressure up to 210 bar
• Bore sizes – 38.1mm to 304.8mm (1.1/2 to 12 inches)
• Piston rod diameters – 15.9mm to 215.9mm (5/8 to 8.1/2 inches)
• 17 standard mounting styles
• Up to 4 rod sizes per bore
• Up to 8 standard male and female rod end threads per bore
• Strokes – available in any practical stroke length
• Single and double rod designs available
• Cushions – available at either or both ends
• Fluids and seals – five seal types to suit a wide range of fluid specifications
• Temperature ranges – -20°C to +150°C depending on fluid and seal types
• Wide range of mounting and rod end accessories
• Wide range of special features

Applications
• Machine tools
• Transfer lines
• Injection moulding
• Presses
• Test equipment
• Robotics

3L series tie rod hydraulic cylinders are heavy duty, inch-dimensioned cylinders rated for use at working pressures up to 70 bar depending on the rod end and type of service. Like all cylinders from Parker Hydraulics, they are designed to deliver long, efficient service with low maintenance requirements, guaranteeing high productivity with low cost of ownership, year after year.

A wide range of optional features is available, permitting 3L cylinders to be customised to suit even the most challenging industrial application. Options include feedback transducers and position switches, integral cushions, oversize ports, stop tubes, stroke limiters, gland drains, rod end protection and more. Where only a totally bespoke cylinder will do, our experienced design engineers will work with you to create a unique customised solution.

Standard Specification
• Working pressure up to 70 bar
• Bore sizes – 25.4mm to 203.2mm (1 to 8 inches)
• Piston rod diameters – 12.7mm to 139.7mm (1/2 to 5.1/2 inches)
• 15 standard mounting styles
• Up to 9 rod sizes per bore
• 3 standard male and female rod end threads per bore
• Strokes – available in any practical stroke length
• Single and double rod designs available
• Cushions – available at either or both ends
• Fluids and seals – five seal types to suit a wide range of fluid specifications
• Temperature ranges – -46°C to +150°C depending on fluid and seal types
• Wide range of mounting and rod end accessories
• Wide range of special features

Applications
• Machine tools
• Transfer lines
• Clamping & positioning
• Woodworking equipment
• Test equipment
• Robotics

Parker Series CHD steel body cylinders are your best choice for high force requirements with operating pressures up to 207 bar, and are available in 1mm stroke length increments, with four standard piston rod end styles to choose from, plus configurable special rod ends.

In addition to 1mm stroke length increments, flexible piston rod end machining and optional end-of-stroke position sensing availability, Series CHD incorporates a multitude of innovative design features that increase machine productivity through reduced downtime, faster cycle times, and improved system efficiency.

• Primary Seal – The standard polyurethane rod seal with multiple sealing edges is self-compensating and self-relieving to withstand pressure variations and conform to mechanical deflection that may occur.
• Secondary Rod Seal – The standard polyurethane Wiperseal™ wipes clean any oil film adhering to the rod on the extend stroke and cleans the rod on the return stroke.
• Non-Metallic Wear Band – Metal-to-metal contact in the cylinder bore is eliminated, which improves resistance to bearing loads.
• Bi-directional Piston Seal – A single energized polyurethane seal ring with energizer provides leak-free performance.
• Optional Pilot Gland – Longer pilot gland offers added bearing area to increase service life and also improves alignment of cylinder and load.
• Manifold Ports – Available foot mounting with manifold ports enhances machine design flexibility.

Every Series CHD cylinder is individually tested before leaving our plant to assure proper performance and leak free operation and comes with an eighteen month warranty.


Specifications
Standards – Reference ISO 16656: 2004
Working pressure – up to 207 bar
Standard Fluid –hydraulic oil
Temperature range – -23°C to +121°C (depending on seal class)
Bore Diameters – 20mm, 25mm, 32mm, 40mm, 50mm, 63mm, 80mm
Piston Rod Diameters – 12mm, 14mm, 18mm, 22,mm, 28mm, 36mm, 45mm
Standard mounting styles – 13 styles: T, TN, TR, A, AM, AN, AR, MN, MR, J, H, C, CN
Strokes – up to 125mm (configurable in 1mm increments) depending on bore size
Piston Rod Ends - Four standard metric or imperial dimensioned ends; specials made to order
Rod Construction – Single and double rod available

Additional Information:
Zinc plated nodular iron gland with long bearing surface
Polyurethane rod seal and double lip wiperseal
Chrome plated piston rod
One-piece nodular iron piston
Energized polyurethane, bi-directional piston seal ring
SAE "O" ring ports, NPTF ports and BSPP ports are available

Parker Series CHE aluminum body cylinders are your best choice for high force requirements with operating pressures up to 140 bar, and are available in 1mm stroke length increments, with four standard piston rod end styles to choose from, plus configurable special rod ends.

In addition to 1mm stroke length increments, flexible piston rod end machining and optional end-of-stroke, mid-stroke and continuous stroke position sensing availability, Series CHE incorporates a multitude of innovative design features that increase machine productivity through reduced downtime, faster cycle times, and improved system efficiency.

• Primary Seal – The standard polyurethane rod seal with multiple sealing edges is self-compensating and self-relieving to withstand pressure variations and conform to mechanical deflection that may occur.
• Secondary Rod Seal – The standard polyurethane Wiperseal™ wipes clean any oil film adhering to the rod on the extend stroke and cleans the rod on the return stroke.
• Non-Metallic Wear Band – Metal-to-metal contact in the cylinder bore is eliminated, which improves resistance to bearing loads.
• Bi-directional Piston Seal – A single energized polyurethane seal ring with energizer provides leak-free performance.
• Optional Pilot Gland – Longer pilot gland offers added bearing area to increase service life and also improves alignment of cylinder and load.
• Magnetic Piston – Optional magnetic piston can be selected for actuating solid state or reed switches plus a unique t-slot mounted continuous stroke position sensor.
• CPS Sensor – Teachable t-slot mounted sensor with voltage or current output give continuous stroke position feedback.

Every Series CHE cylinder is individually tested before leaving our plant to assure proper performance and leak free operation and comes with an eighteen month warranty.

Tech Specifications
Standards – Reference ISO 16656: 2004
Working pressure – up to 140 bar for 20mm – 40mm bores; up to 120 bar for 50mm bore; up to 100 bar for 63mm – 100mm bores
Standard Fluid –hydraulic oil
Temperature range – -23°C to +121°C (depending on seal class)
Bore Diameters – 20mm, 25mm, 32mm, 40mm, 50mm, 63mm, 80mm, 100mm
Piston Rod Diameters – 12mm, 14mm, 18mm, 22,mm, 28mm, 36mm, 45mm, 56mm
Standard mounting styles – 6 styles: T, TN, TR, J, H, CA
Strokes – up to 165mm (configurable in 1mm increments) depending on bore size
Piston Rod Ends - Four standard metric or imperial dimensioned ends; specials made to order
Rod Construction – Single and double rod available

Additional Information:
Zinc plated nodular iron gland with long bearing surface
Polyurethane rod seal and double lip wiperseal
Chrome plated piston rod
One-piece nodular iron piston
Energized polyurethane, bi-directional piston seal ring
SAE "O" ring ports, NPTF ports and BSPP ports are available

Series 2HX / 2HDX and Series 3HX / 3HDX Electrohydraulic Cylinders are engineered for your feedback / control systems, featuring an integrated assembly that eliminates transducer mounting brackets, valve manifolds, hoses and other items associated with using separate components. The versatility of the Series 2HX / 2HDX and Series 3HX / 3HDX allows you to design an actuator for accurate position and velocity control for your specific application.

Series 2HX / 2HDX and Series 3HX 3HDX Electrohydraulic Actuators are offered with bolt-on or integral manifold and/or position sensing devices with the following choices.

• Three Feedback Options:
Intellinder™ – Parker proprietary optical reading of an etched piston rod provides absolute position sensing and has the option of redundancy when multiple readers are installed. Analog output available.
LDT – Linear displacement transducer is solid state non-contact style that is installed in a hollow piston rod and provides absolute position sensing via a movable magnet, mounted to the piston that travels along a magnetostrictive waveguide. The LDT can either be screwed into the cap of the cylinder or embedded in the cap to permit rear pivot mounting styles. Analog and digital outputs available.
LRT – The linear potentiometer is installed in a hollow piston rod and embedded in the cylinder cap. It uses a resistive element and contacting wiper that changes the resistive load proportional to its position along the cylinder stroke. Analog output only.

• Electrical output – Both Analog (Voltage, Current) and Digital (Start/Stop, PWM, SSI, J1939) are available depending on feedback option selected.

• Two Valve Manifold Options minimize hydraulic line runs with closed cylinder and valve coupling:
Bolt-on Manifold – Select from 7 standard valve mounting patterns that can bolted to either the head or cap and do not affect the standard envelope and mounting dimensions of the cylinder.
Integral Cap Manifold – Select from 4 standard valve mounting patterns that can be supplied at position #1 on the cap.

Every Series 2HX / 2HDX and Series 3HX / 3HDX cylinder is individually tested before leaving our plant to assure proper performance and leak free operation and comes with an eighteen month warranty.

Specifications
• Heavy Duty Service – ANSI/(NFPA) T3.6.7R3 – 2009 Specifications and Mounting Dimension Standards
• Standard Construction – square head – tie rod design
• Nominal Pressure – 3000 psi
• Standard Fluid – hydraulic oil
• Standard Temperature – -10°F to +165°F
• Bore Diameters – 2.00", 2.50", 3.25", 4.00", 5.00", 6.00", 7.00", 8.00"
• Piston Rod Diameter – 1.000", 1.375", 1.750", 2.000", 2.500", 3.000", 3.500", 4.000", 4.500", 5.000", 5.500"
• Standard mounting styles – 18 styles: T, TB, TC, TD, J, JB, JJ, H, HB, HH, C, F, BB, D, DB, DD, DE, SB
• Strokes – available in any practical stroke length
• Cushions – optional at either end or both ends of stroke.
• Rod Ends – Four standard choices: Thread Style 4 (NFPA Style SM) Small Male, Thread Style 8 (NFPA Style IM) Intermediate Male, Thread Style 9 (NFPA Style SF) Small Female, Thread Style 55 Flanged Rod End – specials to order
• Series 2HX / 3HX – Threaded Jewel Gland with TS 2000 Rod Seal
• Series 2HDX / 3HDX – Bolt-On Rod Gland with Tri-Lip Rod Seal

HMD Series metric tie rod hydraulic cylinders are Compact Series cylinders rated for use at working pressures up to 210 bar depending on the rod end and type of service. Like all cylinders from Parker Hydraulics, they are designed to deliver long, efficient service with low maintenance requirements, guaranteeing high productivity year after year. Parker's HMD series metric cylinders meet the requirements of DIN 24554, 160 Bar Compact Series.
To generate a CAD model of an HMD Series cylinder, please follow the steps for the equivalent HMD Series cylinder.

A range of optional features such as different mounting styles and piston rod diameters is available, permitting HMD cylinders to be customised to suit different industrial applications. A more extensive range of options is available for HMD Series cylinders, including feedback transducers and position switches, cushions, oversize ports, stop tubes, stroke limiters, gland drains, rod end protection and more. Where only a totally bespoke cylinder will do, our experienced design engineers will work with you to create a unique customised solution.

• Working pressure up to 210 bar
• Bore sizes – 25mm to 200mm
• Piston rod diameters – 12mm to 140mm
• Strokes – available in any practical stroke length
• Five standard mounting styles
• Two rod sizes per bore
• Fluids and seals – five seal types to suit a wide range of fluid specifications
• Temperature ranges – -20°C to +150°C depending on fluid and seal types

Applications
• Machine tools
• Transfer lines
• Injection moulding
• Presses
• Test equipment
• Robotics

HMI Series metric tie rod hydraulic cylinders are Compact Series cylinders rated for use at working pressures up to 210 bar depending on the rod end and type of service. Like all cylinders from Parker Hydraulics, they are designed to deliver long, efficient service with low maintenance requirements, guaranteeing high productivity year after year. Parker's HMI series metric cylinders meet the requirements of ISO 6020/2, 160 Bar Compact Series.
To generate a CAD model of an HMI Series cylinder, please follow the steps for the equivalent HMI Series cylinder.

A range of optional features such as different mounting styles and piston rod diameters is available, permitting HMI cylinders to be customised to suit different industrial applications. A more extensive range of options is available for HMI Series cylinders, including feedback transducers and position switches, cushions, oversize ports, stop tubes, stroke limiters, gland drains, rod end protection and more. Where only a totally bespoke cylinder will do, our experienced design engineers will work with you to create a unique customised solution.

• Working pressure up to 210 bar
• Bore sizes – 25mm to 200mm
• Piston rod diameters – 12mm to 140mm
• Strokes – available in any practical stroke length
• Twelve standard mounting styles
• Up to three rod sizes per bore
• Fluids and seals – five seal types to suit a wide range of fluid specifications
• Temperature ranges – -20°C to +150°C depending on fluid and seal types

Applications
• Machine tools
• Transfer lines
• Injection moulding
• Presses
• Test equipment
• Robotics

Parker Series 3L cylinders provide value through proven reliability, efficient performance, and quality that you expect from every Parker Cylinder Division product line. Each Series 3L cylinder incorporates design features one would not expect to see in a 1,000 psi nominally rated cylinder. These features include the “Jewel” rod gland, adjustable floating cushions, hard chrome plated piston rods, and high strength tie rods with rolled threads instead of cut threads.

In addition to the “Jewel” rod gland assembly and hard chrome plated piston rods Series 3L incorporate a multitude of innovative design features that increase machine productivity through reduced downtime, faster cycle times, and improved system efficiency.

• Primary Rod Seal – The TS-2000 Rod Seal is a proven leakproof design – completely self-compensating and self-relieving to withstand variations and conform to mechanical deflection that may occur.

• Secondary Rod Seal – Double-Service Wiperseal™ wipes clean any oil film adhering to the rod on the extend stroke and cleans the rod on the return stroke.

• Body End Seals – Pressure actuated cylinder body-to-head and cap “O” rings provide leak free service.

• Adjustable Floating Cushions – For maximum performance Parker cushions are economical and flexible for even the most demanding applications. They provide superior performance in reducing shock. Cushions are optional and can be supplied at head end, cap end, or both ends without change in envelope or mounting dimensions.

• One-Piece Nodular Iron Piston – The wide piston surface contacting cylinder bore reduces bearing loads. The one piece design is piloted to the piston rod, assuring concentricity.

• Lipseal™ Piston – Piston Lipseals operate with zero leakage under static conditions Lipseals are self-compensating to conform to variations in pressure, mechanical deflection / wear and are installed with a back-up washer to prevent extrusion.

Every Series 3L cylinder is individually tested before it leaves our facility to ensure proper performance and leak free operation and comes with an eighteen month warranty.

Specifications
• Medium Duty Service – ANSI/(NFPA) T3.6.7R3-2009 Specifications and Mounting Dimension Standards
• Standard Construction – square head – tie rod design
• Nominal Pressure – 1000 psi dependent on bore size
• Standard Fluid – hydraulic oil
• Standard Temperature – -10°F to +165°F
• Bore Sizes – 1.00", 1.50", 2.00", 2.50", 3.25", 4.00", 5.00", 6.00", 8.00"
• Piston Rod Diameter – 0.500", 0.625", 1.000", 1.375", 1.750", 2.000", 2.500", 3.000", 3.500", 4.000", 4.500", 5.000", 5.500"
• Mounting Styles – 16 standard styles: T, TB, TC, TD, J, JB, JJ, H, HB, C, F, BB, D, DB, DD, SB
• Strokes – available in any practical stroke length
• Cushions – optional at either end or both ends of stroke. “Float Check” at cap end.
• Rod Ends – four standard choices: Thread Style 4 (NFPA Style SM) Small Male, Thread Style 8 (NFPA Style IM) Intermediate Male, Thread Style 9 (NFPA Style SF) Small Female, Thread Style 55 Flanged Rod End – specials to order
• Gland - “Jewel” rod gland assembly, externally removable without cylinder disassembly

Parker is one of the largest independent manufacturers of single-acting telescoping hydraulic cylinders. Built to customer prints or per application specifications as either single- or double-acting to fit the needs of a range of applications.

Features include:
• Longer sleeve overlap for improved stability and higher column loading.
• Nylon tipped set screws that conform to the shape of the packing nut threads. It is nearly impossible for the packing nut to back off accidentally.
• Snap-on, glass-filled bearings that absorb contaminants without damaging cylinder walls.
• Threaded steel stop rings for easier servicing and more reliable stopping action.
• External packing nuts give added support to the tube exterior while making service procedures easier.
• Wave springs and chevron packing for self-compensating seals.
• Polyurethane rod wipers that resist higher temperatures without extrusion.
• Positive manual air bleeder prevents cavitation and “mushy” cylinder action.
• Cast steel mountings offer dependable strength. Pin-eye and rod-end are welded into a single unit.
• Various materials and coatings including Stainless Steel, Electroless Nickel, Chrome, Double Chrome and Nitriding


Available with:
• Bore sizes – up to 20”
• Stroke – up to 500"
• Various Operating Fluids
• Batch Sizes 1PC to 100’s
• Operating pressures – up to 10,000 PSI

Typical Options:
• Load holding valves
• Flow controls and fuses
• End of stroke cushions
• Electro-Hydraulic Transducers
• End of Stroke Hydraulic Cushions
• Protective Rod Boots
• Proximity Switches

Every cylinder is individually tested before leaving our plant to assure proper performance and leak-free operation. All Parker cylinder products carry an eighteen month warranty.

Parker Series 2H/3H Gen II Heavy Duty Hydraulic Cylinders set the standard for performance, durability, and trouble free operation. Parker's superior design, the use of high quality materials and stringent manufacturing practices provide all customers with long cylinder service life and reduced operating costs. Design features such as “Jewel” rod gland assembly, hard chrome plated piston rods, and stepped cushions provide increased machine productivity.

In addition to the “Jewel” rod gland assembly and hard chrome plated piston rods Series 2H/3H, Series 2HD/3HD & Series 2HB/3HB incorporate a multitude of innovative design features that reduce downtime and provide improved system efficiency as a result of faster cycle times.
• Primary Rod Seal – in Series 2H/3H the TS-2000 Rod Seal and in Series 2HD/3HD and 2HB/3HB the Tri-Lip Rod seal are a proven leakproof designs – completely self-compensating and self-relieving to withstand variations and conform to mechanical deflection that may occur.
• Secondary Rod Seal – the standard polyurethane Double-Service Wiperseal™ wipes clean any oil film adhering to the rod on the extend stroke and cleans the rod on the return stroke.
• Body End Seals – Pressure actuated polyurethane cylinder body-to-head and cap “O” rings provide leak free service.
• Floating Stepped Cushions with Captive Needle Valve – For maximum performance Parker cushions are economical and flexible for even the most demanding applications. They provide superior performance in reducing shock. Cushions are optional and can be supplied at head end, cap end, or both ends without change in envelope or mounting dimensions.
• Universal Piston Design – Parker’s new universal piston seal design addresses the performance balance between low pressure sealability, low friction, extrusion resistance and seal life. One piston style is used for all piston seal and wear ring configurations and will suit all application requirements.

Every Series 2H/3H, Series 2HD/3HD & Series 2HB/3HB cylinder is individually tested before leaving our plant to assure proper performance and leak free operation and comes with an eighteen month warranty.

Tech Specifications Tab
Heavy Duty Service – ANSI/(NFPA) T3.6.7R3 – 2009 Specifications and Mounting Dimension Standards
Standard Construction – square head – tie rod design 2H/3H, 2HD/3HD & non-tie rod 2HB/3HB
Nominal Pressure – 3000 psi
Standard Fluid – hydraulic oil
Standard Temperature – -10°F to +165°F
Bore Diameters – 1.50", 2.00", 2.50", 3.25", 4.00", 5.00", 6.00”, 7.00”, 8.00”
Piston Rod Diameter – 0.625", 1.000", 1.375", 1.750", 2.000, 2.500", 3.000", 3.500", 4.000", 4.500”, 5.000”, 5.500”
Standard mounting styles – 18 styles: T, TB, TC, TD, J, JB, JJ, H, HB, HH, C, F, BB, D, DB, DD, DE, SB, SE
Strokes – available in any practical stroke length
Cushions – optional at either end or both ends of stroke.
Rod Ends – Four standard choices: Thread Style 4 (NFPA Style SM) Small Male, Thread Style 8 (NFPA Style IM) Intermediate Male, Thread Style 9 (NFPA Style SF) Small Female, Thread Style 55 Flanged Rod End – specials to order
Series 2H/3H - Threaded Jewel Gland with TS 2000 Rod Seal
Series 2HD/3HD, 2HB/3HB - Bolt-On Rod Gland with Tri-Lip Rod Seal

Parker Series CHD steel body hydraulic cylinders are your best choice for high force requirements with operating pressures up to 207 bar, and are available in 1mm stroke length increments. Four standard piston rod end styles are available, in addition to configurable special rod ends.

Series CHD compact metric hydraulic cylinders incorporate a polyurethane rod seal with multiple sealing edges, a polyurethane Wiperseal™, and a non-metallic piston wear band. The bi-directional Piston Seal provides leak-free performance, increasing machine productivity through reduced downtime, faster cycle times and improved system efficiency. Optional end-of-stroke position sensors are available.

Every Series CHD hydraulic cylinder is individually tested before leaving our plant to assure proper performance and leak free operation, with an 18 month warranty.

Markets:
• Industrial
• Processing

Features/Benefits:
• Configurable in 1mm stroke increments
• Four standard piston rod end style plus configurable special rod ends
• Durable polyurethane rod seal and wiperseal for assuring dry rod performance
• End-of-stroke sensor option
• Individual testing of each cylinder for reliability
• Eighteen month warranty

Applications:
• Factory Automation
• Machine Tools
• Molding
• Food & Beverage
• Plastic Processing

Parker Series CHE aluminum body hydraulic cylinders are your best choice for high force requirements with operating pressures up to 140 bar, and are available in 1mm stroke length increments. Four standard piston rod end styles are available, in addition to configurable special rod ends.

Series CHE compact metric hydraulic cylinders incorporate a polyurethane rod seal with multiple sealing edges, a polyurethane Wiperseal™, and a non-metallic piston wear band. The bi-directional Piston Seal provides leak-free performance, increasing machine productivity through reduced downtime, faster cycle times and improved system efficiency. An optional magnetic piston can be selected for actuating solid state or reed switches and also a unique t-slot mounted continuous stroke position sensor.

Every Series CHE hydraulic cylinder is individually tested before leaving our plant to assure proper performance and leak free operation, with an 18 month warranty.

Markets:
• Industrial
• Processing

Features/Benefits:
• Configurable in 1mm stroke increments
• Four standard piston rod end style plus configurable special rod ends
• Durable polyurethane rod seal and wiperseal for assuring dry rod performance
• Magnetic piston option
• Individual testing of each cylinder for reliability
• Eighteen month warranty

Applications:
• Factory Automation
• Machine Tools
• Molding
• Food & Beverage
• Plastic Processing

2H series tie rod hydraulic cylinders are heavy duty, inch-dimensioned cylinders rated for use at working pressures up to 210 bar depending on the rod end and type of service. Like all cylinders from Parker hydraulics, they are designed to deliver long, efficient service with low maintenance requirements, guaranteeing high productivity with low cost of ownership, year after year.

To generate a CAD model of an 2H Series cylinder, please follow the steps for the equivalent 2H Series cylinder by using the CUSTOM CONFIGURATOR button.

A wide range of optional features is available, permitting 2H cylinders to be customised to suit even the most challenging industrial application. Options include feedback transducers and position switches, integral cushions, oversize ports, stop tubes, stroke limiters, gland drains, rod end protection and more. Where only a totally bespoke cylinder will do, our experienced design engineers will work with you to create a unique customised solution.

Markets:
Energy
• Energy Production, Development & Service
• Power Generation

Government (Non-Aerospace)
• Defense
• Government (Non-Defense)

Industrial
• Factory Automation
• Entertainment Automation
• Machine Tools
• Molding
• Packaging Machinery
• Vehicle Assembly Facilities

Natural Resources
• Mining
• Oil & Gas

Processing
• Food & Beverage
• Industrial Chemical Processing
• Lumber & Wood
• Plastic Processing
• Primary Metal Refining/Process
• Rubber & Tie Processing

Features/Benefits:
• 17 standard mounting styles
• Single and double rod designs available
• Up to 8 standard male and female rod end threads per bore
• Rod gland can be removed in situ for seal replacement
• Hard chrome plated rod for increased seal and cylinder life
• Wide range of sealing systems to suit all applications and environments
• Suitable in a wide range of fluid specifications and temperature ranges from -20°C to +150°C
• Rod locking device for increased safety and functionality
• World class cushioning solutions, available at either or both ends
• Wide range of mounting and rod end accessories
• Wide range of special features, e.g. stroke adjuster, rod bellow, gland drain, proximity switches or integrated linear transducers
• Bespoke custom designs on request

Applications:
• Presses
• Plastic Injection Molding
• Plastic Blow Molding
• Automotive Transfer Lines
• Die Casting
• Machining Center
• Assembly Line
• Steel Processing
• Aluminium Processing
• Paper Machinery
• Cement Industry

* Made by Industrial Hydraulics Division China

HMI Series metric tie rod hydraulic cylinders are Compact Series cylinders rated for use at working pressures up to 210 bar depending on the rod end and type of service. Like all cylinders from Parker Hydraulics, they are designed to deliver long, efficient service with low maintenance requirements, guaranteeing high productivity year after year. Parker's HMI series metric cylinders meet the requirements of ISO 6020/2, 160 bar Compact Series.

To generate a CAD model of an HMI Series cylinder, please follow the steps for the equivalent HMI Series cylinder by using the CUSTOM CONFIGURATOR button.

A wide range of optional features such as different mounting styles and piston rod diameters is available, permitting HMI cylinders to be customised to suit different industrial applications. A more extensive range of options is available for HMI Series cylinders, including feedback transducers and position switches, cushions, oversize ports, stop tubes, stroke limiters, gland drains, rod end protection and more. Where only a totally bespoke cylinder will do, our experienced design engineers will work with you to create a unique customised solution.

Markets:
Energy
• Energy Production, Development & Service
• Power Generation

Government (Non-Aerospace)
• Defense
• Government (Non-Defense)

Industrial
• Factory Automation
• Entertainment Automation
• Machine Tools
• Molding
• Packaging Machinery
• Vehicle Assembly Facilities

Natural Resources
• Mining
• Oil & Gas

Processing
• Food & Beverage
• Industrial Chemical Processing
• Lumber & Wood
• Plastic Processing
• Primary Metal Refining/Process
• Rubber & Tie Processing

Features/Benefits:
• 12 standard mounting styles
• Single and double rod designs available
• 6 standard male and female rod end threads
• Up to 3 rod sizes per bore
• Strokes available in any practical stroke length
• Rod gland can be removed in situ for seal replacement
• Hard chrome plated rod for increased seal and cylinder life
• Wide range of sealing systems to suit all applications and environments
• Suitable in a wide range of fluid specifications and temperature ranges from -20°C to +150°C
• Rod locking device for increased safety and functionality
• World class cushioning solutions, available at either or both ends
• Wide range of mounting and rod end accessories
• Wide range of special features, e.g. stroke adjuster, rod bellow, gland drain, proximity switches or integrated linear transducers
• Bespoke custom designs on request

Applications:
• Machine tools
• Transfer lines
• Injection moulding
• Presses
• Test equipment
• Robotics
• Machining Center
• Assembly Line

* Made by Industrial Hydraulics Division China

HMD Series metric tie rod hydraulic cylinders are Compact Series cylinders rated for use at working pressures up to 210 bar depending on the rod end and type of service. Like all cylinders from Parker Hydraulics, they are designed to deliver long, efficient service with low maintenance requirements, guaranteeing high productivity year after year. Parker's HMD series metric cylinders meet the requirements of DIN 24554, 160 bar Compact Series.

To generate a CAD model of an HMD Series cylinder, please follow the steps for the equivalent HMD Series cylinder by using the CUSTOM CONFIGURATOR button.

A wide range of optional features such as different mounting styles and piston rod diameters is available, permitting HMD cylinders to be customised to suit different industrial applications. A more extensive range of options is available for HMD Series cylinders, including feedback transducers and position switches, cushions, oversize ports, stop tubes, stroke limiters, gland drains, rod end protection and more. Where only a totally bespoke cylinder will do, our experienced design engineers will work with you to create a unique customised solution.

Markets:
Energy
• Energy Production, Development & Service
• Power Generation

Government (Non-Aerospace)
• Defense
• Government (Non-Defense)

Industrial
• Factory Automation
• Entertainment Automation
• Machine Tools
• Molding
• Packaging Machinery
• Vehicle Assembly Facilities

Natural Resources
• Mining
• Oil & Gas

Processing
• Food & Beverage
• Industrial Chemical Processing
• Lumber & Wood
• Plastic Processing
• Primary Metal Refining/Process
• Rubber & Tie Processing

Features/Benefits:
• 5 standard mounting styles
• Single and double rod designs available
• 6 standard male and female rod end threads
• 2 rod sizes per bore
• Strokes available in any practical stroke length
• Rod gland can be removed in situ for seal replacement
• Hard chrome plated rod for increased seal and cylinder life
• Wide range of sealing systems to suit all applications and environments
• Suitable in a wide range of fluid specifications and temperature ranges from -20°C to +150°C
• Rod locking device for increased safety and functionality
• World class cushioning solutions, available at either or both ends
• Wide range of mounting and rod end accessories
• Wide range of special features, e.g. stroke adjuster, rod bellow, gland drain, proximity switches or integrated linear transducers
• Bespoke custom designs on request

Applications:
• Machine tools
• Transfer lines
• Injection moulding
• Presses
• Test equipment
• Robotics
• Machining Center
• Assembly Line

* Made by Industrial Hydraulics Division China

The Hybrid Actuation System (HAS) is ideal for linear motion applications, suitable for both mobile and industrial markets. The new hybrid design combines the controllability of electromechanical actuators with the power density, longer life, and resistive force capabilities of a traditional hydraulic system. The result is an all-in-one actuation system that eliminates the screw wear points commonly found in electromechanical cylinders and the need for a hydraulic power unit, hoses and valving. Like all cylinders from Parker hydraulics, they are designed to deliver long, efficient service with low maintenance requirements, guaranteeing high productivity with low cost of ownership, year after year.

To generate a CAD model of an HAS 500 Series cylinder, please follow the steps for the equivalent HAS 500 Series cylinder by using the CUSTOM CONFIGURATOR button.

This high-efficiency, modular system allows for various traditional cylinder mounting configurations and stroke lengths. Offered in our series HS2 NFPA mounting and series HSR roundline cylinder design. The hybrid design is a fully self-contained system with no hydraulic hoses or external power units. The units come completely flushed and filled with Parker’s DuraClean™ premium hydraulic fluid, maintenance-free operations up to and beyond 10,000 hours.

Markets:
Energy
• Energy Production, Development & Service
• Power Generation

Government (Non-Aerospace)
• Defense
• Government (Non-Defense)

Industrial
• Factory Automation
• Entertainment Automation
• Machine Tools
• Molding
• Packaging Machinery
• Vehicle Assembly Facilities

Processing
• Food & Beverage
• Industrial Chemical Processing
• Lumber & Wood
• Plastic Processing
• Primary Metal Refining/Process
• Rubber & Tie Processing

Features/Benefits:
• Simple speed, direction and force control via analog inputs or serial bus communications.
• 230/460V AC, 24-48V DC power options.
• No hydraulic lines or power unit needed, self-contained complete system.
• Flushed clean to ISO 16/14/11 and filled with fluid for maintenance-free operation.
• Chrome Plated Rod standard. Global Shield and Stainless also available. (HY08-4000-B2).
• Load Holding options include Counterbalance and PO check valves.
• Modular system allows for various traditional cylinder mounting styles and stroke lengths.
• Available in NFPA Mounting configuration (HS2), with continuous feedback devices (HS2X) and round line construction (HSR).
• Crown wiper for harsh dirty environment to ensure fluid integrity

Applications:
• Presses
• Plastic Injection Molding
• Plastic Blow Molding
• Automotive Transfer Lines
• Die Casting
• Machining Center
• Assembly Line
• Steel Processing
• Aluminum Processing
• Paper Machinery
• Cement Industry

210 bar Industrial Hydraulic Cylinders conforming to to ISO 6020/2. The tie rod construction sets the standard for performance, durability and trouble-free operation with superior design and quality to ensure long cylinder service life. The HMIF is available to you at fast despatch. With lots of options to choose from, the new e-configurator will assist you in the configuration of the individual cylinder. Fast Track ensures a despatch time of 3 days only.

To generate a CAD model of an HMIF Series cylinder simply use the e-CONFIGURATOR button.

A wide range of optional features such as different mounting styles and piston rod diameters is available, permitting HMIF cylinders to be customised to suit different industrial applications. A more extensive range of options is available for HMI Series cylinders, including feedback transducers and position switches, special cushions, oversize ports, stop tubes, stroke limiters, gland drains, rod end protection and more. Where only a totally bespoke cylinder will do, our experienced design engineers will work with you to create a unique customised solution.

Markets:
Energy
• Energy Production, Development & Service
• Power Generation

Government (Non-Aerospace)
• Defense
• Government (Non-Defense)

Industrial
• Factory Automation
• Entertainment Automation
• Machine Tools
• Molding
• Packaging Machinery
• Vehicle Assembly Facilities

Natural Resources
• Mining
• Oil & Gas

Processing
• Food & Beverage
• Industrial Chemical Processing
• Lumber & Wood
• Plastic Processing
• Primary Metal Refining/Process
• Rubber & Tie Processing

Features/Benefits:
• 8 standard mounting styles
• Single and double rod designs available
• 6 standard male and female rod end threads
• Up to 3 rod sizes per bore
• Strokes available in any practical stroke length
• Rod gland can be removed in situ for seal replacement
• Hard chrome plated rod for increased seal and cylinder life
• Wide range of sealing systems to suit all applications and environments
• Suitable in a wide range of fluid specifications and temperature ranges from -20°C to +150°C
• Rod locking device for increased safety and functionality
• World class cushioning solutions, available at either or both ends
• Wide range of mounting and rod end accessories
• Bespoke custom designs on request

Applications:
• Machine tools
• Transfer lines
• Injection moulding
• Presses
• Test equipment
• Robotics
• Machining Center
• Assembly Line